gavin_UK

The thing I like most is the community to help me learn this great OS I would like to see Multiple array’s

thanks for all your help i just have to now go step by step and hope for the best if you guys dont mind me reporting back at each stage lol

so what would be the best way after ive done a parity rebuild onto the 1st parity disk should i then replace my disk 1 and rebuild that and as for disk 7 should i Stop the array unassign the drive start the array to commit the current assignments (and ‘forget’ the drive just unassigned) Stop the array assign the drive start the array to rebuild the drive can i just say thank you guys for all your help with this im just panicking about losing my data as i was in the process of upload my most important files to the cloud

i know that sorry if that sounds like im being sarcastic i was just asking what would be the best order to do things in

wouldn't it just be replaced from a parity sync ?

ok its doing a parity sync on to the 1st parity dive only 26 hours togo disk 7 was able to stay as it was would you say after that i should replace my disk one with the new RMA'ed one and the do a parity sync to just that or format disk 7 and replace disk one and do both at the same time

would it not effect disk 7

This is what im worried about when i get the replacement disk for disk 1 and go to start the array its going to say do a parity sync to copy data back over to the new disk would it also force Disk 7 (discarding all data currently on those disks) to format as thats what i keep getting on the Array Operation panel ive only got one parity drive working with a 2nd faild hdd being emulated with a 3rd hdd Unmountable: Unsupported partition layout it dont say it's disabled or being emulated does that just mean the files are not being seen

disk one is being emulated i guess from the 2nd parity disk the drive was dead its been taking out sent back for a RMA which i should be getting today should i replace this before i try To re-enable the 1st parity disk (Using the same disk) do the following: Stop the array unassign the drive start the array to commit the current assignments (and ‘forget’ the drive just unassigned) Stop the array assign the drive start the array to rebuild the drive (either parity or data as appropriate).

how do i enable my parity disk ?

the model of the drive which is a RMAed is to replace disk 1 which is a 6TB WD Red pro ive done the Rerun without the -n this is the log Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - agno = 8 - agno = 9 - agno = 10 - agno = 11 - agno = 12 - agno = 13 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 0 - agno = 4 - agno = 6 - agno = 1 - agno = 3 - agno = 5 - agno = 7 - agno = 8 - agno = 9 - agno = 2 - agno = 10 - agno = 11 - agno = 12 - agno = 13 Phase 5 - rebuild AG headers and trees... - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... done done a restart of the array and disk 7 is Unmountable: Unsupported partition layout also as i have 2 parity drives ok parity 1 is disabled for some reason im sure that was from crc errors parity2 i hope is standing in for disk 1 which im waiting for my RMA today at some point what is the best thing to day about disk 7 ? as it looks like ive only got 1 parity drive running

thanks for your reply this is the log Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan (but don't clear) agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - agno = 8 - agno = 9 - agno = 10 - agno = 11 - agno = 12 - agno = 13 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 0 - agno = 1 - agno = 2 - agno = 4 - agno = 3 - agno = 5 - agno = 9 - agno = 6 - agno = 8 - agno = 7 - agno = 11 - agno = 10 - agno = 12 - agno = 13 No modify flag set, skipping phase 5 Phase 6 - check inode connectivity... - traversing filesystem ... - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify link counts... No modify flag set, skipping filesystem flush and exiting.

sorry i gave you the wrong diagnostic i had the hdd out of the bay this is the correct oneabyss-diagnostics-20190916-2339.zip

abyss-diagnostics-20190916-2308.zip thanks

abyss-syslog-20190916-2222.zip

ok how to start i have a array of 20 hdd's with 2 parity about 3 days ago i had a HDD go bad thats ok im waiting on the RMA which should becoming tomorrow so disk 1 was being emulated and today i come home and found the server off when i rebooted i have my 2nd parity drive disabled and another disk from the array was saying xfs Unmountable: Unsupported partition layout

any idea what can cause that

im on 6.7 and for some reason my disk 7 a 10TB ironwolf is disabled but it's passed the SMART test ive added the server diagnostics and the smart test what i have noticed is all of my iron wolf drives have a crazy Raw read error rate error disk 7 is 83566722 abyss-diagnostics-20190518-1539.zip abyss-smart-20190518-1621.zip

thats is ? can i copy it over when its running then edit it

How can i move my PLEX Docker from a Unassigned Device SSD into the normal location as my Cache drive is bigger

thanks guys

done abyss-smart-20190221-2232.zip is this drive ok to use

can the test take some time as its been on self-test in progress 10% complete for sometime now

any idea what drive that is

abyss-diagnostics-20190220-2359.zip please ignore Disk 5 im waiting on a replacment 10 TB