ARMITAGEIII

well, finally i located and fixed the issue :

It was dirt in the internal conectors in the DaS enclosure , cleaned it with 99% isopropyl alcohol and its working 4 hours ongoing
hope it helps someone in the future¡¡


as you can see in the attached image ,all six drives are detected and working ,and not a single error in syslog

nostromo-diagnostics-20260321-2200.zip
here is a sample picture with the exact zone where the dirt was ,as an advice ,clean every single slot with alcohol, included sata ports/usb C and the board in both sides

FOUND IT thank you intel and microsoft... just 1 driver adjustment interrupt moderation i think is the english name ,turned it to OFF and it works flawless :) . Hope it will help someone in the future :)

windows 10 client:
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.1.5, port 33442
[ 5] local 192.168.1.2 port 5201 connected to 192.168.1.5 port 33448
[ ID] Interval Transfer Bandwidth
[ 5] 0.00-1.00 sec 1.05 GBytes 9.05 Gbits/sec
[ 5] 1.00-2.00 sec 1.10 GBytes 9.41 Gbits/sec
[ 5] 2.00-3.00 sec 1.10 GBytes 9.41 Gbits/sec
[ 5] 3.00-4.00 sec 1.09 GBytes 9.40 Gbits/sec
[ 5] 4.00-5.00 sec 1.09 GBytes 9.37 Gbits/sec
[ 5] 5.00-6.00 sec 1.09 GBytes 9.40 Gbits/sec
[ 5] 6.00-7.00 sec 1.09 GBytes 9.38 Gbits/sec
[ 5] 7.00-8.00 sec 1.08 GBytes 9.32 Gbits/sec
[ 5] 8.00-9.00 sec 1.09 GBytes 9.36 Gbits/sec
[ 5] 9.00-10.00 sec 1.09 GBytes 9.39 Gbits/sec
[ 5] 10.00-10.04 sec 42.7 MBytes 9.33 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth
[ 5] 0.00-10.04 sec 0.00 Bytes 0.00 bits/sec sender
[ 5] 0.00-10.04 sec 10.9 GBytes 9.35 Gbits/sec receiver

(server running ubuntu live usb) iperf3 -c 192.168.1.2
Connecting to host 192.168.1.2, port 5201
[ 5] local 192.168.1.5 port 52304 connected to 192.168.1.2 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 1.09 GBytes 9.40 Gbits/sec 0 462 KBytes
[ 5] 1.00-2.00 sec 1.09 GBytes 9.39 Gbits/sec 0 462 KBytes
[ 5] 2.00-3.00 sec 1.09 GBytes 9.39 Gbits/sec 0 462 KBytes
[ 5] 3.00-4.00 sec 1.10 GBytes 9.41 Gbits/sec 0 462 KBytes
[ 5] 4.00-5.00 sec 1.09 GBytes 9.39 Gbits/sec 0 462 KBytes
[ 5] 5.00-6.00 sec 1.09 GBytes 9.41 Gbits/sec 0 462 KBytes
[ 5] 6.00-7.00 sec 1.09 GBytes 9.40 Gbits/sec 0 462 KBytes
[ 5] 7.00-8.00 sec 1.10 GBytes 9.41 Gbits/sec 0 462 KBytes
[ 5] 8.00-9.00 sec 1.09 GBytes 9.40 Gbits/sec 0 462 KBytes
[ 5] 9.00-10.00 sec 1.10 GBytes 9.41 Gbits/sec 0 462 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 10.9 GBytes 9.40 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 10.9 GBytes 9.40 Gbits/sec receiver

As i though the problem is once again unraid , 3/3 its always a "hardware / machine / human" problem but hey this will be my third machine that i will move out of unraid ,so for me the problem is unraid with 0% doubt
 
ill save the license if someday this will be a real NaS OS 
 
reinstalled the usb and voila ,everything work ,dockers pools even the array xDDDDD tomorrow i will backup everything and run forever from unraid , 3/3 servers cant be a human or hardware problem...

to answer myself ,it seems a qbitorrent problem as stated in this post 
 my bad ,ill mark it as solved xDDDDD

seems like the last update have some problems ,i was copying data and im unable to reboot the machine ,not with the button or the console
if this trends continue i will need to seek other distro ,i need stability...