Sweex

Sab in general is quite quick for me, with unpack and such. I've made new wireguard config files and tried copy the one from Deluge that, in Deluge, goes fast. But to no avail, Sab+Wireguard is still <1MB/s.

Hi! I've been having some problems with PIA and Wireguard recently. Sab works fine with Openvpn, full speed (40MB/s), PIA client on macbook on the same network with Wireguard full speed, Deluge with PIA wireguard full speed. But if i change to Wireguard on Sab, my speed is 1MB/s max. Same endpoint on pia, NL. I've deleted the docker (and appdata folder) and reinstalled and configured it, same problem. What do you need from me and what more can i try? Best regards Sweex

Hi! Since some time ago i've had problems with wireguard and SAB. I only get speeds of <1MB/s, where i get >50MB/s with OpenVpn. Im using PIA as the VPN provider and has been for many years. I'm connecting to the same servers with both protocols. The even more wired thing is that Deluge is having no problems with Wireguard, i get mostly full speed there, if the seed is good enough. This is running on the same physical machine under UnRaid in dockers. Both containers are under the same network interface (brigde) and the configs are exactly the same, apart from Deluge having Privoxy active. I deleted both Sab and Deluge and removed the old folders and did a complete re-install and the problem is still present. What logs and info is needed? Best regards Sweex

Same here. Getting texts from family "hey your netflix is down" 😂. Hope it's resolved soon.

Thanks! the Script works. this saved me a lot of time..

Oh ok. As what file type? And where on the flash should i put it, just root?

First i must install the plug-in right? And i can't seam to find the .plg file? Is it somewhere on github? Im quite new to all this..

Tanks a bunch! where would i enter this command? In the terminal on the wed gui? Oh, thanks. The explains a few things. I'll try the script from above first before ill do the more manual option.

Hi! Im doing the spring cleaning of my server and noticed that when i set up my movie and tv-show shares the split lvl was set to auto. I wanna fix this to avoid unnecessary spin up of disks to get subs or something. I read that if i change split lvl on a share that has data unraid won't move the old data, it only applies to new data. So i made i new share called tv-shows-2 and set split lvl 2 (allowed to split tv-shows but not seasons right?). I then went into krusader (docker) and navigated through user shares and moved everything from tv-shows to tv-shows-2 but everything stayed on the same disks? I thought it would organize it self because the new share had a different split level? How do i most easily clean up my media? And how im a sure that new media being written to the shares by sonarr/radarr honors the split level? Best Regards Sweex

I did a hard reset and its now back up and running. Parity check started. Everything seams normal, even deluge continued its downloads without a hickup. I've turned on troubleshooting in fix common problems. I've also moved the server to the living room so i can plug it in to the tv if it freezes again. Problem is I'm leaving to go snowbording for the holidays tomorrow. So its the worse moment forn this to happen

Okay! From another forum someone said i could plug in a keyboard and write init 6 to force a reboot, do you think that would work? What can i do to prepare for the next time? Logfiles on fix common problems, a complete list on a plugins and dockers ( i guess for you guys, help trouble shooting?), Anything more?

Quick push did nothing at all unfortunately, which i do find a bit odd.. I hava that plugin, will turn that setting on in the future! Latest as in latest stable. No, can't access files. It is like its not there at all. OpenVPN AS is also down. Fans are spinning and there is not much dust at all..

Hello!! I have unraid, latest verison, running on a Dell T20 ( xeon 1225v3, 8GB ECC Ram) with some 3TB WD red and a WD SSD. My problem is that the server is unreachable, both Web Gui and SSH. The router said it had the server as a connected device, but after a reboot of the router it no longer shows up there. It happened last week as well, and i was forced to do a dirty shutdown. Started it back up, did parity check and all, 0 errors. The server was working fine all day, doing backup from windows laptop and timemachine, downloading, serving PLEX and running OpenVPN AS. Then when I was going to watch some more plex, the server was unreachable. Before last week it had an uptime on like 250 days without a single problem. How can i do a more gentle restart if no webgui or ssh? Why is this happening and what can i do to fix it?

Tanks for your input! I've read so much good about them so this surprises me. Anyone else experiencing this? anyone getting good speeds? Im getting the same low speeds with the PIA client active on a desktop and trying torrents, so it seams to be a problem with PIA ':/ What VPN are you changing to? Best regards EDIT; I tried to open a port with the PIA client on a desktop and that did the trick i think. But how do i do that in DelugeVPN docker on Unraid?

Hello! I'm using DelugeVPN with PIA but im getting terrible speeds, sub 1Mbyte/s with multiple torrents active. I'm getting a few 100KB/s per torrent. I'm on a gigabit line and getting solid 10-15MB/s without PIA. Using the NL server with a UDP connection. What might be the problem? New to this, please tell me what more is needed from me. Best regards.