f451

Kurzes Feedback: Der Transcend JetFlash 600 USB 2.0 mit 8GB (TS8GJF600) hat eine gültige GUID und wurde auch vom Unraid USB Creator erkannt. Der Key konnte erfolgreich getauscht werden.

Wobei gefühlt die Haltbarkeit der Sticks heutzutage auch eher in Wochen den in Jahren gemessen werden kann.....habe grade wieder drei "alte" weggeworfen. Der defekte Unraidstick lag unangeschlossen im Server, damit ich ihn nicht verbussele oder andersweitig nutze und ihn schnell finde wenn ich ihn brauche...... kein Plan überlebt den Feindkontakt.

Da sie mir davon nur mindestens 4 Stück verkaufen wollten habe ich mal die 8GB fassung bestellt.....Dienstag weiß ich mehr. Auf Holzklopf

Ist das er hier: https://www.amazon.de/Transcend-TS32GJF350-JetFlash-USB-Stick-schwarz/dp/B0063I1NJU/ref=sr_1_1?__mk_de_DE=ÅMÅŽÕÑ&crid=RT5Q7C88OET0&keywords=Transcend+32GB+USB+2.0&qid=1641730367&refinements=p_89%3ATranscend%2Cp_n_size_browse-bin%3A310552031&rnid=310547031&s=computers&sprefix=transcend+32gb+usb+2.0+%2Caps%2C86&sr=1-1 ?

Frohes Neues, ich betreibe einen unraid Server seit 2009 und habe mir damals ein Bundel mit zwei Keys gekauft. Einer wird genutzt und der zweite ist immer auf einem ersatzstick für den Fall der Fälle. Nun habe ich festgestellt das mein Reservestick gestorben ist.....kein problem...dache ich zumindestens. Ein neuen INTENSO Alu Line 8GB gekauft, gleiches Model wie den der noch läuft aber Pustekucken, der hat keine richtige GUID mehr 😞 Beim nächsten Wocheneinkauf einen MediaRange 32GB Stick aus einem Angebot mitgenommen und wieder nur eine dummy GUID. Hat jemand in letzter Zeit einen Stick gekauft der funktioinert? Eventuell mit Link? Danke f451

Hi, yesterday i updated my Unraid from 6.5 to the 6.8.3 because i need a driver for my zigbee stick....but with this update i broke my tvheadend installation. I notices the same problem @natiz reported: [ 19.600943] SMI PCIe driver 0000:04:00.0: DVB: registering adapter 0 frontend 0 (Montage Technology M88RS6000)... [ 19.609163] SMI PCIe driver 0000:04:00.0: DVBSky S952 V3 port 0 MAC: 00:18:42:54:55:52 [ 19.609440] dvbdev: DVB: registering new adapter (SMI_DVB) [ 19.861771] SMI PCIe driver 0000:04:00.0: DVB: registering adapter 1 frontend 0 (Montage Technology M88RS6000)... [ 19.869952] SMI PCIe driver 0000:04:00.0: DVBSky S952 V3 port 1 MAC: 00:18:32:54:55:53 [ 19.870219] Registered IR keymap rc-dvbsky [ 19.870493] rc rc0: IR (DVBSky S952 V3) as /devices/pci0000:00/0000:00:1c.0/0000:04:00.0/rc/rc0 [ 19.871525] input: IR (DVBSky S952 V3) as /devices/pci0000:00/0000:00:1c.0/0000:04:00.0/rc/rc0/input5 [ 1540.556607] m88ds3103 2-0069: Direct firmware load for dvb-demod-m88rs6000.fw failed with error -2 [ 1540.556609] m88ds3103 2-0069: firmware file 'dvb-demod-m88rs6000.fw' not found [ 1540.664806] SMI PCIe driver 0000:04:00.0: DVB: adapter 1 frontend 0 frequency 0 out of range (950000..2150000) [ 1540.702361] m88ds3103 2-0069: Direct firmware load for dvb-demod-m88rs6000.fw failed with error -2 [ 1540.702363] m88ds3103 2-0069: firmware file 'dvb-demod-m88rs6000.fw' not found The only hint for a solution i found was this: ...unfortunately i don't understand what exactly i need to do, can someone please it explain it in more details? Thanks I solved the Problem by using the Unraid_Custom_DVB_builtin_v6.8.3.zip that included the missing firmware. Thanks to @ich777 for that

