xtrips Posted March 20, 2021 Share Posted March 20, 2021 Hello, That's the second time I run parity check and get around 20000+ errors while none of the disks show any errors. What errors are they? Where do I find and correct them? novanas2-syslog-20210320-1017.zip Quote Link to comment
JorgeB Posted March 20, 2021 Share Posted March 20, 2021 That was a non correcting check, run a correcting check, it should find but this time correct all the same errors, then you can run a non correcting one to confirm all is well. Quote Link to comment
xtrips Posted March 20, 2021 Author Share Posted March 20, 2021 2 minutes ago, JorgeB said: That was a non correcting check, run a correcting check, it should find but this time correct all the same errors, then you can run a non correcting one to confirm all is well. The checkbox "Write corrections to Parity" is always checked on the Main page. But these last 2 parity check that ran ran because of "ungraceful shutdowns" so I did not started them myself (and that is weird because in fact I only chose to reboot). So you think that these self started parity check ran without the "Write corrections to Parity" activated? Quote Link to comment
JorgeB Posted March 20, 2021 Share Posted March 20, 2021 Auto parity check after an unclean shutdown is always non correct. Quote Link to comment
xtrips Posted March 20, 2021 Author Share Posted March 20, 2021 Auto parity check after an unclean shutdown is always non correct.7 years with Unraid and I never knew that. ThanksSent from my iPhone using Tapatalk Pro Quote Link to comment
JorgeB Posted March 20, 2021 Share Posted March 20, 2021 7 years It wasn't always like that, but it has been since about 3 or 4 years ago. Quote Link to comment
xtrips Posted March 21, 2021 Author Share Posted March 21, 2021 (edited) 19 hours ago, JorgeB said: Auto parity check after an unclean shutdown is always non correct. So right after your answer I started a Parity check manually with correction. And a day later I get this exact same result with 20500 errors. I am concerned because I have 2 X 4Tb parity disks and I don't know what will happen if I lose a disk, will I be protected? Even when I run the Extended Fix Common Problems plugin it ends with a Found Errors notification, but no errors appear on screen to be corrected. novanas2-syslog-20210321-0731.zip Edited March 21, 2021 by xtrips Quote Link to comment
JorgeB Posted March 21, 2021 Share Posted March 21, 2021 22 hours ago, JorgeB said: a correcting check, it should find but this time correct all the same errors, then you can run a non correcting one to confirm all is well. Quote Link to comment
xtrips Posted March 21, 2021 Author Share Posted March 21, 2021 11 minutes ago, JorgeB said: Jorge this is unclear to me. In 4 days I had 3 parity checks that ran. 2 unrequested and one actionned manually. All of them finished with around 20500 errors. Those errors are not detailed. Isn't there more information in the syslog about that? Is there a debug mode? I would like to be reassured that I have parity on my server. Quote Link to comment
JorgeB Posted March 21, 2021 Share Posted March 21, 2021 Only the last one was a correcting check, so it's expected to find exactly the same errors, next one should find 0 errors. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.