Plunky

Thank you! It should be in IT already. Unless a power outage or the likes has reverted it somehow. I checked the iDrac and It's PERC H730 Mini and says its on HBA (IT) mode. Have set the iDrac controller setting to set HBA again so it'll apply at next reboot again. So will see how it goes. I will look at reseating all then cables to it and the backplane if still an issue

Hi All, I have a feeling my server backplane is failing as new drives seem to have issues, but: Recently had to replace my UNRAID drive (USB). Since then I've been having issues. Shares will disappear from the shares tab and plex keeps having "transcoding" issues. Reboot is a temp fix. I messed around with cache to array etc which I think I have gotten wrong, so now I need your professionals help. If i stop the array and try to restart, the WEBUI just goes back to the stopped array status. and I need to reboot again I'm an amateur so please explain in simple terms if you see the problem please. unraidnas-diagnostics-20260404-1813.zip

Hi Legends, I cannot for the life of me find what's spinning up 2 of my disks, disk 2 (SDG) and Disk 8 (SDM). I tried spinning them down this morning, waiting for them to spin up again, which was around 5-10 minutes and checking the logs but I have no idea what I'm looking for (Spun down around 7:10 am 28/05 for those who know what to look for). I've checked open files from it search function, it shows nothing using Disk 2/SDG and same with 8/SDM and via browser search and only thing that pops up is "disk_load". I have searched the interwebs and apparently it's normal for at least one disk to be spun up due to certain dockers but trying to figure out why 2. Thanks in advance 🤘 unraidnas-diagnostics-20250528-0718.zip

Plex transcoding and data for sabnzbd complete and incomplete nzbs

Will do. Thank you.

Hi All, I think my unraids become a mess from me tinkering, but I don't think I broke anything that would cause this. It started with an error, something about shares. I checked the shares and sure enough, there was nothing. Rebooted and all was OK again. That was last week some time. Today Docker service just decided to stop. again, reboot and all OK. Could this be a failing USB? TIA unraidnas-diagnostics-20231016-1934.zip

Hi All, Gonnna be a long one, been trying for a few days and as always with me, noob/tinkerer here: Been playing with VM nVidia GPU Passthrough for my Win 10 VM and just can't get past the dreaded Code 43. (Lockdown boredom) I may have a unique setup as I am running a dell r510 with a homemade eGPU. Dell r510 PCIe x4 to PCIe x16 adapter, plugged into 1 of the risers x8 slots. GPU is a Gigabyte GT 610 (Also tried with a GT 710) Been through Spaceinvaderones guides mutiple times and still just can't get it work. I am currently using vBIOS ROM using SI1s GPU script to get vBIOS ROM without header. Have also tried TechPowerUp ROM with header removed via HxD, Intalled card into another Windows machine and downloaded CPUz vBIOS, with no success. Created multiple VMs with combinations of all the below: OMVF and SeaBIOS. i440fx 5.1 and Q35 5.1 Hyper-v on and off xml edited with KVM hidden state on VFIO bind "on and off" GPU IMMOU grouped and ungrouped Current XML attached. Has <feature policy='disable' name='hypervisor'/> as this was my last attempt before starting this thread. Have tried with and without this line. I have had a few attempts where driver in Device Manger was working, but after a while, Code 43 appears. Pretty sure I have gone through all UNRAID and Reddit threads on the issue and tried all the suggested fixes, just cannot get this working. Let me know if theres any other diags that need to be shared Vm XML.txt

Probably need my own post, but also in the same boat here. Went through spaceinvaderones YTs tutorials. Tried TPU edited ROM. CPUZ ROM and Spaceinvaderone vROM script. Tried a GT 610 and GT 710 card (Using their own ROMs of course). Both have code 43. Also tried al the Hyperv on/off, Seabios, OVMF, different machine type. Got a HDMI dummy plug coming just in case as well. I may be a special case as I'm using a DELL R510 and a homemade eGPU (x4 to x16 adapter as the Riser only has 3 spare x8 slots). Unraid and VM can see the cards so don't think that would be a major issue. EDIT: Dummy plug a no go, still Code 43. Will start my own thread

I removed the docker and config via CA Cleanup Appdata and reinstalled. So far so good.

