SMLLR

Hello, I recently updated from 6.11.5 to 6.12.1 and have been experiencing some stability issues. So far the server has become unreachable twice in the last few days, leaving me to force shutdown the server. The server loses all network connectivity so, since I am running this headless, leaves me with no way to interact with the server. I plan on connecting a monitor, but I have to have one connected at power on for it to work for some reason, so I have yet to do that. I did, however, enable mirroring syslog to flash drive. Unfortunately, this did not seem to shed any light on the issue as the last entry in the syslog file prior to the reboot is a few hours prior to the issue. Though, looking at the syslog after the reboot, one thing did stand out to me a bit, but not sure if it is related: I have attached the diagnostics log that I pulled immediately after powering back on. Thanks gibson-diagnostics-20230626-1944.zip

So this may not be the correct place for this, but since this is the thread that for the coral drivers, I'd thought I would give this a shot... Anybody have an idea on what I need to do to get the dual edge TPU to even show up in the OS? I would expect to see one device listed in lspci, but I see nothing unfortunately. I have verified that the wifi e-key slot is enabled in the BIOS. Any ideas on where to go from here would be helpful. Motherboard is an AsRock H570 Steel Legend with an Intel 10700K CPU (don't mind the K, it was part of a bundle and I had it lying around). Thanks

I have an older HP G8 server that I am thinking about replacing with a newer build. The main use of the server is approximately 30 or so docker containers. The containers are mainly for home automation (Home Assistant, Nodered, etc), media (Plex, sonarr, radarr, etc), and game servers (valheim, minecraft, etc). I would like to eventually add a coral at some point, but I am still debating between PCIe, M.2 or USB. My current build is very much overkill mainly due to getting the hardware for free from work: Model: HP ml350e G8 CPU: 2x CPU E5-2440 v2 @ 1.90GHz Memory: 192GB ECC DDR3 The new build I am looking at is: Motherboard: ASRock H570 Steel Legend CPU: Intel Core i7-10700K (i have this on hand as its currently unused from a bundle purchase) Memory: 2x G.Skill Ripjaws V Series 16 GB I'm just mainly looking for any glaring issues that I would be missing and IOMMU groupings info. I don't really have plans to add a GPU for transcoding as I'm planning to use quicksync for it. I'd also consider selling the CPU and buying a newer 11th non-K cpu possibly if that would make more sense. Thanks

I have an HP ML350e G8 and have started to experience similar parity check issues that you were experiencing. I went through multiple parity check cycles with the default tunables an an HP H220 HBA without any issues, but started to see your problems once I added an additional drive and the issues are persisting even after removing the drive. I will be attempting to rebuild the server from scratch when I get a chance to rule out any configuration issues.