Netbug

Think I got it. Seems to be running 7.1.3 now. default menu.c32 menu title Lime Technology, Inc. prompt 0 timeout 50 label unRAID OS menu default kernel /bzimage append pci=realloc=off initrd=/bzroot label unRAID OS GUI Mode kernel /bzimage append pci=realloc=off initrd=/bzroot,/bzroot-gui label unRAID OS Safe Mode (no plugins, no GUI) kernel /bzimage append initrd=/bzroot unraidsafemode label unRAID OS GUI Safe Mode (no plugins) kernel /bzimage append initrd=/bzroot,/bzroot-gui unraidsafemode label Memtest86+ kernel /memtest

ok. So like the following: default menu.c32 menu title Lime Technology, Inc. prompt 0 timeout 50 label unRAID OS menu default kernel /bzimage append initrd=/bzroot append pci=realloc=off initrd=/bzroot label unRAID OS GUI Mode kernel /bzimage append initrd=/bzroot,/bzroot-gui append pci=realloc=off initrd=/bzroot label unRAID OS Safe Mode (no plugins, no GUI) kernel /bzimage append initrd=/bzroot unraidsafemode append pci=realloc=off initrd=/bzroot label unRAID OS GUI Safe Mode (no plugins) kernel /bzimage append initrd=/bzroot,/bzroot-gui unraidsafemode label Memtest86+ kernel /memtest

Ah. Found it. This is the current: default menu.c32 menu title Lime Technology, Inc. prompt 0 timeout 50 label unRAID OS menu default kernel /bzimage append initrd=/bzroot label unRAID OS GUI Mode kernel /bzimage append initrd=/bzroot,/bzroot-gui label unRAID OS Safe Mode (no plugins, no GUI) kernel /bzimage append initrd=/bzroot unraidsafemode label unRAID OS GUI Safe Mode (no plugins) kernel /bzimage append initrd=/bzroot,/bzroot-gui unraidsafemode label Memtest86+ kernel /memtest So I should add "append pci=realloc=off initrd=/bzroot" in this section like this? label unRAID OS menu default kernel /bzimage append pci=realloc=off append initrd=/bzroot

Can't seem to access it through my Windows shares. I'll pull the USB tomorrow morning and try it.

Thank you for looking. There is a lot of information on that thread. I assume, but "try this" you mean... added the following to my /boot/syslinux/syslinux.cfg: append pci=realloc=off initrd=/bzroot If that is the case, stupid question, but where is "boot" located? Would that be on the USB drive?

Sorry. Attached new ones. tower-diagnostics-20250606-1350.zip

Attached tower-diagnostics-20250606-1123.zip

Good morning. When attempting to upgrade from 6.12.14 to 7, my array seemed to become undetectable. I have downgraded back to 6.12.14, but, because I'm a little stupid, I didn't capture a screenshot of the system when it wasn't working. I believe it may be my SATA extender that is causing the problem. I was wondering if anyone would be willing to have a quick look and see if that is what's going on and if there's a way to fix it without replacing the hardware. Thanks so much. Components list follows. Current version: 6.12.14 Case: Lian-Li PC-A77F Motherboard: ASUSTeK COMPUTER INC. X99-A II , Version Rev 1.xx Processor: Intel Core i7-6850K CPU @ 3.60GHz RAM: 32GB DDR4 SATA Extender: Supermicro AOC-SASLP-MV8 SATA Extender Hot-swap Bays: SuperMicro CSE-M35T-1B (x 2) Power Supply: CORSAIR Enthusiast Series TX750M USB (unRAID): Lexar JD Firefly 8GB Hard Drives: Parity WDC_WD80EFAX-68KNBN0_VDHBX7VD - 8 TB (sdb) Disk 1 ST8000DM004-2U9188_ZR1520JK - 8 TB (sdf) Disk 2 ST8000DM004-2U9188_ZR1685VF - 8 TB (sdd) Disk 3 ST8000DM004-2U9188_ZR161J5L - 8 TB (sde) Disk 4 WDC_WD80EFAX-68KNBN0_VDH2MGVD - 8 TB (sdh) Disk 5 ST4000DM005-2DP166_WGY0E53A - 4 TB (sdj) Disk 6 ST3000DM001-1CH166_W1F23145 - 3 TB (sdm) Disk 7 WDC_WD30EZRX-00SPEB0_WD-WCC4E0NP7NLR - 3 TB (sdl) Disk 8 ST8000DM004-2CX188_ZR128XVM - 8 TB (sdk) Disk 9 ST8000DM004-2U9188_ZR15M67L - 8 TB (sdg) Disk 10 ST4000DM004-2CV104_ZFN0BNMN - 4 TB (sdi) Disk 11 ST8000DM004-2CX188_ZCT3VH40 - 8 TB (sdc) Cache INTEL_SSDPEKNW512G8_PHNH929303YD512A - 512 GB (nvme0n1) Flash JD_FireFly - 8 GB (sda)

Resolved with these instructions: https://wiki.servarr.com/radarr/faq#i-am-getting-an-error-database-disk-image-is-malformed

