ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 095 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 168 100 050 Pre-fail Offline - 162
3 Spin_Up_Time 0x0007 106 099 024 Pre-fail Always - 492 (Average 447)
4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 6544
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 1 (0, 1)
7 Seek_Error_Rate 0x000b 100 076 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 132 100 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 4045
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 6539
192 Power-Off_Retract_Count 0x0032 095 095 000 Old_age Always - 6548
193 Load_Cycle_Count 0x0012 095 095 000 Old_age Always - 6548
194 Temperature_Celsius 0x0002 171 127 000 Old_age Always - 35 (Min/Max 15/49)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 47 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 47 occurred at disk power-on lifetime: 4036 hours (168 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a8 40 5b e1 Error: UNC 8 sectors at LBA = 0x015b40a8 = 22757544
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 a8 40 5b e0 08 01:23:06.200 READ DMA EXT
ec 00 00 00 00 00 a0 08 01:23:06.200 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 08 01:23:06.200 SET FEATURES [set transfer mode]
ec 00 00 00 00 00 a0 08 01:23:06.200 IDENTIFY DEVICE
25 00 08 a8 40 5b e0 08 01:23:00.400 READ DMA EXT
Error 46 occurred at disk power-on lifetime: 4036 hours (168 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a8 40 5b e1 Error: UNC 8 sectors at LBA = 0x015b40a8 = 22757544
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 a8 40 5b e0 08 01:23:00.400 READ DMA EXT
ec 00 00 00 00 00 a0 08 01:23:00.400 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 08 01:23:00.400 SET FEATURES [set transfer mode]
ec 00 00 00 00 00 a0 08 01:23:00.400 IDENTIFY DEVICE
25 00 08 a8 40 5b e0 08 01:22:54.700 READ DMA EXT
Error 45 occurred at disk power-on lifetime: 4036 hours (168 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a8 40 5b e1 Error: UNC 8 sectors at LBA = 0x015b40a8 = 22757544
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 a8 40 5b e0 08 01:22:54.700 READ DMA EXT
ec 00 00 00 00 00 a0 08 01:22:54.700 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 08 01:22:54.700 SET FEATURES [set transfer mode]
ec 00 00 00 00 00 a0 08 01:22:54.700 IDENTIFY DEVICE
25 00 08 a8 40 5b e0 08 01:22:49.000 READ DMA EXT
Error 44 occurred at disk power-on lifetime: 4036 hours (168 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a8 40 5b e1 Error: UNC 8 sectors at LBA = 0x015b40a8 = 22757544
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 a8 40 5b e0 08 01:22:49.000 READ DMA EXT
ec 00 00 00 00 00 a0 08 01:22:49.000 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 08 01:22:49.000 SET FEATURES [set transfer mode]
ec 00 00 00 00 00 a0 08 01:22:49.000 IDENTIFY DEVICE
25 00 08 a8 40 5b e0 08 01:22:43.300 READ DMA EXT
Error 43 occurred at disk power-on lifetime: 4036 hours (168 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a8 40 5b e1 Error: UNC 8 sectors at LBA = 0x015b40a8 = 22757544
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 a8 40 5b e0 08 01:22:43.300 READ DMA EXT
ec 00 00 00 00 00 a0 08 01:22:43.300 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 08 01:22:43.300 SET FEATURES [set transfer mode]
ec 00 00 00 00 00 a0 08 01:22:43.300 IDENTIFY DEVICE
25 00 08 a8 40 5b e0 08 01:22:37.700 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4033 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.[list]
See alot of problems with the hex codes, can someone help? Trash or good?