sittingmongoose
-
Posts
326 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by sittingmongoose
-
-
15 minutes ago, Airwolf99 said:
Did you end up finding a fix for this? I'm having the same issue and haven't been able to find one yet. It only happens when HW acceleration is enabled.
I did, here you go.
-
17 hours ago, ich777 said:
As said above if the device in the template '/dev/dri' doesn't exist it shouldn't be able to use it anyways because it simply can't see it.
But of course uninstall the Intel-GPU-TOP, remove the /boot/config/modprobe.d/i915.conf file and reboot.
Then the iGPU isn't activated and the container or unRAID won't be able to use it for hardware acceleration things.
Removing that file and uninstalling intel top fixed the problem. I dont need the vm anymore. Thank you!
Interestingly, when my 10850k was properly setup for igpu in plex, it woldnt show "video enhance load" when it was transcoding. But when my 9900k transcodes with igpu, it does show "video enhance load" when transcoding.
-
1
-
-
28 minutes ago, ich777 said:
Sorry but I really can't help here since I can't think of a way that the Container can even see the iGPU without create a device mapping with '/dev/dri' in the template.
It definetely doesn't have anything to do with the Nvidia plugin.
From what I see try to uninstall the Intel-GPU-TOP plugin and make sure that you don't activate the iGPU on boot with /boot/config/modprobe.d/i915.conf and reboot. After you did this the iGPU should be deactivated and Plex can't use it amymore.
What you can also do to ask on the Plex forums how to force to use the Nvidia GPU instead of the iGPU but as said I have no clue why this is even possible when you haven't created the device mapping in the template.
You're a fucking genius!!!! So previously I had a VM using my iGPU, I stopped booting that VM though. I fired that VM up and now Plex uses my P2000! So now I just need to keep that VM up lol. Is there a way to snub the iGPU so that Docker wont use it but my VM can if I want to turn it on?
-
42 minutes ago, ich777 said:
Can you send screenshots where it is visible that it uses the iGPU instead of the Nvidia GPU?
I can't imagine that it uses your iGPU when you don't passed through the device /dev/dri like @alturismo said before.
Why would you do that when Emby and Trex are fine using them, then there must be something wrong with the template itself.
Can you post a few screenshots from your Docker template with the Advanced View turned on in the top right corner?
I have tried binhex, linux server, and offcial plex docker builds with their templates. I even tried starting fresh. Here are all the screenshots. I can see in gpu statistics that my intel igpu usage shoots up when i transcode, and goes down when i stop transcode.
-
47 minutes ago, alturismo said:
and you dont have /dev/dri as device or in extra parameters setup ?
and about HDR tone mapping in plex, check plex forums and you see some threads about it, there are workarounds howto ...
No dev/dri. I have —runtime=Nvidia in my extra parameter spot.
Hdr tone mapping did work a month or two ago on my p2000. Do you happen to have some links to those threads? Navigating Plex forums is a nightmare.
-
15 hours ago, mike2246 said:
Having trouble getting my GPU Transcoder to work. I've followed all the steps and it's still using CPU to transcode.
I've watched the SpaceInvader Video along with reading through here. I've tried the Plex LinuxServer Docker along with the binhex-plexpass. I believe I've attached all the screenshots needed. Also tried rebooting the server along with the plex docker
@ich777I am actually having this exact issue, except I am not seeing any processes in watch nvidia-smi. It is using my 10850K iGPU despite not having it setup to use igpu at all. Im not even sure how it accesses it. I see the activity in my igpu though on gpu statistics.
My trex mining docker uses my P2000 fine, as does emby. I am not running them while I am trying to get Plex to work.
I have tried reinstalling the nvidia driver plugin, tried different driver versions, tried different plex versions and repositories. I even tried a fresh version of Plex thinking maybe my Plex config was bad. My VM is not using any gpus, I have tried several system reboots too. This all used to work fine and then one day a few weeks ago it stopped.
At one point, disabling HDR tonemapping in Plex allowed Plex to use the P2000 again but then that stopped at some point too.
My biggest issue is, when using my iGPU my Plex docker crashes often. I then configured the iGPU correctly and it is more stable but still crashes from time to time. I really need this P2000 working as it was stable as a rock.
