damato300x7

Nevermind, I guess this is the way it is supposed to be. After doing more searching I found this: "/mnt/user is the contents of the user shares including cache"

My appdata directory is on both a user share and my cache disk. It is writing to both locations. I have my appdata share set to cache only but it still writes to both locations. I renamed the appdata on the user share to appdata.bak and restarted my array. When it came back up all my dockers were like they were just installed with a new blank appdata folder on the user share. So I deleted the new appdata folder and removed the .bak from the old appdata folder and all is good. But it looks like unraid is using the user share instead of the cache disk for appdata. How can i fix this? I am on version 6.9.2 been running unraid since 2016 and cache pool for probably 4 years now and this is the first time i really paid attention to it.

I've changed the SATA cable from the ones that come with the SATA controller to 2 brand new SATA cable that go directly to the motherboard. I've switched out the power cables between my HDD to the SSD and still the same problem. Maybe it is a power supply issue. I just ordered a new Power Supply. We will see if that fixes it.

Recently I upgraded my system. Once I upgraded I was no longer able to keep my cache drives stable. Meaning I could run the system with 1 cache drive but as soon as I added the 2nd cache drive to the pool, the first one would come back with a drive missing error and I was unable to recover it. I had to shutdown unplug cache drive and then start up and then it would show up. At first I thought my SSD were going bad since they were 3 years old. So I bought new ones. The new ones were Samsung 1TB QVO drives, same thing happened. Then I read a thread that say these are not the best drives for unraid. So I bought Samsung 1TB EVO 860 drives. Same thing happens. I even plugged the SSD's directly into the motherboard, doesn't matter. As soon as I plug the 2nd cache drive in the 1st one will go missing. I am completely at a loss at this point. Here is my hardware setup. ASRock B365M Pro4 Intel i9-9900K LSI 9240-8i I attached my system log if that would help. Thanks dms-syslog-20200625-0020.zip

I uninstalled V2 and then installed V3 but it just brings me to the login screen. Is there an initial default login? Because none of my logins are working that once worked with V2.

I have not used Ombi in some time. Since the last time I used it I can assume there have been update and I and all other users are no longer able to login. I guess it upgraded to v3. So how do I get back into Ombi? I have tried everything and every password and nothing.

2 week ago I started getting errors on 1 of parity drives and on Disk 1 of my array. I replaced the controller card with one from the list of compatible cards, that did not fix the problem. My case has a backplane for the first 2 drives, I thought that may be the issue so I removed that. That did not fix the problem. Lastly I replaced both drives and now the parity drives is good and Disk 1 is still coming up with errors. This is a brand new drive now. I just ordered new cables to rule that out. I will attach my diagnostics to see if anyone can see an issue with anything. Thanks dms-diagnostics-20180130-0622.zip

ok, Rebuild is in progress. Thanks for your help.

So last week I got 2 drives that failed. 1 Parity and Disk 1. I had this controller card in my system: SuperMicro AOC-SASLP-MV8. I know this card is not supported and figured that the system was not liking the card anymore. So I bought this card: LSI SAS 9207-8i. I installed it and started the system up and the 2 disks are still showing bad. Both of these drives are on the same and only backplane in my case so I thought maybe the backplane was bad so I removed the backplane from my case, started it back up and still disks are bad. I can't see anything in the diagnostics for a reason these drives are bad but I will attach a copy of the diagnostics and maybe someone can see something wrong. I am running a parity check right now, I don't know if this will possibly put the drives back to good if everything checks out on the parity check. dms-diagnostics-20180127-0706.zip

ok. Just bought a LSI SAS 9207-8i on eBay. Should be here this week. Thanks for your help

Which do you think is the most out of the box compatible with at least 8 ports?

I am getting a Call Traces error in Fix Common Problems. Here is the exact error: "Your server has issued one or more call traces. This could be caused by a Kernel Issue, Bad Memory, etc. You should post your diagnostics and ask for assistance on the unRaid forums" I have attached my diagnostics. Thanks dms-diagnostics-20180113-1011.zip

yeah I've had this card in since February and had no issue. Then I had this issue yesterday which was not the card I guess something is wrong with the motherboard sata ports. All drives are now on the card and working great again. Not saying that I won't upgrade at some point. But working good right now. Thanks for the heads up about the card.

that did it. I removed all ports off Motherboard and using the card only. I also removed 3 of the drive from the array and disconnected power from them. The Parity is being synced right now @ 126.5 MB/sec. Will finish in a little over 9 hours. Thank you so much for the help

So my server has been running for over a year now without any issue. Yesterday it started doing its monthly parity check and it was running extremely slow. Said it was going to take 62 days to complete the check and only running at 750 Kbs. In the past this check has only taken ~9 hours. When looking at the logs here are the errors I am getting during the parity check. Are one of my disk going bad or is my controller card going bad? I am using the SUPERMICRO AOC-SASLP-MV8 card for my drives. I have had 0 issues until yesterday. thanks dms-diagnostics-20180102-1323.zip

FINALLY. Thanks CHBMB that did it.

Maybe I'm just stupid. I just can not get this working correctly. Now Sab is downloading the files into the config directory it created a complete and incomplete directory there. here are some snapshots of my docker configs for Sab, Sonarr, and folders for Sab Sabnzbd Docker Config http://209.95.48.14/pics/SabnzbdConfig.jpeg Sonarr Docker Config http://209.95.48.14/pics/SonarrConfig.jpeg Sabnzbd Folder Config http://209.95.48.14/pics/SabFolders.jpeg I just have no clue what is going on. CouchPotato I got configured and working like a champ, Sonarr has bit a headache. I dont get why it is making my default base folder /config Thanks for all the help.

I am confused at the moment. I understand what you are saying that I have the paths incorrect. I have Sabnzbd setup like this: /mnt/cache/Downloads/ and Sonarr like this /mnt/cache/Download/Complete inside Sabnzbd you have to configure a Complete and Incomplete folder. So when the download is downloading it is in the Incomplete folder. Then when it is done it moves it to the Complete folder. Maybe Sabnzbd works differently than NZBget. I dont know frustrated

I can not get Sonarr to move files to my share. This is the error I get after something downloads: Import failed, path does not exist or is not accessible by Sonarr: /Downloads/Complete/TV/Emerald.City.S01E01.720p.HDTV.x264-AVS Sonarr Docker Setup Host Port 1 - 8989 Host Path 2 - /dev/rtc Host Path 3 - /mnt/user/Media/TV/ Host Path 4 - /mnt/cache/Downloads/Complete/TV/ Appdata Config Path - /mnt/cache/appdata/Sonarr/ Sabnzbd Docker Setup Host Port - 8080 Host Path - /mnt/cache/Downloads/ Appdata Config Path - /mnt/cache/appdata/sabnzbd/ When the file is completed it move the file from Incomplete to Complete/TV but goes no further. Then the log gives me that error. Thanks

So I setup my unRaid server using just a standard desktop motherboard Motherboard: Gigabyte Technology Co., Ltd. - H81M-HD3 CPU: Intel® Core™ i5-4440 CPU @ 3.10GHz Memory: 8gb Well now I'm thinking about upgrading to a server grade motherboard with xeon processors and ECC memory. I have already purchased the server software. If I change to a new server can i just move that USB drive over to the new server or do I have to start over with a new USB drive and purchase another license? Sorry if this has been asked before. Thanks