Tyranian

I resolved with reinstall of Dockers and restoring config / data, and posted in the Docker specific support as all were from one repository

Couldnt see if this has already been stated but after updating to the new Unraid RC (6.10 RC5) from stable I have got permission errors on several Binhex containers here is the error for Sonarr System.Data.SQLite.SQLiteException (0x80004005): attempt to write a read-only database updating the permissions or reinstalling the App fresh and restore of backup works (i went with the restore as wasnt sure what other files may have permission issues)

I upgraded from stable 6.9.2 and I am experiencing a lot of permission issues with Dockers is this expected? Few examples System.Data.SQLite.SQLiteException (0x80004005): attempt to write a readonly database NzbDrone.Common.Exceptions.RadarrStartupException: Radarr failed to start: AppFolder /config is not writable A reinstall of the docker and copying over of the config has worked for the one I tried

Thanks for your reply I moved all data from the drive and reformatted the disk then copied the data back and all seems good.

I have a disk that will only mount RO and has the following issue when BTRFS checked I have tried Scrubbing but errors remain what are my next options? Disk 1 has the following errors when doing a BTFRS check [1/7] checking root items [2/7] checking extents parent transid verify failed on 1591866720256 wanted 3177 found 3193 parent transid verify failed on 1591866720256 wanted 3177 found 3193 Ignoring transid failure parent transid verify failed on 2617519161344 wanted 1827879 found 1827895 parent transid verify failed on 2617519161344 wanted 1827879 found 1827895 Ignoring transid failure parent transid verify failed on 2736103292928 wanted 1828130 found 1828146 parent transid verify failed on 2736103292928 wanted 1828130 found 1828146 Ignoring transid failure backref bytes do not match extent backref, bytenr=4500955992064, ref bytes=679936, backref bytes=684032 backpointer mismatch on [4500955992064 679936] backref bytes do not match extent backref, bytenr=5663998078976, ref bytes=557056, backref bytes=561152 backpointer mismatch on [5663998078976 557056] backref bytes do not match extent backref, bytenr=5663998640128, ref bytes=565248, backref bytes=569344 backpointer mismatch on [5663998640128 565248] backref bytes do not match extent backref, bytenr=7142533070848, ref bytes=745472, backref bytes=749568 backpointer mismatch on [7142533070848 745472] backref bytes do not match extent backref, bytenr=7939927638016, ref bytes=630784, backref bytes=634880 backpointer mismatch on [7939927638016 630784] backref bytes do not match extent backref, bytenr=11081639366656, ref bytes=753664, backref bytes=757760 backpointer mismatch on [11081639366656 753664] ERROR: errors found in extent allocation tree or chunk allocation [3/7] checking free space cache there is no free space entry for 4500956672000-4500956676096 there is no free space entry for 4500956672000-4501146697728 cache appears valid but isn't 4500072955904 there is no free space entry for 5663998636032-5663998640128 there is no free space entry for 5663998636032-5664009093120 cache appears valid but isn't 5662935351296 there is no free space entry for 7142533816320-7142533820416 there is no free space entry for 7142533816320-7142551584768 cache appears valid but isn't 7141477842944 there is no free space entry for 7939928268800-7939928272896 there is no free space entry for 7939928268800-7940341760000 cache appears valid but isn't 7939268018176 there is no free space entry for 11081640120320-11081640124416 there is no free space entry for 11081640120320-11082110337024 cache appears valid but isn't 11081036595200 [4/7] checking fs roots parent transid verify failed on 1591866720256 wanted 3177 found 3193 Ignoring transid failure parent transid verify failed on 2617519161344 wanted 1827879 found 1827895 Ignoring transid failure parent transid verify failed on 2736103292928 wanted 1828130 found 1828146 Ignoring transid failure [5/7] checking only csums items (without verifying data) parent transid verify failed on 1591866720256 wanted 3177 found 3193 Ignoring transid failure there are no extents for csum range 4500956672000-4500956676096 csum exists for 4500676567040-4500973539328 but there is no extent record there are no extents for csum range 5663999205376-5663999209472 Right section didn't have a record there are no extents for csum range 5663998636032-5664008814592 csum exists for 5663968206848-5664008814592 but there is no extent record there are no extents for csum range 7142533816320-7142533820416 csum exists for 7141477842944-7142551478272 but there is no extent record there are no extents for csum range 7939928268800-7939928272896 csum exists for 7939804889088-7939934044160 but there is no extent record parent transid verify failed on 2617519161344 wanted 1827879 found 1827895 Ignoring transid failure parent transid verify failed on 2736103292928 wanted 1828130 found 1828146 Ignoring transid failure there are no extents for csum range 11081640120320-11081640124416 csum exists for 11081633353728-11081987842048 but there is no extent record ERROR: errors found in csum tree [6/7] checking root refs [7/7] checking quota groups skipped (not enabled on this FS) ERROR: transid errors in file system Opening filesystem to check... Checking filesystem on /dev/md1 UUID: 1e50bdfa-ef2a-486c-a920-873abd0d967b found 5604656373760 bytes used, error(s) found total csum bytes: 5465849760 total tree bytes: 6225084416 total fs tree bytes: 361398272 total extent tree bytes: 88276992 btree space waste bytes: 300423581 file data blocks allocated: 5605679144960 referenced 5598424096768 Thanks