-
@binhexStill having issues with Plex using my intel igpu instead of my nvidia p2000. Tried different plex versions and different nvidia drivers. It was working partially(only with hdr tonemapping off), and a few months ago it was working completely. I just switched to Plex official and linuxserver. Im switching back to Binhex Plex to see if that fixes it. (I was running Binhex until about a month ago.). Which docker should I pull? I am a Plex pass user who uses beta.
binhex/arch-plexpass or
binhex/arch-plex
Edit: Switched to plexpass, still having the issue where its using my igpu...
Edit edit: I am dumb and posted this comment in the linuxserver build lol sorry! I deleted that comment and moved it here.
-
1 hour ago, arturovf said:
Must confess that mobo (Asus Z590-E) and processor (11600k) are still in the box as I have a lot of 4k HDR movies and don't want to have downtime of the service, I read several reports of artifacts and no reports of it working perfectly or fixed so I assumed it was still not working, but if you tell me everything is ready I will unbox in no time! Thats great news!
Well the 10600k is like 60$ cheaper. If you did swap, make sure you know if you use a z590 mobo with a 10 series intel, your top nvme slot wont work. So either youre ok with that or you need to find a z490 mobo.
As for unraid support for the 11 series intels. I think its going to be a few months. They havent even released betas of a new version yet. Its been a few months since stable release though.
-
11 minutes ago, arturovf said:
It appears almost nobody is running intel 11th gen processors with Plex since they don't even notice it doesn't work
Not really surprising. I dont know why anyone would buy the 11th gen for desktop over 10th gen. 10th gen offers more cores and is on huge sales. 11th gen has xe graphics though, but in that case its a negative lol. I just upgraded my servers and went for the 10th gen series specifically because i wanted the higher core count.
-
19 minutes ago, Presjar said:
Oh I see. Because it's a UHD750 the same driver as the lower end 11th gen 730 and 10th gen 630 (i915 Driver) is not working correctly?
It’s very possible, there were a lot of issues supporting 9000 series for a while on unRAID for the same reason. hopefully I’m wrong though. Someone will hopefully chime in.
-
18 minutes ago, Presjar said:
Hi,
I'm setting up a new server with the 11600 CPU.
I get this log from the plex docker when trying to hardware convert with HDR to SDR tone mapping. The image also has corruptions (see attached image). Intel_gpu_top shows very high gpu usage. 70-80% Video, 30% Render.
beignet-opencl-icd: no supported GPU found, this is probably the wrong opencl-icd package for this hardware (If you have multiple ICDs installed and OpenCL works, you can ignore this message)
I'm using Unraid 6.9.2.
I am NOT running any i915 file in /boot/config/modprobe.d or modification to the go file.
I only installed intel-gpu-top plugin and rebooted the server.
The plex docker image I am using is ghcr.io/linuxserver/plex
Using tag latest
My render location is /tmp
Hardware dev/dri passthrough to docker is on.
Any assistance regards clearing the transcode image corruptions and the open-cl error would be most appreciated.
Edit: I also tried setting an older static plex docker image as suggested in another post. plex:version-1.22.0.4163-d8c4875dd. Still the same result with HDR to SDR on
I posted this in another subforum also.
Very possibly a driver issue. UnRAIDs linux drivers are very behind and the xe graphics are very different.
-
4 hours ago, binhex said:
if you can come up with a rough date then check the 'last pushed' date for binhex-plex image tags, this will show you when the image was built, if that doesnt help then try rolling back the driver, link to tags:-
link to tags:- https://registry.hub.docker.com/repository/docker/binhex/arch-plexpass/tags?page=1&ordering=last_updated
So I tried rolling back nvidia drivers by two versions. That didnt fix it. I tried rolling back versions of plex, and went as far back as like 3 months. That didnt fix it.
However, now nvidia transcoding wont work at all...I tried multiple versions of drivers and multiple docker images. It just keeps using my intel igpu instead of my nvidia p2000 even though i have nothing about the igpu in my docker config and it was working on these same version a few hours ago....(Not working with or without hdr transcoding). I even tried a few versions of nvidia drivers.
-
6 hours ago, binhex said:
in that case i would suspect its either a driver bug thats been introduced or a bug in plex pass, try older driver versions and rolling back to previous versions of plex pass, keep in mind plex pass is basically beta releases of plex, if you want a more stable experience then go with binhex-plex, thats what i use.
question, has this EVER worked?.
Yes it worked, it stopped some point in the last few weeks. I tried rolling back plex server versions but it didnt seem to help. Maybe I didnt got far enough back. I can try rolling nvidia drivers back. I noticed because I was looking into why plex was crashing over and over and over. Took me weeks to figure it out. It was this setting.