Got it! Inside the Diagnostic i found the information at the super.dat. Many Thanks

Hello everyone, my unraid version is 6.5.3 with an uptime of more then 500 days....but now a disk died. That is not the first time, but now i run in the stupid problem that i don't know which disk is dead. My Unraid system has 21 Data disk, one Cache and one Parity...and i know that DISK 19 has status "Not Found". But i need the SN or Model to identity the right disk....sigh. Is there an old log or system information on the system were i can read out the last disk assigned to "Slot 19"??? Thanks

Adding an "--dns=8.8.8.8" to the Extra Parameter solved the "DNS resolution is currently unavailable" problem for me.

Hi, maybe someone with more skills was able to build a Ubuntu / Debian Docker with ffmpeg and the mymediaAlexa software from: https://www.mymediaalexa.com/#section-3 With this one it should be posible to play your local Music via a Skill direct on your Echo without the need to upload the files to the cloud...perfect for an Unraid Server. I read a few Docker instructions and tried over the last hours by my own....unfortunalty without any luck. :-(

Thanks, don’t tried that version because last change was 9 month ago...shit Lesson learned Many thanks for spending your time!

Hi, i want to run the iobroker (http://www.iobroker.net/docu/?lang=en/) as Doker on my Unraid server. Unfortunately i just found a few on Dokerhub but nothing special for unraid So i tried https://hub.docker.com/r/buanet/iobroker/ & https://hub.docker.com/r/athalis/iobroker/ I can install both without an error....but none of them is working....app starts and stops after a few seconds. Has anyone a working iobroker Doker and can share his configuration???? Thanks

Sorry guys but i need help....my wife will kill me, because i've killt the tvheadend installation. Because of an other problem i updated my unraid server and all the plugins and docker images....but now i the tvheadend server does'n work anymore. Can't connect vie web interface and the loging jsut say: [s6-init] making user provided files available at /var/run/s6/etc...exited 0.[s6-init] ensuring user provided files have correct perms...exited 0.[fix-attrs.d] applying ownership & permissions fixes...[fix-attrs.d] done.[cont-init.d] executing container initialization scripts...[cont-init.d] 10-adduser: executing...usermod: no changes-------------------------------------_ _ _| |___| (_) ___| / __| | |/ _ \| \__ \ | | (_) ||_|___/ |_|\___/|_|Brought to you by linuxserver.ioWe gratefully accept donations at:https://www.linuxserver.io/donations/-------------------------------------GID/UID-------------------------------------User uid: 99User gid: 100-------------------------------------[cont-init.d] 10-adduser: exited 0.[cont-init.d] 30-config: executing...[cont-init.d] 30-config: exited 0. UPDTAE:[cont-init.d] done.[services.d] starting services[services.d] done.2017-04-07 15:12:55.334 [ INFO] main: Log started2017-04-07 15:12:55.355 [ INFO] http: Starting HTTP server 0.0.0.0:99812017-04-07 15:12:55.358 [ INFO] htsp: Starting HTSP server 0.0.0.0:99822017-04-07 15:12:55.540 [ INFO] config: backup: migrating config from 4.1-2409~g4db3eec (running 4.1-2493~gb142383a7)2017-04-07 15:12:55.540 [ INFO] config: backup: running, output file /config/backup/4.1-2409~g4db3eec.tar.bz22017-04-07 15:12:55.540 [ INFO] spawn: Executing "/bin/tar" What can i do??? Update: Locks like the main reason was that i configure my rec folder under the config. So he tries to backup all the recordings..... i stopped the docker, delete the backupfile and moved the recordings to an other location. Now i got an endless loop of: 017-04-07 15:49:53.059 [ INFO] config: backup: running, output file /config/backup/4.1-2409~g4db3eec.tar.bz22017-04-07 15:49:53.059 [ INFO] spawn: Executing "/bin/tar"2017-04-07 15:50:08.627 [ INFO] config: backup: completed2017-04-07 15:50:08.633 [ ERROR] START: filename /config/channel/config/tag.tmp is invalid Update2: Got it :-) Delete the tag.tmp and a config.tmp file from the folder /config/channel/config Now i can connect....sorry for tha panic.....but i don't want to explain my wife why the tv doesnt work puhhhh.....weekend can start.