I started a post over on the Emby forums if anyone else has the same issue: https://emby.media/community/index.php?/topic/61241-unraid-emby-server-issues/?p=603060

Hi All, My emby docker keeps stopping itself, other docker are running OK. Rebooted my Unraid server but still happening. Lasts between 5 minutes to 15 minutes before it stops again. I can start it up again manually but it will eventually top itself again. Thanks in advance. Emby docker Log: Info App: Entry point completed: Emby.Server.MediaEncoding.Api.ApiEntryPoint. Duration: 0.0018157 secondsInfo App: Starting entry point Emby.Notifications.NotificationsInfo App: Entry point completed: Emby.Notifications.Notifications. Duration: 0.0015533 secondsInfo App: Starting entry point MediaBrowser.XbmcMetadata.EntryPointInfo App: Entry point completed: MediaBrowser.XbmcMetadata.EntryPoint. Duration: 0.0003854 secondsInfo App: Starting entry point Emby.Security.PluginSecurityManagerInfo App: Entry point completed: Emby.Security.PluginSecurityManager. Duration: 7.24E-05 secondsInfo App: Starting entry point Emby.Server.Sync.SyncManagerEntryPointInfo HttpServer: HTTP GET http://192.168.1.12:8096/dlna/035dcf2060ab4d5aa7f13f382d418fcc/description.xml. UserAgent: SEC_HHP_[TV]UA46D7000/1.0Info LibraryMonitor: Watching directory /mnt/user/TV Shows/Ended TV ShowsInfo LibraryMonitor: Watching directory /mnt/user/TV Shows/Adults TVInfo App: Sqlite version: 3.24.0Info App: Sqlite compiler options: COMPILER=gcc-6.3.0,ENABLE_COLUMN_METADATA,ENABLE_DBSTAT_VTAB,ENABLE_FTS3,ENABLE_FTS3_PARENTHESIS,ENABLE_FTS3_TOKENIZER,ENABLE_FTS5,ENABLE_JSON1,ENABLE_PREUPDATE_HOOK,ENABLE_RTREE,ENABLE_SESSION,ENABLE_UNLOCK_NOTIFY,ENABLE_UPDATE_DELETE_LIMIT,LIKE_DOESNT_MATCH_BLOBS,MAX_SCHEMA_RETRY=25,MAX_VARIABLE_NUMBER=250000,OMIT_LOOKASIDE,SECURE_DELETE,THREADSAFE=1Info App: Default journal_mode for /config/data/sync14.db is walInfo App: PRAGMA synchronous=1Info App: Entry point completed: Emby.Server.Sync.SyncManagerEntryPoint. Duration: 0.0338314 secondsInfo App: Starting entry point Emby.Server.Sync.SyncNotificationEntryPointInfo App: Entry point completed: Emby.Server.Sync.SyncNotificationEntryPoint. Duration: 0.0047614 secondsInfo App: All entry points have startedUnhandledExceptionSystem.IO.IOException: Unable to read data from the transport connection: Connection reset by peer. ---> System.Net.Sockets.SocketException: Connection reset by peer--- End of inner exception stack trace ---at System.Net.Sockets.Socket.AwaitableSocketAsyncEventArgs.ThrowException(SocketError error)at System.Net.Sockets.Socket.AwaitableSocketAsyncEventArgs.GetResult(Int16 token)at System.Net.FixedSizeReader.ReadPacketAsync(Stream transport, AsyncProtocolRequest request)at System.Net.Security.SslState.ThrowIfExceptional()at System.Net.Security.SslState.CheckThrow(Boolean authSuccessCheck, Boolean shutdownCheck)at System.Net.Security.SslState.CheckOldKeyDecryptedData(Memory`1 buffer)at System.Net.Security.SslState.HandleQueuedCallback(Object& queuedStateRequest)at System.Net.Security.SslState.FinishHandshakeRead(Int32 newState)at System.Net.Security.SslState.FinishHandshake(Exception e, AsyncProtocolRequest asyncRequest)at System.Net.Security.SslState.RehandshakeCompleteCallback(IAsyncResult result)at System.Net.LazyAsyncResult.Complete(IntPtr userToken)at System.Net.LazyAsyncResult.ProtectedInvokeCallback(Object result, IntPtr userToken)at System.Net.AsyncProtocolRequest.CompleteUserWithError(Exception e)at System.Net.FixedSizeReader.ReadPacketAsync(Stream transport, AsyncProtocolRequest request)at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)--- End of stack trace from previous location where exception was thrown ---at System.Threading.ThreadPoolWorkQueue.Dispatch()System.IO.IOExceptionat System.Net.Sockets.Socket.AwaitableSocketAsyncEventArgs.ThrowException(SocketError error)at System.Net.Sockets.Socket.AwaitableSocketAsyncEventArgs.GetResult(Int16 token)at System.Net.FixedSizeReader.ReadPacketAsync(Stream transport, AsyncProtocolRequest request)at System.Net.Security.SslState.ThrowIfExceptional()at System.Net.Security.SslState.CheckThrow(Boolean authSuccessCheck, Boolean shutdownCheck)at System.Net.Security.SslState.CheckOldKeyDecryptedData(Memory`1 buffer)at System.Net.Security.SslState.HandleQueuedCallback(Object& queuedStateRequest)at System.Net.Security.SslState.FinishHandshakeRead(Int32 newState)at System.Net.Security.SslState.FinishHandshake(Exception e, AsyncProtocolRequest asyncRequest)at System.Net.Security.SslState.RehandshakeCompleteCallback(IAsyncResult result)at System.Net.LazyAsyncResult.Complete(IntPtr userToken)at System.Net.LazyAsyncResult.ProtectedInvokeCallback(Object result, IntPtr userToken)at System.Net.AsyncProtocolRequest.CompleteUserWithError(Exception e)at System.Net.FixedSizeReader.ReadPacketAsync(Stream transport, AsyncProtocolRequest request)at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)--- End of stack trace from previous location where exception was thrown ---at System.Threading.ThreadPoolWorkQueue.Dispatch()InnerException: System.Net.Sockets.SocketExceptionSystem.Net.Sockets.SocketException (104): Connection reset by peer[cont-finish.d] executing container finish scripts...