tmor2 Posted February 23, 2021 Share Posted February 23, 2021 (edited) I recently unplugged USB cable from external HDD being mounted to UNRAID server via "Unassigned Devices". After I reattached the drive, the drive won't mount correctly. Attached pics show how this looks along with logs. Specific error message states: "Tower unassigned.devices: Mount of '/dev/sdh2' failed. Error message: FUSE exfat 1.3.0 WARN: volume was not unmounted cleanly. fuse: mountpoint is not empty fuse: if you are sure this is safe, use the 'nonempty' mount option" I note recommendation to run "fsck" command. https://wiki.unraid.net/Check_Disk_Filesystems does not show how this command is used for exFAT formatted systems. Assuming that I'm using UNRAID terminal, what is the syntax for "fsck" command. I'd like to make sure that fsck is only run against that specific drive (and not my array drives), and I'd also appreciate to know where in directory structure within UNRAID terminal window do I need to be positioned when executing fsck cmmand. Namely, in UNRAID terminal this drive has following directory aisgnments: /dev/sdh and /mnt/disks/ Do I need to unmount the drive, then navigate to /dev/ and execute fsck against sdh? Suggestions? Edited February 23, 2021 by tmor2 Quote Link to comment
dlandon Posted February 23, 2021 Share Posted February 23, 2021 7 minutes ago, tmor2 said: I recently unplugged USB cable from external HDD being mounted to UNRAID server via "Unassigned Devices". After I reattached the drive, the drive won't mount correctly. Attached pics show how this looks along with logs. Specific error message states: "Tower unassigned.devices: Mount of '/dev/sdh2' failed. Error message: FUSE exfat 1.3.0 WARN: volume was not unmounted cleanly. fuse: mountpoint is not empty fuse: if you are sure this is safe, use the 'nonempty' mount option" I note recommendation to run "fsck" command. https://wiki.unraid.net/Check_Disk_Filesystems does not show how this command is used for exFAT formatted systems. Assuming that I'm using UNRAID terminal, what is the syntax for "fsck" command. I'd like to make sure that fsck is only run against that specific drive (and not my array drives), and I'd also appreciate to know where in directory structure within UNRAID terminal window do I need to be positioned when executing fsck cmmand. Suggestions? Reboot. Quote Link to comment
tmor2 Posted February 23, 2021 Author Share Posted February 23, 2021 5 minutes ago, dlandon said: Reboot. Thank you. simple solution. Quote Link to comment
dlandon Posted February 23, 2021 Share Posted February 23, 2021 2 minutes ago, tmor2 said: Thank you. simple solution. You can clean it up manually, but reboot is the easiest way. Quote Link to comment
Neldonado Posted September 25, 2022 Share Posted September 25, 2022 I know this is a pretty old thread, but I have run into the same issue. I rebooted, and was able to mount my drive, however when I go to unmount it and mount it again later I get the same error. Is there a better fix from this happening? Sep 24 20:43:46 Skynet unassigned.devices: Mount of 'sda1' failed: 'fuse: mountpoint is not empty fuse: if you are sure this is safe, use the 'nonempty' mount option FUSE exfat 1.3.0 ' Sep 24 20:43:46 Skynet unassigned.devices: PHP Warning: rmdir(/mnt/disks/133009479092): Directory not empty in /usr/local/emhttp/plugins/unassigned.devices/include/lib.php on line 1375 Sep 24 20:43:46 Skynet unassigned.devices: Partition '133009479092' cannot be mounted. Quote Link to comment
dlandon Posted September 25, 2022 Share Posted September 25, 2022 6 hours ago, Neldonado said: I know this is a pretty old thread, but I have run into the same issue. I rebooted, and was able to mount my drive, however when I go to unmount it and mount it again later I get the same error. Is there a better fix from this happening? Sep 24 20:43:46 Skynet unassigned.devices: Mount of 'sda1' failed: 'fuse: mountpoint is not empty fuse: if you are sure this is safe, use the 'nonempty' mount option FUSE exfat 1.3.0 ' Sep 24 20:43:46 Skynet unassigned.devices: PHP Warning: rmdir(/mnt/disks/133009479092): Directory not empty in /usr/local/emhttp/plugins/unassigned.devices/include/lib.php on line 1375 Sep 24 20:43:46 Skynet unassigned.devices: Partition '133009479092' cannot be mounted. Post diagnostics. Quote Link to comment
Neldonado Posted September 25, 2022 Share Posted September 25, 2022 Here are my diagnostics! skynet-diagnostics-20220925-0853.zip Quote Link to comment
dlandon Posted September 25, 2022 Share Posted September 25, 2022 7 hours ago, Neldonado said: Here are my diagnostics! skynet-diagnostics-20220925-0853.zip 171.47 kB · 1 download I think you have a misconfigured docker container writing something at /mnt/disks/133009479092 when the disk is not mounted. Set docker containers to not auto start and reboot. Mount and unmount the disk in question, then mount and unmount it again. See if the error persists. FCP is also warning about several things you need to fix: Sep 24 10:44:05 Skynet root: Fix Common Problems: Warning: preclear.disk.plg Not Compatible with Unraid version 6.9.2 Sep 24 10:44:09 Skynet root: Fix Common Problems: Warning: Share appdata set to use pool skynetcache, but files / folders exist on the hddcache pool Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.