Hi, i have updated the Server and all Plugins/Docker....now i see all my folder. Very strange. Thanks for all the suggestions. By

Hi, this are the outputs from the commands : root@nas:~# ls -lah /mnt/user/Multimedia total 0 drwxrwxrwx 1 nobody users 144 Apr 4 03:57 ./ drwxrwxrwx 1 nobody users 176 Apr 5 03:40 ../ drwxrwxrwx 1 nobody users 72 Apr 4 08:56 Audio/ drwxrwxrwx 1 nobody users 48 Nov 17 03:40 Bilder/ drwxrwxrwx 1 nobody users 208 Apr 4 03:56 Filme/ drwxrwxrwx 1 nobody users 48 Apr 4 03:57 eBooks/ root@nas:~# ls -lah /mnt/user total 0 drwxrwxrwx 1 nobody users 176 Apr 5 03:40 ./ drwxr-xr-x 26 root root 520 Jan 29 22:16 ../ drwxrwxrwx 1 nobody users 160 Mar 19 12:33 .App/ drwxrwxrwx 1 nobody users 72 Apr 5 03:40 Data/ drwxrwxrwx 1 nobody users 144 Apr 4 03:57 Multimedia/ drwxrwxrwx 1 nobody users 320 Jan 29 22:16 appdata/ drwxrwxrwx 1 nobody users 72 Jan 13 19:01 domains/ drwxrwxrwx 1 nobody users 208 Jan 7 03:57 isos/ drwxrwxrwx 1 nobody users 72 Jan 14 03:40 system/ looks like everything is ok....stupid problem.

Hi Frank, unfortunately that was not the root cause..... i have also renamed the folder to remove german "umlaute" like öäü root@nas:~# ls -al /mnt/user/Multimedia/Audio total 1 drwxrwxrwx 1 nobody users 72 Apr 4 08:56 ./ drwxrwxrwx 1 nobody users 144 Apr 4 03:57 ../ drwxrwxrwx 1 nobody users 96 Apr 2 03:40 Hoerbuecher/ drwxrwxrwx 1 nobody users 672 Mar 20 03:40 Musik/ In folder "Hoerbuecher" i have 200 Folders and i pretty sure that no docker has written anything in this folder

