bdee1

Oops sorry. I actually meant to do that. Not sure what happenif d. I will re-post there. with that said, where can I find the docket run command and diagnostics?

Hi, I have been using the nzbget app from linuxserver/nzbget for a while now. recently it just stopped working. When i go to the Web UI for it, it prompts me for my login and after logging in successfully, it just comes up with a page saying "Error: 404 Not Found". any suggestions on how to troubleshoot this and get it to load again would be appreciated.

ok so problem solved. first I set the erro DHCP to manual and was able to specify the subnet and IP lease range. Then I plugged my mac and the unraid server into the old router just so I coudl access it. Then i set the unraid server to DHCP. Then when i plugged the unraid server back into the eero it showed up in the eero device list and I was able to select and create a DHCP ip reservation for it. thanks all for your guidance.

Since I am unable to connect to it at the moment, how would I go about changing the IP address on unbraid?

I believe I had it set with a static up address. Eero does Do dhcp. Its lan facing up is 192.168.7.1 the dhcp settings for eero are set to automatic. So I’m not really sure what range it passes out. Not really sure to find out unless I set it to manual. I will I’ll post the diagnostics shortly. Thanks for your assistance!!

Hi, I just changed out my router for an eero system (2nd gen). I have the free port on the eero plugged into a 4 port switch. my unraid server is plugged into one of the free ports on the switch. before i switched my router, the unraid server was set up on 192.168.1.2. Now that I have it hooked to the eero, I am not able to access it 192.168.1.2. whats weird is that when I go into the eero app and look at the list of connected devices, I do nto see the unraid server in the list. it shoudl be easy to spot because it is one of the few wired devices. anyone have any ideas on how to get my unraid server to connect again using the eero router?

thanks for the quick response. whats weird is that the username and password in the conf file is the username and password i was entering. and now that it has rejected my password a few times, when i try to go to the webui it just takes me to a page that says Error: 404 Not Found

I have been running nzbget from linuxserver/nzbget for a while. today i went to open the webui and when it prompts me for my username and password, it wont accept it. I have not changed my username or password so I am not sure what happened. How can I change my username or password, or reset it to default without having access to the webui?

this is weird. I created the new AFP share and my time machine backup seemed to run smoothly for a couple weeks and now every day i am getting the popup in osx saying that it could not complete the backup. it asks me to start a new backup, and when I do it says it cant connect to the new share. has anyone else had this happen? is anyone successfully runnign time machine backups to their unraid server?

ok so I wound up creating a brand new AFP share with the same settings but a different name, and that seemed to work. Now I need to find an easy way to empty out the old share so I can delete it.

I have created an AFP share on my unraid server (v6.3.5) which I have used in the past for Time Machine on my OSX machine (OSX Sierra 10.12.6). Recently I started gettign alerts that Time Machine is unable to connect to the share. I went into time machine settings on my mac and no matter what I do I cant seem to get it to connect to my AFP share. Nothing has changed with my AFP share on unraid. IT includes 5 disks and there is an unraid user which has read/write access. How can I go about troubleshooting this?

I am currently a crashplan user and I just read that they will be phasing out their personal backup plans. So now I am lookign for suggestions for another cloud service that allows me to backup network drives so that I can backup data from my unraid shares.

Well crap. Anyone know where I can get one of the approved types of memory from that list at a reasonable price?

I wound up purchasing the following memory from ebay http://www.ebay.com/itm/401280049561 it was Samsung 4GB (2x2GB) DDR3 1333 PC3 10600 1Rx8 Desktop RAM 497157-B88 After I replaced my existing RAM with these two sticks and powered up, it wouldn't boot. It just kept beeping and would not POST. did I get the wrong memory??

Sure, I'd be happy to supply an info you need. To answer your questions: i currently have 12 drives plus parity my case has 15 drive bays in it. I can't imagine I would ever want to use more drives than that. I don't know for sure how may controller cards are in there until I get home and can peek in the case.

I would not be repurposing any of my existing ddr since I only have two 1gb sticks. i am not as good as I used to be with hardware stuff and I want to make sure that whatever I get would be compatible with unsaid. Would you mind suggesting a specific motherboard/CPU/ram combo for me? Like brand, model etc.... i really appreciate you guys taking the time t assist here!

Yea that's a great point. It would definitely be nice to have some room for growth in the future.

Mr-hexen thanks for taking the time to look for those. That may end up being the Amy I go... fireball3, I a definitely intrigued by that option as well... any recommendations for motherboard and ram t go with that? Want to make sure I understand all my options. Before pulling the trigger.

Hmm that's interesting. Would love to get off that cheaply. I currently have 2gb of ram and my server keeps crashing because of out of memory issues. my thought was that I would like to get up to at least 8 gb, as it seem like I could get by with 4gb but would like like to have a little bit of future proofing....

I believe my motherboard will only take up to 4gb of ram so I was hoping to update the motherboard too and get a decent amount of ram along with the CPU upgrade.

Sounds good! Can anyone give me some specific mobo/CPU/memory recommendations? am i correct in assuming that Is all I would really need? I could reuse the rest of my existing hardware?

One stream at a time is ok. Two would be ideal though. And yes yes some of my media requires transcoding.

To give you some context. I am using it as a NAS and I am running the following dockers: plex couchpotato sonarr nzbget Deluge

So I have an original lime tech md-1520 which I am co side ring updating since it's obviously pretty old now. It is actually this one: any recommendations for a new mobo/CPU/ram? I should be able to reuse everything else right?

Apparently is is a C2SEE. I just looked and it definitely only has 2 slots.