Shinobi Posted January 16, 2021 Share Posted January 16, 2021 (edited) I was wondering what would happen if I remove and reconnect the SATA signal cable from one SATA connector to another ? For example, moving the cable which was originally connected to port SATA6G_1, to SATA6G_6, SATA6G_5, to SATA6G_2 Would Unraid get confused after the next power up ? or does Unraid track the disks with their serial number or so & the port or controller where the disks connect do not matter ? Edited January 16, 2021 by Shinobi Quote Link to comment
ChatNoir Posted January 16, 2021 Share Posted January 16, 2021 6 minutes ago, Shinobi said: does Unraid track the disks with their serial number Yes. You should be OK unless you are using a RAID card. (it seems it is not your case) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.