Hi, I have a strange issue with my 6.3.0-rc6. I don't see all the files in one of my subfolders via SAMBA but i saw them direct on the server or with the Web Interface root@nas:/mnt/user/Multimedia/Audio/Hoerbuecher# testparm Load smb config files from /etc/samba/smb.conf WARNING: The "null passwords" option is deprecated WARNING: The "syslog" option is deprecated WARNING: The "syslog only" option is deprecated Can't find include file /boot/config/smb-extra.conf Processing section "[flash]" Processing section "[cache]" Processing section "[Data]" Processing section "[Multimedia]" Processing section "[appdata]" Processing section "[domains]" Processing section "[isos]" Loaded services file OK. WARNING: some services use vfs_fruit, others don't. Mounting them in conjunction on OS X clients results in undefined behaviour. Server role: ROLE_STANDALONE Press enter to see a dump of your service definitions # Global parameters [global] server string = Media server workgroup = PRIVAT os level = 100 preferred master = Yes syslog = 0 syslog only = Yes disable spoolss = Yes load printers = No printcap name = /dev/null show add printer wizard = No unix extensions = No map to guest = Bad User null passwords = Yes passdb backend = smbpasswd security = USER idmap config * : backend = tdb hide dot files = No map archive = No include = /etc/samba/smb-shares.conf wide links = Yes acl allow execute always = Yes create mask = 0777 directory mask = 0777 invalid users = root aio read size = 4096 aio write size = 4096 use sendfile = Yes [flash] ..... [Multimedia] path = /mnt/user/Multimedia ea support = Yes valid users = lan**** sa**** write list = lan**** sa** vfs objects = catia fruit streams_xattr fruit:encoding = native fruit:locking = none fruit:metadata = netatalk fruit:resource = file ...... I have stopped and restarted samba without any changes.... No Disks are excluded and all are included. Any advice for me?

Hi, first a happy new year to all of you It's time for my unraid server to switsch from the V 6.0 beta 3 to a new unraid version. I have not done this before, because the system runs without any problem for a very long time and i spend a lot of time to build and configer ~6 VM's running with xen. For the moment it looks like i can replace all this machines with Docker/Plugins...makes it easier for me My system runs with 20 Data, one Parity and one Cache drive, so my question is how can i switch the arry configuration to a new 6.3.0-rc6 system?? I ONLY need the array up and running without loosing data! I can configure the User/Shares/Networks etc again....not a big deal and i know that i must setup and configure all my application running on xen again as docker and plugin. Can i copy the super.dat to a new created USB Stick with the lates Unraid version (i have to licenses) and power on the server with the new stick??? Thanks for your help F451

Hi, i run an unraid 6 beta 3 Server with 18HD + parity and cache drive. Two weeks ago i run out of disk space but I dont noticed that...because of the cache drive. On the web interface i saw "0 B" free for ALL Data Disks. So i added a new drive and thought that was it.....unfortunately i saw today that i still have a lot of files on the cache drive that are not moved So i start the mover via webinterface and got messages like this for every file: Jun 25 14:08:43 nas logger: moving Data/ Jun 25 14:08:43 nas logger: ./Data/AVAYA Scann Dokumente/2014_06_17/IMG.jpg Jun 25 14:08:43 nas logger: .d..t...... ./ Jun 25 14:08:43 nas logger: .d..t...... Data/AVAYA Scann Dokumente/ Jun 25 14:08:43 nas logger: >f.stpog... Data/AVAYA Scann Dokumente/2014_06_17/IMG.jpg Jun 25 14:08:44 nas shfs/user0: shfs_write: write: (28) No space left on device Jun 25 14:08:44 nas shfs/user0: shfs_write: write: (28) No space left on device Jun 25 14:08:44 nas logger: rsync: write failed on "/mnt/user0/Data/AVAYA Scann Dokumente/2014_06_17/IMG.jpg": No space left on device (28) Jun 25 14:08:44 nas logger: rsync error: error in file IO (code 11) at receiver.c(389) [receiver=3.1.0] I found this file IMG.jpg on my drive8 with user root and group root. On the cache drive the file has my name as owner and "user" as group. Files i added AFTER i expand the Raid are moved fine! Any idea how to fix this? BTW: at time of this issue the "Min. free space:" for all shares was NOT set....must happened while i update Thanks Mirko

http://wsyntax.com/cs/killer-norco-case/

Hi, i need the X-Sendfile option enabled in lighttpd. .. fastcgi.server = ( ".php" => ( "localhost" => ( "socket" => "/var/run/lighttpd/php-fastcgi.socket", "allow-x-send-file" => "enable", "bin-path" => "/usr/bin/php-cgi" ) ) ) .. By changing the lighttpd.conf, stopping and starting the lighttpd it works...until the next boot. So i ask myself what is the best way to solve this. Do we have a build in function for doing this ?? Or must i add this steeps in to my go file?

