Stiibun Posted March 8, 2021 Share Posted March 8, 2021 Bought a Fujitsi network card (Fujitsu Siemens D3045-A11 GS 1 Quad Port Full Profile) which has a Intel® I350-AM4 Gigabit Ethernet Controller and installed it in the PCIEX4 slot on my Gigabyte H370M D3H GSM motherboard but somehow this card isn't showing up in my IOMMU groups. When I plug in a cable into one of the ports into my switch it does recognise it, meaning the led light up. So not sure what I'm missing here. It should work I guess when I put that card into the PCIEX4 slot of my Gigabyte mojo, correct? Attached diagnostics below firefly-diagnostics-20210308-1530.zip Quote Link to comment
JorgeB Posted March 8, 2021 Share Posted March 8, 2021 Try in a different slot if available, until it's detected in the devices it will never work, you can also try it in a different PC just to make sure it's working. Quote Link to comment
Stiibun Posted March 8, 2021 Author Share Posted March 8, 2021 OK I'll try that, but unfortunately I don't have any PC's here where I can try it in. But have one other slot on the Gigabyte mobo which I can try. Quote Link to comment
Stiibun Posted March 9, 2021 Author Share Posted March 9, 2021 Unfortunately putting that card in another slot still doesn't get it to be recognised. Will try to hunt someone down with a PC where I can try this card in. When I hook up one of the ports to a switch it also only gets a 10 FDX (10 Mbps) connection instead of 1000 FDX (1 Gbps). But then again that port doesn't get an IP address which seems logical as it's not loaded on my unRAID server. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.