-
Posts
211 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by witalit
-
-
I went through the long process recently of trying to get Graylog and Elasticsearch running in dockers. I got there in the end after hours of troubleshooting but now I have noticed an issue with docker in general which causes a problem with Graylog I guess if the dockers don't restart in the right order.
Everyday around 5AM they all seem to restart not just those dockers basically all of them.. Logs don't really show much that I can understand is anyone able to advise what it could possibly be? Diags attached.
Thanks in advance!
-
On 8/31/2022 at 3:25 PM, idscomm said:
Hi folks,
Is this still the best way (up to date procedure) to install Graylog to Unraid Docker?
I did some research and found this link talking about docker compose... Just wondering the best way to install Graylog on Unraid.
Did you manage to get Graylog installed?
-
On 5/26/2023 at 5:06 AM, CraziFuzzy said:
quick update - it seems the errors I was seeing were due to folder permissions. For some reason the folders that the containers create don't get set with permissions that those same containers can access. chmod 777'ing them got the containers to all start up.. I think.. so far... now to actually learn how to USE graylog...
How has it been for you? I am struggling to setup graylog also but all the guides I follow seem to be outdated or not have any fixes for the numerous issues I see.
-
On 8/11/2021 at 11:27 AM, Squid said:
As a test, try it again with the docker service disabled.
Just had to pop in and say this saved me thank you! I stupidly deleted my libvirt then realised I have an auto backup but it wouldn't start. Thank you
-
I have also started to get this issue, I am on the latest version. I did have a stale tab open on computer so closed it now and rebooted, lets see what happens.
-
18 hours ago, Hoopster said:
I am glad that worked for you (others as well), but it is certainly not normal or expected.
Have you tried a reboot after it came up and did it take that long again? If so, your configuration should be checked as something is not right.
Yes looks like you are right, I just rebooted again and have the same issue. Samba comes up as I can access shares but not able to get to Web GUI again.
Edit: 5-10 mins wait and gui is accessible now, probably more normal right?
-
Updated to 6.9.0 with success. At first I thought it went horribly wrong as the Web Gui would not load... spent an hour troubleshooting.. got fed up left it. Come back 45 mins later and nothing was wrong, I guess there was a delay before web GUI was live.. impatient most likely.
Just in case anyone else panics, give it some time after the update to try access Web GUI.
-
Anyone have any ideas? I have had to turn my server off as the flood of messages was insane but I'm stuck where to look.
-
Yeah I never tested sorry as I started to use WatchGuard instead.
-
Last night my phone was going crazy with notifications from my server, IPMI System Firmware Progress and multiple notifications see attached screenshot. I can't seem to work out why it is suddenly just happening, I did replace the CPU but that was nearly a month back now.
Also attached diagnostics if anyone has any ideas?
Thanks
-
2 hours ago, johnnie.black said:
Same users have issues getting a DHCP address with latest release, try setting a static address.
As easy as that.. :). Working fine now after a reboot, guess I can just keep it static anyways. Thanks to Squid and Johnnie for the help here.
Has this been reported as a bug at all?
Cheers
-
-
Replaced Flash disk just in case. Boots fine after I deleted network.cfg, rebooted and it stays. IP assigned from DHCP then I turn off Bonding and it drops I can no longer contact server.
I restart Network service via IPMI, can get back on box. What I have noticed now is both my eth0 and eth1 have the same MAC Address? See below, last image is what my MAC should be for IPMI nic.
-
Ah I actually used the same flash drive, was late when I read your reply. Still think its worth me trying a new flash disk?
-
Yeah sets an IP fine. Don't tell me I have to do a new config just for a CPU swap please
-
Same again.. Damn man what's going on
-
Same issue unfortunately.
-
Getting stuck at /bzimage
Edit: OK I restarted again its moving now.. will do same process as above. I do get that stuck at bzimage every so often after reboots. Is my flash drive on the way out?
-
So I upgraded my CPU and after first boot I see my server has no IPv4 address. Looked at some old threads and deleted my network.cfg, it reboots I get an IP all fine. If I then reboot the system it once again is unable to set an IP.
I have attached my diags if anyone can assist? Never had this issue before can't see why upgrading the CPU would cause this issue, I did notice my BIOS time was 1 hour behind updated that yet issue still occurs.
Thanks
-
Great work thanks!
-
Really needed to see the diags before rebooting to help further. Sounds very bizarre though!
-
Reading these types of threads gives me chills, hope you can recover your data - Good luck. Least Johnnie is here to help 🙂
-
On 3/1/2020 at 1:12 PM, 1812 said:
MikroTik
Be prepared for a learning curve if you want to use some advanced network features or care about security. My Mikrotik router has been great but I am still learning and I haven't even scratched the surface.
-
4 minutes ago, testdasi said:
Unraid and lower power can go together fine. Gaming + low power is like trying to do an F1 race with a Fiat 500.
That's what I meant - Gaming+unraid+low power = Unlikely. My UnRaid box runs around 30w on idle so I know about lower power 🙂
My dockers restart the same time everyday (I think)
in General Support
Posted
Aha! Yes, it was that easy!
I can adjust this now, thank you. Merry Christmas 😁