Hi root@nas:~# smartctl -A /dev/sdh smartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 194 Temperature_Celsius 0x0022 044 050 000 Old_age Always - 44 (0 21 0 0) i got also the wrong (static) temperature. by

without -d ata i receive the same output, with -d scsi i only got a few lines with "Device does not support SMART" At the moment the only worse thing is that unraid alway display 44C°.... I'm not sure if i should send the case back or keep it. Thanks for your time! Greetings from Germany Mirko

Hi bubbaQ, i used unmenue. So the output for both comes from smartctl -a -d ata /dev/sdh Just wondering that the output for the Samsung HD looks ok. Is this more a incompatibility between WD Harddisk and the PM, or an software issue? (I asked that also Lian Li, but still no answer) And the most important question......has that an impact on my Data? hdparm for this HD /dev/sdh: ATA device, with non-removable media Model Number: WDC WD10EADS-65L5B1 Serial Number: WD-WCAU499250xx Firmware Revision: 0955 Standards: Supported: 7 6 5 4 Likely used: 7 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 1953525168 device size with M = 1024*1024: 953869 MBytes device size with M = 1000*1000: 1000204 MBytes (1000 GB) Capabilities: LBA, IORDY(can be disabled) Standby timer values: spec'd by Vendor, no device specific minimum R/W multiple sector transfer: Max = 1 Current = 1 Advanced power management level: disabled DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 udma6 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=240ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set Write cache Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd Advanced Power Management feature set SET_MAX security extension * 48-bit Address feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * WRITE_{DMA|MULTIPLE}_FUA_EXT * SATA-I signaling speed (1.5Gb/s) * SATA-II signaling speed (3.0Gb/s) * Software settings preservation Security: supported not enabled not locked frozen not expired: security count not supported: enhanced erase 508min for SECURITY ERASE UNIT. Checksum: correct Thanks, Mirko

Hi, after running out of space in my Server, i decide to buy a External Drive Case with Port Multiplier connection ( http://www.lian-li.com/v2/en/product/product06.php?pr_index=331&cl_index=12&sc_index=42&ss_index=115) Unraid recognize the two HDs i inserted (one WD, one Samsung) and add them to my Raid...that is the good thing. But i noticed that the output from Smartcrl for the WD was different then before. This is the output if the WD HD connected to an internal controller card: === START OF INFORMATION SECTION === Device Model: WDC WD10EADS-65L5B1 Serial Number: WD-WCAU499250xx Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Feb 28 16:09:28 2011 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x05) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (23400) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 161 159 021 Pre-fail Always - 6916 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1355 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 13242 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 83 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 29 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1355 194 Temperature_Celsius 0x0022 129 108 000 Old_age Always - 21 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. If i switch the HD to the EX-50 i got: === START OF INFORMATION SECTION === Device Model: WDC WD10EADS-65L5B1 Serial Number: WD-WCAU499250xx Firmware Version: 0955 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Feb 28 17:00:58 2011 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x00) Offline data collection not supported. SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented. Error logging capability: (0x00) Error logging NOT supported. No General Purpose Logging support. SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 194 Temperature_Celsius 0x0022 044 050 000 Old_age Always - 44 (0 21 0 0) Warning: device does not support Error Logging Error SMART Error Log Read failed: Input/output error Smartctl: SMART Error Log Read Failed Warning: device does not support Self Test Logging Error SMART Error Self-Test Log Read failed: Input/output error Smartctl: SMART Self Test Log Read Failed Device does not support Selective Self Tests/Logging I can write/read data to this disk, everything else looks normal. Also the second disk, SAMSUNG drive, send the right smartcrl output. (I test this also with a second WD drive -> same behavior) Need some advice, is this is a problem? Can i use the disk? Known issue? Seen this before? Thanks Mirko