ibasaw

can't use or install any plugins...

hi, Since 2 days, i got an infinite loop when i try to browse the plugins page. And the apps list page is very very very slow (more than 30 seconds to display) here the log of chrome i had already restart the server, same problem Model: Custom M/B: Supermicro - X9DR3-F CPU: Intel® Xeon® CPU E5-2690 v2 @ 3.00GHz HVM: Enabled IOMMU: Enabled Cache: 640 kB, 2560 kB, 25600 kB Memory: 64 GB Multi-bit ECC (max. installable capacity 192 GB) Network: bond0: fault-tolerance (active-backup), mtu 1500 eth0: 100 Mb/s, full duplex, mtu 1500 eth1: 1000 Mb/s, full duplex, mtu 1500 Kernel: Linux 4.14.26-unRAID x86_64 OpenSSL: 1.0.2n ++ the-beast-diagnostics-20180421-0737.zip

thank you johnnie, your help was very helpfull

ok, i think i got it. got already this pdf i only plug one cable SFF-8087 to SFF-8087 from LSI to the backplane on the motherboard and it will works. If i want a better bandwith, i can plug 2 cables SFF-8087 to SFF-8087 to share bandwith and improve performance Am i right ?

i see the backplane at https://www.thomas-krenn.com/en/wiki/BPN-SAS2-846EL1_SAS_Expander_Backplane There are 24 ports SATA on it. On the back side there are 3 connectors but only 2 on the LSI So ? i don't understand where to plug the 3 connecter minis sas ?

this is BPN-SAS2-846EL1, i read the documentation to try to understand only one expander

so i need to buy 3 LSI 9210-8I (IT MODE) to plug 24 drives at the same time.

This is a refurbished server supermicro i had already got 7 SATA 3 TB from my old NAS. i want to plug in the futur 24 Drives later if i can aford it. Need to replace my old n7700pro thecus, want to buy this one to have it for many years, this is why i oversize ram and cpu. Want to use for nas, plex + transcode, docker, handbrake conversion, apps, plugins, ... Can have other raid controller, here the list available for this server configurator: LSI 9210-8I LSI 9210-8I (IT MODE) LSI 9265-8I Adaptec 71605 i can choose only one raid controller, not indicate if i need many, i will send mail to the store to know about it. I had updated the list : added the SSD and 2 SAS 3TB disk for parity SuperMicro 846E16-R1200B W/ X9DRI-F 24 x LFF 4U SERVER Power Supply:2x PWS-1K21P-1R 1200W POWER SUPPLIES System Board:X9DRI-F Backplane:BPN-SAS2-846EL1 Processors: DUAL INTEL XEON PROCESSOR E5-2690 V2 TEN CORE 25M CACHE 3.0GHz Memory: 64GB MEMORY (8x 8GB) DDR-3 ECC REG Hard Drives(1): 480GB SSD INTEL S3500 (cache) Hard Drives(2): 3TB 7200RPM SAS (1 parity) Hard Drives(3): 3TB 7200RPM SAS (2 parity) Hard Drives(4): 1x Tray W/ Screws Hard Drives(5): 1x Tray W/ Screws Hard Drives(6): 1x Tray W/ Screws Hard Drives(7): 1x Tray W/ Screws Hard Drives(8): 1x Tray W/ Screws Hard Drives(9): 1x Tray W/ Screws Hard Drives(10): 1x Tray W/ Screws Hard Drives(11): 1x Tray W/ Screws Hard Drives(12): 1x Tray W/ Screws Hard Drives(13): 1x Tray W/ Screws Hard Drives(14): 1x Tray W/ Screws Hard Drives(15): 1x Tray W/ Screws Hard Drives(16): 1x Tray W/ Screws Hard Drives(17): 1x Tray W/ Screws Hard Drives(18): 1x Tray W/ Screws Hard Drives(19): 1x Tray W/ Screws Hard Drives(20): 1x Tray W/ Screws Hard Drives(21): 1x Tray W/ Screws Hard Drives(22): 1x Tray W/ Screws Hard Drives(23): 1x Tray W/ Screws Hard Drives(24): 1x Tray W/ Screws Raid Controller: LSI 9210-8I (IT MODE) PCIe Network Card (1): Intel Quad Port PCIe Gigabit Network Adaptor Thank you for thoses answer to this post ++

hi, Is this config server is good for UNRAID 6, is there a weak component ? Can i plug a rj45 ethernet on this Mellanox ConnectX-3 CX353A Single Port 40GbE QSFP+ Adaptor ? SuperMicro 846E16-R1200B W/ X9DRI-F 24 x LFF 4U SERVER Processors: DUAL INTEL XEON PROCESSOR E5-2667 V2 EIGHT CORE 25M CACHE 3.3GHz Memory: 64GB MEMORY (8x 8GB) DDR-3 ECC REG Hard Drives(1): 100GB SSD INTEL S3700 Hard Drives(2): 1x Tray W/ Screws Hard Drives(3): 1x Tray W/ Screws Hard Drives(4): 1x Tray W/ Screws Hard Drives(5): 1x Tray W/ Screws Hard Drives(6): 1x Tray W/ Screws Hard Drives(7): 1x Tray W/ Screws Hard Drives(8): 1x Tray W/ Screws Hard Drives(9): 1x Tray W/ Screws Hard Drives(10): 1x Tray W/ Screws Hard Drives(11): 1x Tray W/ Screws Hard Drives(12): 1x Tray W/ Screws Hard Drives(13): 1x Tray W/ Screws Hard Drives(14): 1x Tray W/ Screws Hard Drives(15): 1x Tray W/ Screws Hard Drives(16): 1x Tray W/ Screws Hard Drives(17): 1x Tray W/ Screws Hard Drives(18): 1x Tray W/ Screws Hard Drives(19): 1x Tray W/ Screws Hard Drives(20): 1x Tray W/ Screws Hard Drives(21): 1x Tray W/ Screws Hard Drives(22): 1x Tray W/ Screws Hard Drives(23): 1x Tray W/ Screws Hard Drives(24): 1x Tray W/ Screws Raid Controller: LSI 9210-8I (IT MODE) PCIe Network Card (1): Mellanox ConnectX-3 CX353A Single Port 40GbE QSFP+ Adaptor Rails: no Thank you for your answer. bye.