Hi, is it possible to use openvpn on port 443 alongside Nginx (linuxserver : letsencrypt docker) I ideally want to keep all traffic on port 443 as I travel a lot and certain hotels block non standard http /https ports.

I do use what they call SimpLink on my LG TV as it allows me to control the amp via the same remote and auto turn it on etc I will check if I can turn it off for a HDMI input only. Thanks for the idea!

no issues passing through GPU or sound use both from the graphics card, the only thing I do have is on TV I have to remove HDMI cable and reinsert it when I restart the VM dont have this issue with my monitor though.... I was messing around with both emulated and host passthrough CPU and can't remember why I left on emulated I'm guessing because it either gave better performance or I tested it last that way... I will try again with host passthrough when I get a chance.

just tested and works so much better now! thanks for applying the patch so quickly. quick tests show very close performance to the NPT off results in my first post

ah awesome! really pays to read up on the forums more often

Hi, I have not been online for a while so apologies for not responding sooner. I actually just use NPT now that removes micro stuttering and kodi works perfectly, I won't get the same gaming performance, but I don't actually need too in this build it as it's for media pc / dockers / storage. I have no stutters at all on video playback what are you wanting to use your VM for Swiguy? Also think there is some good news on the whole subject here... https://www.phoronix.com/scan.php?page=news_item&px=AMD-NPT-GPU-Pass-Through this is what the suggested fix is I believe By just changing the line in `init_vmcb` that reads: >>> >>> save->g_pat = svm->vcpu.arch.pat; >>> >>> To: >>> >>> save->g_pat = 0x0606060606060606;

Then if it helps I'm stable in general other then the VM at the moment which has just started crashing after a day or so of usage now I've finished setting it up, I have C-state enabled and my suffers no other types of crashes then the VM one. I'm using Ryzen 1600 & Gigabyte Gaming 5 Mobo with F8 bios. There is now a AGESA 1.0.0.6b bios so may try that next.

When not using C state what error do you see? does the VM crash and then you cannot restart the VM due to a PCI error until rebooting unraid? if so that may be the issue I have just started to see on my VM when leaving on overnight.. Im already on rc8q and latest bios for my Aorus Gaming5.