[cont-finish.d] done.[s6-finish] syncing disks.[s6-finish] sending all processes the TERM signal.[s6-finish] sending all processes the KILL signal and exiting.[s6-init] making user provided files available at /var/run/s6/etc...exited 0.[s6-init] ensuring user provided files have correct perms...exited 0.[fix-attrs.d] applying ownership & permissions fixes...[fix-attrs.d] done.[cont-init.d] executing container initialization scripts...[cont-init.d] done.[services.d] starting services[services.d] done.Info Main: Application path: /system/EmbyServer.dllInfo Main: EmbyCommand line: /system/EmbyServer.dll -programdata /config -ffmpeg /bin/ffmpeg -ffprobe /bin/ffprobe -restartexitcode 3Operating system: Unix 4.14.49.064-Bit OS: True64-Bit Process: TrueUser Interactive: TrueProcessor count: 8Program data path: /configApplication directory: /systemInfo App: Application version: 3.5.1.0Info App: Loading assembliesInfo App: File /config/plugins/Emby.Server.CinemaMode.dll has version 1.0.2.0Info App: File /system/plugins/Emby.Server.CinemaMode.dll has version 1.0.2.0Info App: File /config/plugins/IMVDb.dll has version 1.0.1.0Info App: File /system/plugins/IMVDb.dll has version 1.0.1.0Info App: Loading Emby.Server.CinemaMode, Version=1.0.2.0, Culture=neutral, PublicKeyToken=null from /config/plugins/Emby.Server.CinemaMode.dllInfo App: Loading IMVDb, Version=1.0.1.0, Culture=neutral, PublicKeyToken=null from /config/plugins/IMVDb.dllInfo App: Loading MBBackup, Version=1.2.3.0, Culture=neutral, PublicKeyToken=null from /config/plugins/MBBackup.dllInfo App: Loading Emby.Kodi.SyncQueue, Version=2.0.3.0, Culture=neutral, PublicKeyToken=null from /config/plugins/Emby.Kodi.SyncQueue.dllInfo App: Loading AutoBoxSets, Version=1.1.3.0, Culture=neutral, PublicKeyToken=null from /config/plugins/AutoBoxSets.dllInfo App: Loading Trakt, Version=3.2.1.0, Culture=neutral, PublicKeyToken=null from /config/plugins/Trakt.dllInfo App: Loading MediaBrowser.Plugins.Trailers, Version=1.1.6.0, Culture=neutral, PublicKeyToken=null from /config/plugins/Mediabrowser.Plugins.Trailers.dllInfo App: Loading MediaBrowser.Api, Version=3.5.1.0, Culture=neutral, PublicKeyToken=nullInfo App: Loading MediaBrowser.WebDashboard, Version=3.5.1.0, Culture=neutral, PublicKeyToken=nullInfo App: Loading MediaBrowser.Model, Version=3.5.1.0, Culture=neutral, PublicKeyToken=nullInfo App: Loading MediaBrowser.Common, Version=3.5.1.0, Culture=neutral, PublicKeyToken=nullInfo App: Loading MediaBrowser.Controller, Version=3.5.1.0, Culture=neutral, PublicKeyToken=nullInfo App: Loading MediaBrowser.Providers, Version=3.5.1.0, Culture=neutral, PublicKeyToken=nullInfo App: Loading Emby.Photos, Version=3.5.1.0, Culture=neutral, PublicKeyToken=nullInfo App: Loading Emby.Server.Implementations, Version=3.5.1.0, Culture=neutral, PublicKeyToken=nullInfo App: Loading Emby.Server.MediaEncoding, Version=3.5.1.0, Culture=neutral, PublicKeyToken=nullInfo App: Loading Emby.Dlna, Version=3.5.1.0, Culture=neutral, PublicKeyToken=nullInfo App: Loading MediaBrowser.LocalMetadata, Version=3.5.1.0, Culture=neutral, PublicKeyToken=nullInfo App: Loading Emby.Notifications, Version=3.5.1.0, Culture=neutral, PublicKeyToken=nullInfo App: Loading MediaBrowser.XbmcMetadata, Version=3.5.1.0, Culture=neutral, PublicKeyToken=nullInfo App: Loading Emby.Server.Connect, Version=3.5.1.0, Culture=neutral, PublicKeyToken=nullInfo App: Loading Emby.Server.Sync, Version=3.5.1.0, Culture=neutral, PublicKeyToken=nullInfo SqliteUserRepository: Sqlite version: 3.24.0Info SqliteUserRepository: Sqlite compiler options: COMPILER=gcc-6.3.0,ENABLE_COLUMN_METADATA,ENABLE_DBSTAT_VTAB,ENABLE_FTS3,ENABLE_FTS3_PARENTHESIS,ENABLE_FTS3_TOKENIZER,ENABLE_FTS5,ENABLE_JSON1,ENABLE_PREUPDATE_HOOK,ENABLE_RTREE,ENABLE_SESSION,ENABLE_UNLOCK_NOTIFY,ENABLE_UPDATE_DELETE_LIMIT,LIKE_DOESNT_MATCH_BLOBS,MAX_SCHEMA_RETRY=25,MAX_VARIABLE_NUMBER=250000,OMIT_LOOKASIDE,SECURE_DELETE,THREADSAFE=1Info SqliteUserRepository: Default journal_mode for /config/data/users.db