peter76
-
Posts
44 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by peter76
-
-
On 11/18/2020 at 11:15 PM, dlandon said:
I see this in the log:
Nov 16 13:14:06 unraid-server1 unassigned.devices: Mounting 'Auto Mount' Remote Shares... ... Nov 16 13:19:36 unraid-server1 unassigned.devices: Cannot 'Auto Mount' Remote Shares. Network not available!The startup check for the network to be available before auto mounting remote shares is taking over 5 minutes to determine the network is not available. There is an issue on the network available script that causes this lengthy time, and because it is in an Unraid startup event, the Unraid GUI will not be available until it completes the network check. I have a fix applied, but it is not released yet.
When you reboot Unraid, the GUI will eventually come up after the 5 minute delay caused by this issue.
hello, I'm having this issue now on Unraid 6.10.0-rc2 and UD 2022.01.02a.
After 5 Minutes WebUI is accessible.
-
Bug Report:
on Unraid 6.9.2 the Array doesn't start after replacing a (pre-attached) disk while preclear is running on another disk (I was waiting about 3 minutes).
Server was not shut down, only Array was stopped while preclear was running on a non-array-disk.
After stopping preclear (killing process via CLI) the array startet correctly and data-rebuild started correctly.
A manual restart of preclear also was successfull.
Solution suggestion:Unraid: Unraid should start the array even when a non-array disk is preclearing AND/OR
Preclear Plugin: should stop work, when array is stopped (or started) -
For me it's workin now - all Dockers are listed. Thank you for fixing!
-
I'm having an issue where some Docker Containers are not listed in "Docker Auto Update Settings" - looking at "nextcloud_mariadb" which I had to update manually:
=> Why is "nextcloud_mariadb" not available in the list of "Docker Auto Update Settings" in the Plugin ??
=> For me it seems to be a bug
-
I looks like I'm having the same bug - can't delete the "ugly" entrys:
-
hello JTok,
I'm wondering if it would be possible to add a function to split the resulting *.img.zst file into parts of lets say 4GB.
In my case I run an automated backup-job wih rsnapshot to a remote server build with multiple harddrives using mergerfs - and smaller *.img.zst files would help me fill up those harddrives.
(now I have to set a minfreespace=520G to handle those big *.img.zst files).
thanks a lot for your answer, peter76 -
I'm running a Windows VM with GPU passthrough without monitor connected.
RDP runs fine for most purposes.
But there are situations where RDP does not work - i.e. some bigger Windows Updates require multiple reboots, the only way I got them runnig was using VNC.
Now I have following problem: Activting VNC and GPU passthrough results in an Error in Windows Hardware-Manager (Code 12 - not enough resources...).So my passthrough-GPU does not run, when VNC is activated.
How can I run both?? -
thanks a lot to dlandon, you brought me on the right path to search.
A few days ago, I did some changes on my firewall, and now pinging the gateway was not possible any more.
I solved the problem by allowing pinging the gateway.
Just one thing to think about:
Unraid GUI (without UD Plugin) starts without beeing able to ping the Gateway.
When installing UD Plugin AND pinging the Gateway is not possible, user gets problems (as I got..).
In my "dummy user"-opinion pinging the Gateway is maybe not the best solution for checking the network. -
I can ping the Unraid server that is trying to mount the remote shares.
-
I have a problem since last Plugin Update to 2021.04.03 on Unraid 6.9.1:
Unassigned devices gets a timeout when starting the Unraid-Server, Server LOG:
Apr 5 17:35:40 Ryzen7-5800X unassigned.devices: Mounting 'Auto Mount' Remote Shares...Apr 5 17:41:10 Ryzen7-5800X unassigned.devices: Cannot 'Auto Mount' Remote Shares. Network not available!
Pinging the Server is possible the whole time, and Unraid GUI is not reachable.
After this 5min 30sec the Unraid GUI is reachable, and I can manually (by hitting MOUNT-Button) mount my SMB Shares.
For testing I deleted my all my SMB Shares:
Same Timeout-Behaviour when rebooting Server. -
On 3/9/2021 at 4:26 PM, peter76 said:
I get the same error when installing VM BACKUP - on Unraid 6.9 and now on 6.9.1
now with VM BACKUP 2021.03.11 the installation runs smooth 🙂 THANK YOU
-
15 minutes ago, JTok said:
@CS01-HS Your issue can be fixed by going to the Danger Zone tab and setting "Disable restrictive validation" to "Yes"
@peter76 your issue can be fixed by going to the Danger Zone tab and setting "Disable custom cron validation" to "Yes"
Additional Information:
@CS01-HS There are limits in place to prevent people from choosing values that could be dangerous without making sure they understand them. Also, if you only need 1 backup, why not just use "Number of Backups to Keep" and set it to 1 instead of using "number of days to keep backups"?
@peter76 With cron it is very complicated to validate all possible options, so I went with something that would cover most scenarios while leaving the disable switch to allow for more complex ones like yours.THANX JTOK - now I can run ... */3 ...
PS: it's only "Disable custom cron validation?" which has to be set to YES -
Bug report:
in "settings" => "custom cron" it's not possible to enter "/" symbol.
=> possible to enter i.e.: "0 3 1 3,9 *" (run at 3:00h 1.3. and 1.9.)
=> not possible to enter i.e.: "0 3 1 */2 *" (run at 3:00h every second month)
-
17 hours ago, hugenbdd said:
This is expected behavior.