Heres my current XML as requested i have lowered the core count recently is the only change from the benchmark results above <domain type='kvm'> <name>WindowsMedia</name> <uuid>452eed65-1dfc-9329-7212-62bde7d85385</uuid> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>8388608</memory> <currentMemory unit='KiB'>8388608</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>8</vcpu> <cputune> <vcpupin vcpu='0' cpuset='4'/> <vcpupin vcpu='1' cpuset='5'/> <vcpupin vcpu='2' cpuset='6'/> <vcpupin vcpu='3' cpuset='7'/> <vcpupin vcpu='4' cpuset='8'/> <vcpupin vcpu='5' cpuset='9'/> <vcpupin vcpu='6' cpuset='10'/> <vcpupin vcpu='7' cpuset='11'/> </cputune> <os> <type arch='x86_64' machine='pc-i440fx-2.9'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/452eed65-1dfc-9329-7212-62bde7d85385_VARS-pure-efi.fd</nvram> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='none'/> </hyperv> </features> <cpu mode='host-passthrough' check='none'> <topology sockets='1' cores='8' threads='1'/> <feature policy='disable' name='smep'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/isos/spaces_win_clover.img'/> <target dev='hdc' bus='sata'/> <boot order='1'/> <address type='drive' controller='0' bus='0' target='0' unit='2'/> </disk> <controller type='usb' index='0' model='nec-xhci'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> </controller> <controller type='pci' index='0' model='pci-root'/> <controller type='sata' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:a4:6d:f2'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x0a' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x0a' slot='0x00' function='0x1'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x046d'/> <product id='0xc52b'/> </source> <address type='usb' bus='0' port='1'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x046d'/> <product id='0xc531'/> </source> <address type='usb' bus='0' port='2'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x0b05'/> <product id='0x17cb'/> </source> <address type='usb' bus='0' port='3'/> </hostdev> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> </memballoon> </devices> </domain>

Check your card has a uefi supported bios on the 760's not all did that could the cause of your issue. https://www.techpowerup.com/vgabios/ <---- check here

I did try last night to use the OVMF and was able to create a machine and once started see the NVMe in the bios options and set it to be the boot device but unfortunately, it hung on boot and I couldn't get windows to start again, I have a horrible feeling I might have to rebuild the VM from scratch or backup create a new VM and restore onto it.. but lack the time atm to give that a go.

Ok so progress so far is positive but its still not perfect, I now have fast responsive machine most of the time with the above benchmarks but it still suffers occasionally from micro stutter I am hoping to try and resolve\reduce this with CPU isolation and dedicating the cpu's to the VM but currently have an issue with my bootloader causing the VM not to load when cpu's are isolated. My settings are as follows Bios CPU is clocked to a fixed 3.6 ghz as dynamic boost doesn't seem to work currently Boot append kvm-amd.npt=0 kvm-amd.nested=0 kvm.ignore_msrs=1 initrd=/bzroot VM NVME & 970 GTX passed through - all cores passed through for testing (will reduce to 6-8) 8Gb memory <cpu mode='host-passthrough' check='none'> ..... <feature policy='disable' name='smep'/> </cpu> I can provide the VM XML if that helps anyone.

I noticed as I only tried to isolate the CPU's after I had already built the machine and as soon as I started it I got the error once I removed the isolation I could boot into windows again,

if you want quiet palit do a passively cooled 1050ti cant get any quieter than that! http://www.guru3d.com/articles_pages/palit_geforce_gtx_1050_ti_kalmx_review,1.html I have no first-hand experience of the card just saw it when looking for options for my htpc.

Hi, Firstly thanks for the great guides they have been a real help getting to grips with unRaid. I followed your guide and got my Nvme passed through no issues with the clover boot images but every time I isolate CPU's and try to launch the VM it refuses to boot and hangs on the cursor in the top left corner I assume this is the clover boot loader, is there a way to move from the clover boot loader to the method of booting from a passed through nvme drive described above with the newer ovmf? Thanks

Hi, I would say honestly the 1050ti will be the issue in getting 1080p 60fps on a lot of games looking at benchmarks for the 1050ti tomb raider etc hits around 40 fps on bare metal yes some games will run 60 fps but I would suggest 1060's if you can stretch to them instead. This review has both 1060 and a 1050ti gaming model in the benchmarks http://www.guru3d.com/articles_pages/gigabyte_geforce_gtx_1050_ti_g1_gaming_oc_review,12.html Cpu wise I don't think you would have a problem with that, but others with similar CPU's will be better able to comment as I have not tested one.