is walInfo SqliteUserRepository: PRAGMA synchronous=1Info AuthenticationRepository: Default journal_mode for /config/data/authentication.db is walInfo AuthenticationRepository: PRAGMA synchronous=1Info ActivityRepository: Default journal_mode for /config/data/activitylog.db is walInfo ActivityRepository: PRAGMA synchronous=1Info SqliteDisplayPreferencesRepository: Default journal_mode for /config/data/displaypreferences.db is walInfo SqliteDisplayPreferencesRepository: PRAGMA synchronous=1Info SqliteItemRepository: Default journal_mode for /config/data/library.db is walInfo SqliteItemRepository: PRAGMA synchronous=1Info App: Emby.Kodi.SyncQueue IS NOW STARTING!!!Info App: Emby.Kodi.SyncQueue: Creating DB Repository...Info App: Emby.Kodi.SyncQueue: SyncAPI Created and Listening at "/Emby.Kodi.SyncQueue/{UserID}/{LastUpdateDT}/GetItems?format=json" - {LastUpdateDT} must be a UTC DateTime formatted as yyyy-MM-ddTHH:mm:ssZInfo App: Emby.Kodi.SyncQueue: SyncAPI Created and Listening at "/Emby.Kodi.SyncQueue/{UserID}/GetItems?LastUpdateDT={LastUpdateDT}&format=json" - {LastUpdateDT} must be a UTC DateTime formatted as yyyy-MM-ddTHH:mm:ssZInfo App: Emby.Kodi.SyncQueue: The following parameters also exist to filter the results:Info App: Emby.Kodi.SyncQueue: filter=movies,tvshows,music,musicvideos,boxsetsInfo App: Emby.Kodi.SyncQueue: Results will be included by default and only filtered if added to the filter query...Info App: Emby.Kodi.SyncQueue: the filter query must be lowercase in both the name and the items...Info HttpServer: Calling ServiceStack AppHost.InitInfo HttpServer: Adding HttpListener prefix http://+:8096/Info HttpServer: Adding HttpListener prefix https://+:8920/Info Skia: SkiaSharp version: 1.60.0.0Info App: Emby.Kodi.SyncQueue.Task: Retention Task Scheduled!Info TaskManager: Daily trigger for Configuration Backup set to fire at 7/29/18 12:10:00 AM, which is 471.425539001667 minutes from now.Info TaskManager: Daily trigger for Remove Old Sync Data set to fire at 7/29/18 12:01:00 AM, which is 462.425516281667 minutes from now.Info TaskManager: Daily trigger for Chapter image extraction set to fire at 7/29/18 2:00:00 AM, which is 581.425444061667 minutes from now.Info TaskManager: Daily trigger for Rotate log file set to fire at 7/29/18 12:00:00 AM, which is 461.425293305 minutes from now.Info MediaEncoder: FFMpeg: /bin/ffmpegInfo MediaEncoder: FFProbe: /bin/ffprobeInfo MediaEncoder: Validating media encoder at /bin/ffmpegInfo MediaEncoder: Running /bin/ffmpeg -decodersffmpeg version 4.0.1 Copyright (c) 2000-2018 the FFmpeg developersbuilt with gcc 6.3.0 (crosstool-NG crosstool-ng-1.23.0)configuration: --enable-cross-compile --cross-prefix=x86_64-pc-linux-gnu- --cc=x86_64-pc-linux-gnu-gcc --cxx=x86_64-pc-linux-gnu-g++ --arch=x86_64 --prefix=/home/embybuilder/Buildbot-master/x64/ffmpeg-x64/staging --pkg-config=pkg-config --disable-doc --disable-ffplay --disable-xlib --enable-fontconfig --enable-gnutls --enable-gpl --enable-iconv --enable-libass --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libwebp --enable-libx264 --enable-libzvbi --enable-version3 --extra-libs='-ldl -lexpat -lfreetype -lfribidi -lfontconfig -liconv -lpng -luuid -lz -lvorbis -logg -lnettle -lhogweed -lgmp -laddns-samba4 -lasn1util-samba4 -lauthkrb5-samba4 -lCHARSET3-samba4 -lcliauth-samba4 -lcli-cldap-samba4 -lcli-ldap-common-samba4 -lcli-nbt-samba4 -lcli-smb-common-samba4 -lcom_err -lcommon-auth-samba4 -ldbwrap-samba4 -ldcerpc-binding -ldcerpc-samba-samba4 -lflag-mapping-samba4 -lgenrand-samba4 -lgensec-samba4 -lgse-samba4 -lgssapi_krb5 -llibcli-lsa3-samba4 -llibsmb-samba4 -linterfaces-samba4 -liov-buf-samba4 -lk5crypto -lkrb5 -lkrb5samba-samba4 -lkrb5support -lldb -lldbsamba-samba4 -lmessages-dgm-samba4 -lmessages-util-samba4 -lmsghdr-samba4 -lmsrpc3-samba4 -lndr -lndr-krb5pac -lndr-nbt -lndr-samba-samba4 -lndr-standard -lreplace-samba4 -lsamba-cluster-support-samba4 -lsamba-credentials -lsamba-debug-samba4 -lsamba-errors -lsamba-hostconfig -lsamba-modules-samba4 -lsamba-security-samba4 -lsamba-sockets-samba4 -lsamba-util -lsamba3-util-samba4 -lsamdb -lsamdb-common-samba4 -lsecrets3-samba4 -lserver-id-db-samba4 -lserver-role-samba4 -lsmbconf -lsmbd-shim-samba4 -lsmb-transport-samba4 -lsocket-blocking-samba4 -lsys-rw-samba4 -ltalloc -ltalloc-report-samba4 -ltdb -ltdb-wrap-samba4 -ltevent -ltevent-util -ltime-basic-samba4 -lutil-cmdline-samba4 -lutil-reg-samba4 -lutil-setid-samba4 -lutil-tdb-samba4 -lwbclient -lwinbind-client-samba4 -ldrm' --target-os=linux --enable-shared --disable-static --enable-libsmbclient --enable-cuda --enable-cuvid --enable-nvenc --enable-vaapilibavutil 56. 