-
Having an issue with my p2000 not being used when HDR tonemapping is enabled in Plex. When I enable hdr tonemapping it starts using my iGPU which i dont even have outlined in my docker template...With hdr tonemapping disabled my p2000 works as expected. Im running the newest nvidia driver, newest plex server beta from linuxserver/Binhex/offcial plex with plexpass all do it.
Im using unraid 6.9.2, plex server beta 1.23.5.484, nvidia driver v470.57.02
-
Having an issue with my p2000 not being used when HDR tonemapping is enabled in Plex. When I enable hdr tonemapping it starts using my iGPU which i dont even have outlined in my docker template...With hdr tonemapping disabled my p2000 works as expected. Im running the newest nvidia driver, newest plex server beta from linuxserver with plexpass.
Im using unraid 6.9.2, plex server beta 1.23.5.484, nvidia driver v470.57.02
-
On 6/26/2021 at 4:37 AM, binhex said:
I use this image myself and other then 1 crash several months ago It had been solid for literally years. If you are doing GPU transcoding then I would encourage you to try different versions of the driver, as it could well be related to that
Sent from my CLT-L09 using Tapatalk
Tried installing a Nvidia driver update, didn’t help. Also rebooted a few times and tried without vms running. Didn’t help. Anymore ideas?
-
6 hours ago, binhex said:
I use this image myself and other then 1 crash several months ago It had been solid for literally years. If you are doing GPU transcoding then I would encourage you to try different versions of the driver, as it could well be related to that
Sent from my CLT-L09 using Tapatalk
I’ll play around with that. I did just update my gpu driver last night. Maybe that will help.
-
I have been experiencing a lot of Plex just crapping out on me. Works totally fine for a few hours and then it just disconnects my users and no one can get back in. No errors in unraid, no errors in the plex logs. I have to restart plex and it works again for a few hours. I noticed it starting this a week or two ago. Happens locally and remote. I have a really beefy server too so I dont think its that. I also have high end networking equipment and a fiber connection. So I think its just an issue with Plex. Anyone else having issues with it?
-
1 hour ago, PTRFRLL said:
The WALLET variable on the docker is passed to the -u flag of T-Rex, so just enter everything in that field:
Thanks for this! Is there a way to add the --mt 3 variable too?
-
Anyway to add email to this? Trying to use Nanopool which requires and email to be passed through. This is from the nanopool wiki.
Make sure your ETH-nanopool.bat file looks like this:
t-rex.exe -a ethash -o stratum+tcp://eth-eu1.nanopool.org:9999 -u YOUR_WALLET_ADDRESS.YOUR_WORKER_NAME/YOUR_EMAIL -p x
Where:
YOUR_ADDRESS - your valid Ethereum address
YOUR_WORKER - simple short worker name (like worker01). Optional.
YOUR_EMAIL - your email address for notifications. Optional.
-
Yep…it’s happening to me too again!
-
Having the same issue with getting mt to work. I have it in my json, and i tried passing through an mt variable on the docker template. Using a P2000.
-
1
-
-
5 minutes ago, binhex said:
it is.
try some of the others, it could well be a temporary outage from pia, it happens!.
So there was a browser cache issue, even though it was working it was failing to load. Not sure if some of the earlier ones worked or not but denmark worked for me.
-
4 hours ago, binhex said:
change the endpoint, see q28 for how to do this:- https://github.com/binhex/documentation/blob/master/docker/faq/vpn.md
May I ask if there is a list of end points that support port forwarding for wireguard for PIA? I se that list in supervisord but it doesnt say this is a list that supports port forwarding and i tried a few but they still give the same error. I am in the US on the east coast if that matters.
[support] Vaultwarden (formerly Bitwarden_rs)
in Docker Containers
Posted · Edited by sittingmongoose
I can no longer access Bitwarden. When a user tries it says login session expired. When I try to login to the admin page, it says my token is wrong. I check the docker config and the file itself. Tried those passwords and that didnt work either. I also tried resetting the token and that didnt help me getting into the admin page. I checked the time settings and all that seems ok. I am trying to access via a reverse proxy and directly. Neither works. It did work a few days ago though.
Any suggestions?
Edit: Also, it seems like when i input the correct admin token, and click enter, the page just refreshes and doesnt let me in.
Edit 2: SOLVED! Deleted the RSA files, started the docker and it works again!