With NPT on with the 970 GTX CPU performance went through the floor (around 2000) but GPU performance was good (still above 12000) in Firestrike however, the cinebench CPU results are still over 900. With NPT off the majority of benchmarks work well however, Kodi stutters occasionally on 4k video playback and the system seems a little unresponsive at times in general use, with NPT on this is not an issue and playback was flawless and general usage feels snappy but the benchmarks tank... Another thing of note is SMT doesn't not seem to be supported in the VM. I have found a bug has already been logged here that may be related https://bugs.launchpad.net/qemu/+bug/1703506 My experience with the AMD Radeon 280x was a little different . (will update more with more time)

Ok so new to unRaid but really wanted to give it a go for an all in one media solution... I read of all the Ryzen issues but still couldn't stop myself from investing in Ryzen even though i knew it was going to be a headache! but so far made some good progress using a lot of guides and forums in this community and others and thought I would give back a little as information and benchmarks on this stuff is still pretty sparse (unless I just don't know where to look ) Also if any of you more experienced guys and gals have any recommendations on changes\ what else I should be doing please let me know! Ok so current build is Case: NZXT H440 CPU: AMD Ryzen 5 1600 @ 3.6 Motherboard: Gigabyte Gaming 5 x370 BIOS Version F7 RAM: Ripjaws IV 16GB 3000 (4x8GB) DDR4 @2933 XMP profile GPU: Radeon HD 6450 GPU 2: Gigabyte Windforce GTX 970 / Sapphire VaporX 280X HDD's 3xHGST 8TB, 4xWD Red 3tb, 1x 120GB SSD cache SSD: Samsung 960 EVO NVMe M.2 250GB PSU: Corsair RM850x OS: Unraid 6.4.0-rc7a VM OS: Windows 10 home x64 current progress is actually pretty positive here are the benchmarks I have achieved on with the 970 GTX passed through, NTP off, Emulated CPU, NVMe Passthrough. I have yet to complete the Bare metal benchmarks but looking at other 970 benches out there these don't seem far out. Cinebench 15 Firestrike (normal) Timespy Shadow of Mordor (1920x1080 Ultra settings) Crystal Disk Mark

Thanks for the replies, Your responses seem to confirm I should be able to do everything I want and sounds like BJP is already using a VM with passthrough that's capable of 4k media but with a few driver snags. I've spec'd up 2 builds so far 1 Ryzen because I think the additional cores would be great for VM use but nervous of going down this route as it seems people have struggled with passthrough on Ryzen https://uk.pcpartpicker.com/user/tyranian/saved/Dhh4D3 My other build is based on Kaby Lake but is using the IGP for graphics will this be an issue for passtrough \ 4k playback? https://uk.pcpartpicker.com/user/tyranian/saved/sYc3CJ To answer some of the questions directly Will you be doing any Plex transcoding? - yes but only for mobile devices, I use this for streaming when away from home. you need an "enthusiast" level of interest - happy to tinker to get things working and already knowledgeable in virtualization from the use of VMware and HyperV, but do need things especially the shared storage to be stable once it's done. Case wise I was tempted by the NZXT H440 (windowless) case as it can take up to 11 3.5" drives for growth and I can comfortably sit it behind my TV, though after your advice I think the Fractal Design Define R5 is more tempting as I am sure I can repurpose the 5.25" bays and get 11 drives in that too (if I ever need too) and it looks to have drive swap friendly bays while not swap they look like it should be easy to change and save me a few £ on going all out hot swap . The Define XL is also a tempting option. The other option I have is repurpose my Lian Li TYR-X2000 which has 6 hot swap bays and add in another 3 bay hot swap the 5.25" bays but its a big ass beast of a case to sit near the TV....

Hi, Been looking into unRaid for the last few weeks on and off as a possible solution to consolidate 3 machines into 1! I currently have the following requirements and would love some advice from some seasoned users on what's the best way to address them Would like to run a Windows 10 VM with graphics passthrough for Kodi, basic kids games, web browsing, 4k streaming/playback, etc. run docker apps such as Sonarr, Radarr, Sabnzdb, Plex, LetsEncrypt, etc. Consolidate my storage from a NAS and micro server with mixed disk sizes (total of 8 HDD's). If possible utilise some spare hardware I have lying around - G Skill Ripjaws 4 DDR4-3000 16GB, Corsair - RMx 750W PSU Any case must be living room friendly! Any help\advice at all is appreciated!