falkfyrebeard

Hey thanks, during my research I did see to turn that off in the bios but the option wasn't there. I added this and did a reboot and am not seeing the errors so far. I'll run some tests and get back. Cheers

I'm not sure if I'm reading the syslog correctly but I think this could be a BIOS issue except I can't get the bios update to boot to install the new BIOS so I have reached out to manufacturer. I'm getting May 3 21:49:13 Wirelife25 kernel: pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 May 3 21:49:13 Wirelife25 kernel: pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) May 3 21:49:13 Wirelife25 kernel: pcieport 0000:00:1c.4: device [8086:7a3c] error status/mask=00000001/00002000 May 3 21:49:13 Wirelife25 kernel: pcieport 0000:00:1c.4: [ 0] RxErr (First) Over and over rapidly. This shows as a pcie bridge in System Devices. Anyone have any ideas. It is a brand new server. Worked for a few days but I hadn't attempted any large file transfers, only smaller ones. Once I did it fell apart. Easily able to reproduce the lock up. It just goes fully unresponsive, power button won't work, gui goes down, and drives go silent. Been running memtest for awhile with no errors. wirelife25-diagnostics-20250503-2147.zip

After going through all of this and found quite a bit that needed cleaning up it was still doing it. Eventually I had a drive throw some errors and I pulled it out. Not lock up since. Have had it up for 2 weeks and no issues since. Was doing this for awhile before any errors showed up. Very frustrating but glad it seems to be fixed now.

Hey thanks for your detailed insight. I'll go through these things and get back if I find a resolution or not.

I use cache shares. I have one share for zfs_backup that only uses my array disk. I have three cache pools. One called cache that is a zfs mirror, one that is a single cache disk for temp files like downloads, and one that is a zfs pool with 3 6tb drives and one ssd setup as cache for that pool. The array is a none parity protected signle zfs disk. One of the shares that was saying full was using the single disk cache for primary then the hdd pool for long term storage. I have since changed that to be the array. I could see there being a mover issue just not sure how to correct at this point. I removed the graphics card so I removed the nvidia plugin as well but would really like to use it for llama. I had resiable bar on when the card was in but disabled after I removed the card. UEFI is on. Issue has been going with or without it enabled. Computer is stable booting into a different OS. I've tried so many things I'm ready to nuke it and start over. Memtest passing with zero errors. Been running it for quite awhile.

My Server Zelda, hardware listed in signature, keeps locking up after ~1 day of running. Syslog is showing that one of my share's cache is full. It isn't and actually has 8.07TB available. It floods the syslog with it then it crashes. There are other errors in there too. I'm not sure if it is related but I had no issues until I added in an RTX 3070. After a couple days it started locking up like this. I removed the card to try to diagnose and even restored a backup but the problem persists now. This is going on a month I've been trying to fix this and it is driving me insane. zelda-diagnostics-20241130-0847.zip syslog-100.93.205.62.log

Hey, thanks for the reply. I decided to go through all of the questions and just learn a bit more. After adding my tailscale ips/32 to lan network I was at least getting a denied error. I was so focused on trying to just get in I had overlooked external access. I used firefox on the remote server and found remote access was disabled. Set it to full access and everything popped up. It's all good now. Thanks for the direction.

Been pulling my hair out trying to gain access to sabnzbdvpn container on my remote server. System is working but not web gui. After hours tonight I at least have a lead. I connect via tailscale with the tailscale plugin. On a hunch I tried installing the firefox browser container on the remote server and it has no problem accessing the web gui. This has me thinking it is due to the privoxy vpn and me accessing via a vpn. My brother's server is doing the same thing. Anyone have any suggestions on a direction I can take to straighten it out? I use NZB360 Android app and it can't access it either. Seems only devices on the same local network can. One thought I had was to just use swag's integrated tailscale and just proxy it through that. I'll have to test that tomorrow though.

Hey thanks! I'll need to get this on my list to try. I'm not 100% sure I did do that. Looking forward to checking it out

Quick question. I don't have a Mac VM set up right now. I've tried multiple times to and have an RX580 I passthrough to it but I've never been able to get audio, even from the display ports. In order to get it to work do I need to flash it? I've tried passing the VBIOS through instead of using what is on the card but no matter what I get no audio at all. I'd love to get a Mac VM set up at some point.

I know this seems to be marked as fixed in 6.12.3 but I am still running in to it on both of my servers on 6.12.3. Happened to both of them yesterday multiple times. The solution "umount /dev/loop2" fixes it every time.

Thanks. I'll give it a shot. I do run two Pi-Holes on it with static ips. I was leery of going to 6.10 on it due to beta and so many containers running but my virtualization server has been doing fine on it.

Finally got it to act up and get a capture. Looking at it I still can't figure out the issue at this point. syslog attached syslog-192.168.11.4.log

Got it set up logging to my other UnRaid server. Never know when it will act up again. Seen 2 days seen 13. Thanks for your help. I'll update when I have more information.

A bit at the end of my rope here. I keep getting kernal panic errors after 7-8 days of uptime. I've seen others have had this issue due to RAM timings but I don't use custom timings. I've been running 6.9.2 on my 1920x since it came out but this just started about 5 weeks ago out of the blue. I've done multiple days of memtests and deactivated a few plugins that FCP said were no longer supported. Does anyone have an suggestions on how to move forward? I think maybe it is network related. I install a 10Gb NIC about 4 months ago. I do have a custom "proxynet" for my docker containers per SpaceInvaderOne's videos. See Attached Diagnostics file 20220405.zip