14.100 / 56. 14.100libavcodec 58. 18.100 / 58. 18.100libavformat 58. 12.100 / 58. 12.100libavdevice 58. 3.100 / 58. 3.100libavfilter 7. 16.100 / 7. 16.100libswscale 5. 1.100 / 5. 1.100libswresample 3. 1.100 / 3. 1.100libpostproc 55. 1.100 / 55. 1.100Info MediaEncoder: Decoder available: mpeg2videoInfo MediaEncoder: Decoder available: h264_cuvidInfo MediaEncoder: Decoder available: hevc_cuvidInfo MediaEncoder: Decoder available: mpeg2_cuvidInfo MediaEncoder: Decoder available: mpeg4_cuvidInfo MediaEncoder: Decoder available: vc1_cuvidInfo MediaEncoder: Decoder available: vp8_cuvidInfo MediaEncoder: Decoder available: vp9_cuvidInfo MediaEncoder: Decoder available: ac3Info MediaEncoder: Decoder available: aacInfo MediaEncoder: Decoder available: mp3Info MediaEncoder: Decoder available: h264Info MediaEncoder: Decoder available: hevcInfo MediaEncoder: Running /bin/ffmpeg -encodersffmpeg version 4.0.1 Copyright (c) 2000-2018 the FFmpeg developersbuilt with gcc 6.3.0 (crosstool-NG crosstool-ng-1.23.0)configuration: --enable-cross-compile --cross-prefix=x86_64-pc-linux-gnu- --cc=x86_64-pc-linux-gnu-gcc --cxx=x86_64-pc-linux-gnu-g++ --arch=x86_64 --prefix=/home/embybuilder/Buildbot-master/x64/ffmpeg-x64/staging --pkg-config=pkg-config --disable-doc --disable-ffplay --disable-xlib --enable-fontconfig --enable-gnutls --enable-gpl --enable-iconv --enable-libass --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libwebp --enable-libx264 --enable-libzvbi --enable-version3 --extra-libs='-ldl -lexpat -lfreetype -lfribidi -lfontconfig -liconv -lpng -luuid -lz -lvorbis -logg -lnettle -lhogweed -lgmp -laddns-samba4 -lasn1util-samba4 -lauthkrb5-samba4 -lCHARSET3-samba4 -lcliauth-samba4 -lcli-cldap-samba4 -lcli-ldap-common-samba4 -lcli-nbt-samba4 -lcli-smb-common-samba4 -lcom_err -lcommon-auth-samba4 -ldbwrap-samba4 -ldcerpc-binding -ldcerpc-samba-samba4 -lflag-mapping-samba4 -lgenrand-samba4 -lgensec-samba4 -lgse-samba4 -lgssapi_krb5 -llibcli-lsa3-samba4 -llibsmb-samba4 -linterfaces-samba4 -liov-buf-samba4 -lk5crypto -lkrb5 -lkrb5samba-samba4 -lkrb5support -lldb -lldbsamba-samba4 -lmessages-dgm-samba4 -lmessages-util-samba4 -lmsghdr-samba4 -lmsrpc3-samba4 -lndr -lndr-krb5pac -lndr-nbt -lndr-samba-samba4 -lndr-standard -lreplace-samba4 -lsamba-cluster-support-samba4 -lsamba-credentials -lsamba-debug-samba4 -lsamba-errors -lsamba-hostconfig -lsamba-modules-samba4 -lsamba-security-samba4 -lsamba-sockets-samba4 -lsamba-util -lsamba3-util-samba4 -lsamdb -lsamdb-common-samba4 -lsecrets3-samba4 -lserver-id-db-samba4 -lserver-role-samba4 -lsmbconf -lsmbd-shim-samba4 -lsmb-transport-samba4 -lsocket-blocking-samba4 -lsys-rw-samba4 -ltalloc -ltalloc-report-samba4 -ltdb -ltdb-wrap-samba4 -ltevent -ltevent-util -ltime-basic-samba4 -lutil-cmdline-samba4 -lutil-reg-samba4 -lutil-setid-samba4 -lutil-tdb-samba4 -lwbclient -lwinbind-client-samba4 -ldrm' --target-os=linux --enable-shared --disable-static --enable-libsmbclient --enable-cuda --enable-cuvid --enable-nvenc --enable-vaapilibavutil 56. 14.100 / 56. 14.100libavcodec 58. 18.100 / 58. 18.100libavformat 58. 12.100 / 58. 12.100libavdevice 58. 3.100 / 58. 3.100libavfilter 7. 16.100 / 7. 16.100libswscale 5. 1.100 / 5. 1.100libswresample 3. 1.100 / 3. 1.100libpostproc 55. 1.100 / 55. 1.100Info MediaEncoder: Encoder available: libx264Info MediaEncoder: Encoder available: mpeg4Info MediaEncoder: Encoder available: msmpeg4Info MediaEncoder: Encoder available: aacInfo MediaEncoder: Encoder available: libmp3lameInfo MediaEncoder: Encoder available: libopusInfo MediaEncoder: Encoder available: libvorbisInfo MediaEncoder: Encoder available: srtInfo MediaEncoder: Encoder available: h264_nvencInfo MediaEncoder: Encoder available: hevc_nvencInfo MediaEncoder: Encoder available: h264_vaapiInfo MediaEncoder: Encoder available: hevc_vaapiInfo MediaEncoder: Encoder available: h264_v4l2m2mInfo MediaEncoder: Encoder available: libwebpInfo MediaEncoder: Encoder available: ac3Info MediaEncoder: Running /bin/ffmpeg -protocolsffmpeg version 4.0.1 Copyright (c) 2000-2018 the FFmpeg developersbuilt with gcc 6.3.0 (crosstool-NG crosstool-ng-1.23.0)configuration: --enable-cross-compile --cross-prefix=x86_64-pc-linux-gnu- --cc=x86_64-pc-linux-gnu-gcc --cxx=x86_64-pc-linux-gnu-g++ --arch=x86_64 --prefix=/home/embybuilder/Buildbot-master/x64/ffmpeg-x64/staging --pkg-config=pkg-config --disable-doc --disable-ffplay --disable-xlib --enable-fontconfig --enable-gnutls --enable-gpl --enable-iconv --enable-libass --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libwebp --enable-libx264 --enable-libzvbi --enable-version3 --extra-libs='-ldl -lexpat -lfreetype -lfribidi -lfontconfig -liconv -lpng -luuid -lz -lvorbis -logg -lnettle -lhogweed -lgmp -laddns-samba4 -lasn1util-samba4 -lauthkrb5-samba4 -lCHARSET3-samba4 -lcliauth-samba4 -lcli-cldap-samba4 -lcli-ldap-common-samba4 -lcli-nbt-samba4 -lcli-smb-common-samba4 -lcom_err -lcommon-auth-samba4 -ldbwrap-samba4 -ldcerpc-binding -ldcerpc-samba-samba4 -lflag-mapping-samba4 -lgenrand-samba4 -lgensec-samba4 -lgse-samba4 -lgssapi_krb5 -llibcli-lsa3-samba4 -llibsmb-samba4 -linterfaces-samba4 -liov-buf-samba4 -lk5crypto -lkrb5 -lkrb5samba-samba4 -lkrb5support -lldb -lldbsamba-samba4 -lmessages-dgm-samba4 -lmessages-util-samba4 -lmsghdr-samba4 -lmsrpc3-samba4 -lndr -lndr-krb5pac -lndr-nbt -lndr-samba-samba4 -lndr-standard -lreplace-samba4 -lsamba-cluster-support-samba4 -lsamba-credentials -lsamba-debug-samba4 -lsamba-errors -lsamba-hostconfig -lsamba-modules-samba4 -lsamba-security-samba4 -lsamba-sockets-samba4 -lsamba-util -lsamba3-util-samba4 -lsamdb -lsamdb-common-samba4 -lsecrets3-samba4 -lserver-id-db-samba4 -lserver-role-samba4 -lsmbconf -lsmbd-shim-samba4 -lsmb-transport-samba4 -lsocket-blocking-samba4 -lsys-rw-samba4 -ltalloc -ltalloc-report-samba4 -ltdb -ltdb-wrap-samba4 -ltevent -ltevent-util -ltime-basic-samba4 -lutil-cmdline-samba4 -lutil-reg-samba4 -lutil-setid-samba4 -lutil-tdb-samba4 -lwbclient -lwinbind-client-samba4 -ldrm' --target-os=linux --enable-shared --disable-static --enable-libsmbclient --enable-cuda --enable-cuvid --enable-nvenc --enable-vaapilibavutil 56. 14.100 / 56. 14.100libavcodec 58. 18.100 / 58. 18.100libavformat 58. 12.100 / 58. 12.100libavdevice 58. 3.100 / 58. 3.100libavfilter 7. 16.100 / 7. 16.100libswscale 5. 1.100 / 5. 1.100libswresample 3. 1.100 / 3. 1.100libpostproc 55. 1.100 / 55. 1.100Info MediaEncoder: Encoder validation completeInfo MediaEncoder: ffmpeg supported protocols: async,cache,concat,crypto,data,ffrtmphttp,file,ftp,gopher,hls,http,httpproxy,https,mmsh,mmst,pipe,rtmp,rtmps,rtmpt,rtmpts,rtp,srtp,subfile,tcp,tls,udp,udplite,unix,smbInfo App: ServerId: 035dcf2060ab4d5aa7f13f382d418fccInfo App: Starting entry point MediaBrowser.WebDashboard.ServerEntryPointInfo App: Entry point completed: MediaBrowser.WebDashboard.ServerEntryPoint. Duration: 0.0008771 secondsInfo App: Starting entry point Emby.Dlna.Main.DlnaEntryPointInfo App: Entry point completed: Emby.Dlna.Main.DlnaEntryPoint. Duration: 0.215917 secondsInfo App: Starting entry point Emby.Server.Connect.ConnectEntryPointInfo App: Loading data from /config/data/connect.txtInfo App: Loading data from /config/data/wan.datInfo App: Entry point completed: Emby.Server.Connect.ConnectEntryPoint. Duration: 0.0226093 secondsInfo App: Core startup completeInfo App: Post-init migrations completeInfo App: Starting entry point Emby.Security.PluginSecurityManagerInfo App: Entry point completed: Emby.Security.PluginSecurityManager. Duration: 7.32E-05 secondsInfo App: Starting entry point Emby.Server.CinemaMode.IntrosEntryPointInfo App: Entry point completed: Emby.Server.CinemaMode.IntrosEntryPoint. Duration: 0.0002546 secondsInfo App: Starting entry point Emby.Security.PluginSecurityManagerInfo App: Entry point completed: Emby.Security.PluginSecurityManager. Duration: 6.63E-05 secondsInfo App: Starting entry point MBBackup.ServerEntryPointInfo App: Entry point completed: MBBackup.ServerEntryPoint. Duration: 8.73E-05 secondsInfo App: Starting entry point Emby.Kodi.SyncQueue.EntryPoints.LibrarySyncNotificationInfo App: Emby.Kodi.SyncQueue: LibrarySyncNotification Startup...Info App: Entry point completed: Emby.Kodi.SyncQueue.EntryPoints.LibrarySyncNotification. Duration: 0.0013459 secondsInfo App: Starting entry point Emby.Kodi.SyncQueue.EntryPoints.UserSyncNotificationInfo App: Emby.Kodi.SyncQueue: UserSyncNotification Startup...Info App: Entry point completed: Emby.Kodi.SyncQueue.EntryPoints.UserSyncNotification. Duration: 0.0005684 secondsInfo App: Starting entry point AutoBoxSets.ServerEntryPointInfo App: Entry point completed: AutoBoxSets.ServerEntryPoint. Duration: 0.0083531 secondsInfo App: Starting entry point Trakt.ServerMediatorInfo App: Entry point completed: Trakt.ServerMediator. Duration: 0.0006459 secondsInfo App: Starting entry point Emby.Security.PluginSecurityManagerInfo App: Entry point completed: Emby.Security.PluginSecurityManager. Duration: 3.8E-05 secondsInfo App: Starting entry point MediaBrowser.Plugins.Trailers.EntryPointInfo App: Entry point completed: MediaBrowser.Plugins.Trailers.EntryPoint. Duration: 0.0008107 secondsInfo App: Starting entry point