jang430

I am using both sabnzbd and deluge. All those downloaded by sabnzbd are also moved to /data/complete/tv, by category. Sonarr's drone factory is set to watch this folder. deluge downloads are set to move to this folder too when completed. There are some deluge downloads that complete, and move to this folder properly. I feel there are others that is partially downloaded, but the file is shown as complete, and moved to /data/complete/tv folder, which in turn is moved by drone factory to /media (being watched by Kodi).

Hello CHBMB, it's supposed to move from /data/deluge to /data/complete/tv only when it completes downloading. After which, drone factory moves it to /media, the final destination. My kodi has /media mounted as the source for TV. The thing is, when it appears at kodi, it's playback of some files are oftentimes garbled. When I go and look for the physical file in /media array, it isn't playable too. This leads me to think that the file was transferred to /data/complete/tv even before it was completed. Don't know why this happens. Also there are several files that pause just when it started, or halfway. Upon restart, it will once again start downloading. I think it has something to do with this behavior and some files are considered complete even before they are downloaded full. These are then moved to /data/complete/tv

These are my mapping on sonarr. Hope this helps.

My preference in deluge is: In docker Deluge /data= /mnt/cache/.downloads/ In Deluge docker app Download folders: Download to: /data/deluge aka /mnt/cache/.downloads/deluge (docker mount point) I previously set move completed to: /data/complete/tv before I found out about labels. I have since then unticked the check box, but /data/complete/tv is still greyed out, but is present. Does this even happen? How do I remove it so as to be sure it's not happening? I have ratio set to 1.5, to stop. Deluge doesn't seem to have stop, but have paused? And Pause happens when it's successfully shared the ratio? But I see torrents in /data/complete/tv, and yet, they can't be played. I assume it's download wrongly? A lot of torrents not Labels: tv goes to /data/complete/tv Sonarr's drone factory is set to /data/complete/tv Sonarr's final media location is /media or /mnt/user/Media/TV/ Hope this helps others understand, so can provide help. Thanks

Anyone?

Hello, I have Sonarr, and Deluge. Sonarr looks for torrents, and passes it to Deluge. I have Deluge download it to a temp folder, eg. /data/deluge. I also have Sonarr categorize it as tv, therefore, when it goes to Deluge, it's labeled as tv. I have tv moved to /data/complete/tv. Whenever My Sonarr's drone factory is set to this folder, /data/complete/tv. I also have Deluge set to upload a ratio of 1.5. Whenever I go out and return, I'd always see some files being shown as 100%, Paused, or sometimes, error. When I go to /data/complete/tv folder, the file can't be played. When I restart the docker container, oftentimes, it will download all over again. My understanding is once's it's completed, it's moved over to /data/complete/tv, therefore, the file is perfectly playable. Oftentimes, it isn't. My suspicion is it didn't completely download. Although some files are working. What about those errors? I would run a force recheck, then it will start download again, then give an error once again after a while. Upon restart of docker container, those error files, or sometimes 100% Paused torrents will download all over again. Hope someone can explain this strange behavior. Thanks

I have question regarding binhex's deluge docker app. But I feel this is a generic deluge issue. Want to ask persons using deluge what they are experiencing. I have mine configured to download to "/mnt/cache/.downloads/" folder. I then have labels tv, movie. I then configured label "tv" to move completed to /mnt/cache/.downloads/complete/tv, then movies folder for the label "movies." My seeding is very slow. I don't actually see seeding ending quickly. On several occassions, I see an error on the torrent, and upon checking, it shows that the file is not present in the said folder, hence an error. Upon stopping the docker app, then restarting it, it will redownload all over again. But at the same time, even those that says "seeding" will also redownload. Why is this happening? Oftentimes, when I hit resume after a pause, it also just shows download, without any activity. While the same torrent works well on utorrent at the desktop. Anybody have this experience as well?

sorry archedraft. I'm already on Unraid 6.0.0, using binhex's deluge and couchpotato docker apps.

This is the error found. ERROR [o.core.downloaders.deluge] Failed to add torrent file Teenage Mutant Ninja Turtles (2014) BRRip 1080p.cp(tt1291150).torrent: DelugeRPCError: Exception: Unknown Label Traceback (most recent call last): File "/opt/couchpotato/couchpotato/core/downloaders/deluge.py", line 258, in add_torrent_file self.client.label.set_torrent(torrent_id, options['label']).get() File "/opt/couchpotato/libs/synchronousdeluge/protocol.py", line 37, in get raise self._exception DelugeRPCError: DelugeRPCError: Exception: Unknown Label Therefore, there is no label put on Deluge if movies are added by CP. Even though, at CP, it's specifically stated to mark as "Movies" label

Wow denizen! It worked. Thanks!!!

Hey denizen, I haven't yet. Thanks for the tip. I will try later and report back.

JimPhreak, I am experiencing the same issues as you. CP not "seeing" deluge. My main purpose is to use cp to grab torrents and pass it to deluge. I'm not using delugevpn. unraid ip (192.168.1.103):8112, :58846 all don't work. Do share when you've found a solution for this. Thanks

I believe as jimphreak has earlier mentioned, changing to 58846 doesn't work either

My other settings

mr-hexen, I'm experiencing what JimPhreak is experiencing. Exactly the same. Please see my screenshot.

Hello mr-hexen, I pointed to cp to 192.168.1.103:58846 or 192.168.1.103:8112 (deluge) both won't work. 192.168.1.103 is my unraid. Any ideas? I want cp to grab some torrents to pass to deluge. When I connect to deluge, I am asked for password, to which I just click ok (didn't assign any password). Is any username needed in cp? CP communicates with the daemon directly. Point CP to port 58846 instead.

Sophos gives it's utm for free for home users. I am currently using unraid 6. VM function works beautifully. As of the moment, I have a separate box that acts as my sophos utm. I can easily setup sophos utm as a vm. If it resides in unraid, can it possibly act as a gateway? Meaning, internet connections are being configured there. Can unraid act as if it's behind the sophos utm?

Hi danioj, Thank you for sharing. I am using osx, with rdp on my windows machine, and I do exactly use swipe left, swipe right to move from 1 desktop to the other. It's so convenient on a mac. I didn't know that rdp from Microsoft can work with other OS. Now I know. . Thanks. But at the same time, I use another pc desktop. That is where I need my vnc. I prefer using clients than browser since I feel anything client based is faster. But you may be right about the variant. I will try using turbo vnc and see how it goes.

I'm having problem connecting my couchpotato to deluge via 192.168.1.103:8112. This IP/Port is accessible through browser. It says test failed, see logs. A searched of just cleared logs before test doesn't show any 8112 port. Any ideas?

Thanks itimpi, will give this a try.

Had issues connecting to SabNZBd from sonarr before until guys here helped me. They pointed out that use ip of sabnzbd, and not localhost. They also pointed out using the host port, not container port. Did you change your host port? Or used default?

Thanks for the explanation itimpi

I use a cache drive. My cache is single drive only. My Media share is shown as unprotected. Could it be because my cache drive is part of my Media share, and cache drive is single?

I just installed Elementary OS on my unraid machine. Can you use Real VNC to access the vm? I tried xxx.xxx.x.x:5700 (the IP Address of the server, plus the port that I see when I use VNC remote. I just feel that using a client might be smoother than using a browser. But, I cannot connect to it using the method above. Any ideas?

Thanks. I enabled NTP server. It didn't work. I finally had to disable NTP, set the time manually, then apply. When date is correct already, I re-enabled NTP server, and got the correct time. it will get its time from the host, as in unraid, so unless that is set incorrectly then it should be ok