UnRAID Version 6.12.10 Radarr Docker Version: 5.15.1.9463 System Specs: Case: Lian Li PC-A77FB Motherboard: Asus X99-A II ATX LGA2011-3 Motherboard Processor: Intel® Core™ i7-6850K RAM: G.Skill Ripjaws V Series 32GB (4 x 8GB) DDR4-3200 Memory Drive Cage(s): 3x Supermicro CSE-M35T-1B Hot Swap Bay SATA Extender: Supermicro AOC-SASLP-MV8 SATA Extender Cache Drive: Intel® SSD 660p 512GB M.2 Boot Device: Flash JD_FireFly - 8 GB (sda) Parity WDC_WD80EFAX-68KNBN0_VDHBX7VD - 8 TB (sdb) Disk 1 ST8000DM004-2U9188_ZR1520JK - 8 TB (sdf) Disk 2 WDC_WD30EZRX-19D8PB0_WD-WMC4N0J7D8TT - 3 TB (sdd) Disk 3 WDC_WD20EARS-00MVWB0_WD-WCAZA9034298 - 2 TB (sde) Disk 4 WDC_WD80EFAX-68KNBN0_VDH2MGVD - 8 TB (sdh) Disk 5 ST4000DM005-2DP166_WGY0E53A - 4 TB (sdk) Disk 6 ST3000DM001-1CH166_W1F23145 - 3 TB (sdm) Disk 7 WDC_WD30EZRX-00SPEB0_WD-WCC4E0NP7NLR - 3 TB (sdl) Disk 8 ST8000DM004-2CX188_ZR128XVM - 8 TB (sdk) Disk 9 ST8000DM004-2U9188_ZR15M67L - 8 TB (sdg) Disk 10 ST4000DM004-2CV104_ZFN0BNMN - 4 TB (sdi) Disk 11 ST4000DM004-2CV104_ZFN1TJV6 - 4 TB (sdc) Good afternoon, I noticed this morning that downloads from Radarr were not being imported into Emby. After some digging, I noticed the following error in Radarr's log: [v5.14.0.9383] code = Corrupt (11), message = System.Data.SQLite.SQLiteException (0x800007EF): database disk image is malformed database disk image is malformed at System.Data.SQLite.SQLite3.Reset(SQLiteStatement stmt) at System.Data.SQLite.SQLite3.Step(SQLiteStatement stmt) at System.Data.SQLite.SQLiteDataReader.NextResult() at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave) at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior) at Dapper.SqlMapper.ExecuteReaderWithFlagsFallback(IDbCommand cmd, Boolean wasClosed, CommandBehavior behavior) in /_/Dapper/SqlMapper.cs:line 1142 at Dapper.SqlMapper.QueryMultipleImpl(IDbConnection cnn, CommandDefinition& command) in /_/Dapper/SqlMapper.cs:line 1125 at NzbDrone.Core.Datastore.BasicRepository`1.Insert(IDbConnection connection, IDbTransaction transaction, TModel model) in ./Radarr.Core/Datastore/BasicRepository.cs:line 188 at NzbDrone.Core.Datastore.BasicRepository`1.Insert(TModel model) in ./Radarr.Core/Datastore/BasicRepository.cs:line 151 at NzbDrone.Core.Messaging.Commands.CommandQueueManager.Push[TCommand](TCommand command, CommandPriority priority, CommandTrigger trigger) in ./Radarr.Core/Messaging/Commands/CommandQueueManager.cs:line 138 at NzbDrone.Core.Messaging.Commands.CommandQueueManager.Push(String commandName, Nullable`1 lastExecutionTime, Nullable`1 lastStartTime, CommandPriority priority, CommandTrigger trigger) in ./Radarr.Core/Messaging/Commands/CommandQueueManager.cs:line 142 at NzbDrone.Core.Jobs.Scheduler.ExecuteCommands() in ./Radarr.Core/Jobs/Scheduler.cs:line 42 at System.Threading.ExecutionContext.RunFromThreadPoolDispatchLoop(Thread threadPoolThread, ExecutionContext executionContext, ContextCallback callback, Object state) --- End of stack trace from previous location --- at System.Threading.Tasks.Task.ExecuteWithThreadLocal(Task& currentTaskSlot, Thread threadPoolThread) The above error (or some version) is repeated dozens of times in the Radarr log. After some searching the forums, this seems to be related to database corruption, but I'm not sure how to proceed to repair it. Would anyone be able to point me in the right direction? Thanks. tower-diagnostics-20241210-1309.zip

Oh FFS. I figured it out. I set up a constant ping to the unraid system and had it running in a window. Then when I went to mess around with the cables, I happened to glance up and see that I was still getting no packet loss. Long story short, somehow the DHCP reserved range on my router was wiped so two devices (unraid and a chromecast) had the same IP address. Fixed the reserved range and it seems to be working (fingers crossed).

Ordered a new USB drive. Hopefully arriving today. Will update once transferred.

Safe mode did not help. Issue persists. How does one create an unRAID stock flash drive?

I've successfully updated to 6.11.5. If booting into safe mode works, what would be the next step? Also, do you have a link to instructions on how to create an unRAID stock flash drive? Thanks.

Update: I have replaced the ethernet cable and switch. No change.