MediaBrowser.Api.ApiEntryPointInfo App: Entry point completed: MediaBrowser.Api.ApiEntryPoint. Duration: 5.01E-05 secondsInfo App: Starting entry point Emby.Server.Implementations.News.NewsEntryPointInfo App: Entry point completed: Emby.Server.Implementations.News.NewsEntryPoint. Duration: 0.0003396 secondsInfo App: Starting entry point Emby.Server.Implementations.LiveTv.EmbyTV.EntryPointInfo App: Loading live tv data from /config/data/livetv/timersInfo Dlna: Registering publisher for urn:schemas-upnp-org:device:MediaServer:1 on 192.168.1.12Info Dlna: Registering publisher for urn:schemas-upnp-org:device:MediaServer:1 on fe80::84f7:feff:feb3:eaa1%10Info App: Entry point completed: Emby.Server.Implementations.LiveTv.EmbyTV.EntryPoint. Duration: 0.2496067 secondsInfo App: Starting entry point Emby.Server.Implementations.Library.DeviceAccessEntryPointInfo App: Entry point completed: Emby.Server.Implementations.Library.DeviceAccessEntryPoint. Duration: 0.0005746 secondsInfo App: Starting entry point Emby.Server.Implementations.IO.LibraryMonitorStartupInfo App: Entry point completed: Emby.Server.Implementations.IO.LibraryMonitorStartup. Duration: 0.026061 secondsInfo App: Starting entry point Emby.Server.Implementations.EntryPoints.AutomaticRestartEntryPointInfo App: Entry point completed: Emby.Server.Implementations.EntryPoints.AutomaticRestartEntryPoint. Duration: 0.0010322 secondsInfo App: Starting entry point Emby.Server.Implementations.EntryPoints.ExternalPortForwardingInfo App: Entry point completed: Emby.Server.Implementations.EntryPoints.ExternalPortForwarding. Duration: 0.0253142 secondsInfo App: Starting entry point Emby.Server.Implementations.EntryPoints.KeepServerAwakeInfo App: Entry point completed: Emby.Server.Implementations.EntryPoints.KeepServerAwake. Duration: 0.0003653 secondsInfo App: Starting entry point Emby.Server.Implementations.EntryPoints.LibraryChangedNotifierInfo LibraryMonitor: Watching directory /mnt/user/TV Shows/Kids TVInfo LibraryMonitor: Watching directory /mnt/user/MusicInfo App: Entry point completed: Emby.Server.Implementations.EntryPoints.LibraryChangedNotifier. Duration: 0.0023262 secondsInfo App: Starting entry point Emby.Server.Implementations.EntryPoints.RecordingNotifierInfo App: Entry point completed: Emby.Server.Implementations.EntryPoints.RecordingNotifier. Duration: 0.0020399 secondsInfo App: Starting entry point Emby.Server.Implementations.EntryPoints.ServerEventNotifierInfo App: Entry point completed: Emby.Server.Implementations.EntryPoints.ServerEventNotifier. Duration: 0.0040751 secondsInfo App: Starting entry point Emby.Server.Implementations.EntryPoints.StartupWizardInfo App: Entry point completed: Emby.Server.Implementations.EntryPoints.StartupWizard. Duration: 0.0008806 secondsInfo App: Starting entry point Emby.Server.Implementations.EntryPoints.SystemEventsInfo App: Entry point completed: Emby.Server.Implementations.EntryPoints.SystemEvents. Duration: 0.0005537 secondsInfo App: Starting entry point Emby.Server.Implementations.EntryPoints.UdpServerEntryPointInfo App: Entry point completed: Emby.Server.Implementations.EntryPoints.UdpServerEntryPoint. Duration: 0.0025383 secondsInfo App: Starting entry point Emby.Server.Implementations.EntryPoints.UsageEntryPointInfo App: Entry point completed: Emby.Server.Implementations.EntryPoints.UsageEntryPoint. Duration: 0.0034315 secondsInfo App: Starting entry point Emby.Server.Implementations.EntryPoints.UserDataChangeNotifierInfo App: Entry point completed: Emby.Server.Implementations.EntryPoints.UserDataChangeNotifier. Duration: 0.0002411 secondsInfo App: Starting entry point Emby.Server.Implementations.Devices.DeviceManagerEntryPointInfo App: Entry point completed: Emby.Server.Implementations.Devices.DeviceManagerEntryPoint. Duration: 0.0021435 secondsInfo App: Starting entry point Emby.Server.Implementations.Collections.CollectionManagerEntryPointInfo App: Entry point completed: Emby.Server.Implementations.Collections.CollectionManagerEntryPoint. Duration: 0.0025101 secondsInfo App: Starting entry point Emby.Server.Implementations.Activity.ActivityLogEntryPointInfo App: Entry point completed: Emby.Server.Implementations.Activity.ActivityLogEntryPoint. Duration: 0.0061298 secondsInfo App: Starting entry point Emby.Server.MediaEncoding.Api.ApiEntryPointInfo App: Entry point completed: Emby.Server.MediaEncoding.Api.ApiEntryPoint. Duration: 0.0012778 secondsInfo App: Starting entry point Emby.Notifications.NotificationsInfo App: Entry point completed: Emby.Notifications.Notifications. Duration: 0.0011959 secondsInfo App: Starting entry point