Just for clarity. When hitting the button, mover will run, however, the cache threshold may not be met, so it doesn't move anything and "skips" the custom mover command. (Check the logs to see the statements)
I will look at putting a new button in, that calls the original mover. (This would not look at any of the config settings.)
A Button to start mover - independent of Mover Tuning restrictions - would be a very nice feature.
great work hugenbdd, thanx for it 🙂
-
46 minutes ago, hugenbdd said:
New Release
Allows for the custom mover to be invoked if the cache threshold ONLY is set in the config.
Tested and works fine for me.
Thanx a lot!
Different behavior to older versions:
Now it's not possible to start mover via button, if percentage not reached.
-
1 hour ago, hugenbdd said:
That's good.
Appears that it's not reading your config file for the mover for some reason.
Config file location: /boot/config/plugins/ca.mover.tuning/ca.mover.tuning.cfg
please cat that file for me. Should look something like this.
root@Tower:/boot/config/plugins/ca.mover.tuning# cat /boot/config/plugins/ca.mover.tuning/ca.mover.tuning.cfg
moverDisabled="no"
moverNice="0"
moverIO="-c 2 -n 0"
threshold="55"
age="yes"
sizef="no"
sizeinM="1"
sparsnessf="no"
sparsnessv="1"
filelistf="no"
filelistv=""
filetypesf="no"
filetypesv=""
parity="yes"
enableTurbo="no"
logging="no"
force="no"
cron=""
forceParity="yes"
daysold="30"
And just incase it's a permissions issue, here is how mine looks.
-rw------- 1 root root 283 Mar 7 13:39 ca.mover.tuning.cfg
Maybe try and change something in your config. Say threshold of 75% to 70%, then hit apply, and also change the "time" that mover runs and hit apply.
my Permissions look the same, and .cfg file looks okay for me:
root@Tower:~# ls /boot/config/plugins/ca.mover.tuning/ca.mover.tuning.cfg -lisah
5360 4.0K -rw------- 1 root root 281 Mar 7 21:30 /boot/config/plugins/ca.mover.tuning/ca.mover.tuning.cfg
root@Tower:~# cat /boot/config/plugins/ca.mover.tuning/ca.mover.tuning.cfg
moverDisabled="no"
moverNice="0"
moverIO="-c 2 -n 0"
threshold="75"
age="no"
daysold="1"
sizef="no"
sizeinM="1"
sparsnessf="no"
sparsnessv="1"
filelistf="no"
filelistv=""
filetypesf="no"
filetypesv=""
parity="no"
enableTurbo="yes"
logging="no"
force="no"
cron=""
forceParity="yes"
Tried to change some settings and pressed APPLY ==> Mover still runs without recognizing percentage-threshold.
Your IF-Statement seems to be the reason for this Issue. I will wait for your update.
The one open question for me is: why do I have this issue since update to Unraid 6.9 ...
-
4 hours ago, hugenbdd said:
Can you run these two commands from the console?
ls -ltr /usr/local/emhttp/plugins/ca.mover.tuning/
cat /usr/local/sbin/mover
done. here the results:
-
9 minutes ago, hugenbdd said:
Can you post your logs and scheduler settings?
By design, it will start based on the scheduler, it just uses the setting to determine if anything moves.
these are my settings and full diagnostic-file
-
On 3/6/2021 at 12:18 PM, malac said:
now i get the following error and vmbackup is gone
+==============================================================================
| Installing new package /boot/config/plugins/vmbackup/vmbackup-v0.2.2-2021.02.03.txz
+==============================================================================
Verifying package vmbackup-v0.2.2-2021.02.03.txz.
Installing package vmbackup-v0.2.2-2021.02.03.txz:
PACKAGE DESCRIPTION:
Package vmbackup-v0.2.2-2021.02.03.txz installed.
plugin: run failed: /bin/bash retval: 126
Updating Support LinksI get the same error when installing VM BACKUP - on Unraid 6.9 and now on 6.9.1
-
I'm having the same issue since update to 6.9 (and now on 6.9.1).
On Unraid Version 6.8 the Mover Tuning was working well (with threshold set to 75% ), now Mover starts every hour independent of threshold reached or not.
-
today I installed Unraid Version: 6.9.0-beta35 and I can tell you:
my USB-2,5GBit NIC with RTL8156 Chipset is running now.
Speedtest: Win-VM copy over network at 260MB/s - seems to be running on fullspeed 🙂
** yeah **-
1
-
-
thanx for analyzing!!
YES - the same USB-NIC works prober in a Win10-VM.
What can I do? Wait for a better driver?? -
here are my diagostics.
- USB-NIC is regognized in TOOLS - SYSTEM DEVICES
- USB-NIC is not available in SETTINGS - NETWORK SETTINGS (the only NIC listed is the Onboard-NIC)
-
I'm also waiting for Unraid-Support for USB-2,5GBit NIC with RTL8156 Chipset.
My Server runs at 10GBit, and I would love to connect my 3-VM-Workstation using this USB-NIC, since all PCIe Slots are occupied by 3xGPU, 2xUSB, 1xSAT 🙂
Tried 6.9.0-beta29 - no luck, RTL8156 is still not recognized...
Share max size
in Feature Requests
Posted
Limiting a Share size should be a basic feature on a Data Server.
please!! make this (simple) feature available asap