MediaBrowser.XbmcMetadata.EntryPointInfo App: Entry point completed: MediaBrowser.XbmcMetadata.EntryPoint. Duration: 0.0002772 secondsInfo App: Starting entry point Emby.Security.PluginSecurityManagerInfo App: Entry point completed: Emby.Security.PluginSecurityManager. Duration: 4.74E-05 secondsInfo App: Starting entry point Emby.Server.Sync.SyncManagerEntryPointInfo App: Sqlite version: 3.24.0Info App: Sqlite compiler options: COMPILER=gcc-6.3.0,ENABLE_COLUMN_METADATA,ENABLE_DBSTAT_VTAB,ENABLE_FTS3,ENABLE_FTS3_PARENTHESIS,ENABLE_FTS3_TOKENIZER,ENABLE_FTS5,ENABLE_JSON1,ENABLE_PREUPDATE_HOOK,ENABLE_RTREE,ENABLE_SESSION,ENABLE_UNLOCK_NOTIFY,ENABLE_UPDATE_DELETE_LIMIT,LIKE_DOESNT_MATCH_BLOBS,MAX_SCHEMA_RETRY=25,MAX_VARIABLE_NUMBER=250000,OMIT_LOOKASIDE,SECURE_DELETE,THREADSAFE=1Info App: Default journal_mode for /config/data/sync14.db is walInfo App: PRAGMA synchronous=1Info App: Entry point completed: Emby.Server.Sync.SyncManagerEntryPoint. Duration: 0.0164295 secondsInfo App: Starting entry point Emby.Server.Sync.SyncNotificationEntryPointInfo App: Entry point completed: Emby.Server.Sync.SyncNotificationEntryPoint. Duration: 0.0029778 secondsInfo App: All entry points have startedUnhandledExceptionSystem.IO.IOException: Unable to read data from the transport connection: Connection reset by peer. ---> System.Net.Sockets.SocketException: Connection reset by peer--- End of inner exception stack trace ---at System.Net.Sockets.Socket.AwaitableSocketAsyncEventArgs.ThrowException(SocketError error)at System.Net.Sockets.Socket.AwaitableSocketAsyncEventArgs.GetResult(Int16 token)at System.Net.FixedSizeReader.ReadPacketAsync(Stream transport, AsyncProtocolRequest request)at System.Net.Security.SslState.ThrowIfExceptional()at System.Net.Security.SslState.CheckThrow(Boolean authSuccessCheck, Boolean shutdownCheck)at System.Net.Security.SslState.CheckOldKeyDecryptedData(Memory`1 buffer)at System.Net.Security.SslState.HandleQueuedCallback(Object& queuedStateRequest)at System.Net.Security.SslState.FinishHandshakeRead(Int32 newState)at System.Net.Security.SslState.FinishHandshake(Exception e, AsyncProtocolRequest asyncRequest)at System.Net.Security.SslState.RehandshakeCompleteCallback(IAsyncResult result)at System.Net.LazyAsyncResult.Complete(IntPtr userToken)at System.Net.LazyAsyncResult.ProtectedInvokeCallback(Object result, IntPtr userToken)at System.Net.AsyncProtocolRequest.CompleteUserWithError(Exception e)at System.Net.FixedSizeReader.ReadPacketAsync(Stream transport, AsyncProtocolRequest request)at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)--- End of stack trace from previous location where exception was thrown ---at System.Threading.ThreadPoolWorkQueue.Dispatch()System.IO.IOExceptionat System.Net.Sockets.Socket.AwaitableSocketAsyncEventArgs.ThrowException(SocketError error)at System.Net.Sockets.Socket.AwaitableSocketAsyncEventArgs.GetResult(Int16 token)at System.Net.FixedSizeReader.ReadPacketAsync(Stream transport, AsyncProtocolRequest request)at System.Net.Security.SslState.ThrowIfExceptional()at System.Net.Security.SslState.CheckThrow(Boolean authSuccessCheck, Boolean shutdownCheck)at System.Net.Security.SslState.CheckOldKeyDecryptedData(Memory`1 buffer)at System.Net.Security.SslState.HandleQueuedCallback(Object& queuedStateRequest)at System.Net.Security.SslState.FinishHandshakeRead(Int32 newState)at System.Net.Security.SslState.FinishHandshake(Exception e, AsyncProtocolRequest asyncRequest)at System.Net.Security.SslState.RehandshakeCompleteCallback(IAsyncResult result)at System.Net.LazyAsyncResult.Complete(IntPtr userToken)at System.Net.LazyAsyncResult.ProtectedInvokeCallback(Object result, IntPtr userToken)at System.Net.AsyncProtocolRequest.CompleteUserWithError(Exception e)at System.Net.FixedSizeReader.ReadPacketAsync(Stream transport, AsyncProtocolRequest request)at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)--- End of stack trace from previous location where exception was thrown ---at System.Threading.ThreadPoolWorkQueue.Dispatch()InnerException: System.Net.Sockets.SocketExceptionSystem.Net.Sockets.SocketException (104): Connection reset by peer[cont-finish.d] executing container finish scripts...[cont-finish.d] done.[s6-finish] syncing disks.[s6-finish] sending all processes the TERM signal.[s6-finish] sending all processes the KILL signal and exiting.

SOunds like a question for the NZBGet forums then. Sorry bud

Go to settings>Incoming NZBS and see if DupeCheck is set to yes. You haven't cleared your HIDDEN History, have you? I think that also keeps a record of what has already downloaded. (Correct me if I am wrong).