DuzAwe Posted March 27, 2021 Share Posted March 27, 2021 Howdy, New ECC ram installed after my last two issues. Woke up this morning to more errors. Looks like the first error was just cache then loop2 later? thelibrary-diagnostics-20210327-0921.zip Quote Link to comment
JorgeB Posted March 27, 2021 Share Posted March 27, 2021 1 hour ago, DuzAwe said: Looks like the first error was just cache then loop2 later? Correct, cache filesystem corrupted first, then it's normal to cause issues with any images using it. Quote Link to comment
DuzAwe Posted March 27, 2021 Author Share Posted March 27, 2021 A reboot seems to have put everything back to normal? Scrub came back with nothing. Should a reboot have done that? Quote Link to comment
JorgeB Posted March 27, 2021 Share Posted March 27, 2021 Sometimes rebooting can temporarily help, but you'll likely run into issues again. Quote Link to comment
DuzAwe Posted March 27, 2021 Author Share Posted March 27, 2021 Anything in the logs to point at what it is? The disk have run fine for months the rc for 6.9 is when this stuff started. Quote Link to comment
JorgeB Posted March 27, 2021 Share Posted March 27, 2021 3 minutes ago, DuzAwe said: Scrub came back with nothing. Also, a scrub only checks data and metadata consistency, it doesn't look for filesystem corruption you can do that with the pool offline by typing: btrfs check /dev/sdX1 Note that if errors are found running btrfs check in repair model (btrfs check --repair) is considered dangerous, should only be done if told so. Quote Link to comment
JorgeB Posted March 27, 2021 Share Posted March 27, 2021 2 minutes ago, DuzAwe said: Anything in the logs to point at what it is? Not that I can see, only that corruption was detected. Quote Link to comment
DuzAwe Posted March 27, 2021 Author Share Posted March 27, 2021 1 minute ago, JorgeB said: Also, a scrub only checks data and metadata consistency, it doesn't look for filesystem corruption you can do that with the pool offline by typing: btrfs check /dev/sdX1 Note that if errors are found running btrfs check in repair model (btrfs check --repair) is considered dangerous, should only be done if told so. Comes back with: root@thelibrary:~# btrfs check /dev/sdX1 Opening filesystem to check... ERROR: mount check: cannot open /dev/sdX1: No such file or directory ERROR: could not check mount status: No such file or directory Quote Link to comment
itimpi Posted March 27, 2021 Share Posted March 27, 2021 2 minutes ago, DuzAwe said: Comes back with: root@thelibrary:~# btrfs check /dev/sdX1 Opening filesystem to check... ERROR: mount check: cannot open /dev/sdX1: No such file or directory ERROR: could not check mount status: No such file or directory You have to replace 'X' with the correct letter for the drive as shown in the unPaid GUI. 1 Quote Link to comment
JorgeB Posted March 27, 2021 Share Posted March 27, 2021 You need to replace X with correct letter, and since it's an NVMe device it would be: btrfs check /dev/nvme1n1p1 1 Quote Link to comment
DuzAwe Posted March 27, 2021 Author Share Posted March 27, 2021 Well I feel like a fool. Ok Looks clean. Opening filesystem to check... Checking filesystem on /dev/nvme1n1p1 UUID: cdb12f2a-8005-48a1-b8f7-bd0e1fc9fd43 [1/7] checking root items [2/7] checking extents [3/7] checking free space tree [4/7] checking fs roots [5/7] checking only csums items (without verifying data) [6/7] checking root refs [7/7] checking quota groups skipped (not enabled on this FS) found 266705154048 bytes used, no error found total csum bytes: 225909672 total tree bytes: 698073088 total fs tree bytes: 379420672 total extent tree bytes: 46546944 btree space waste bytes: 119030509 file data blocks allocated: 2601829400576 referenced 262717333504 Quote Link to comment
JorgeB Posted March 27, 2021 Share Posted March 27, 2021 That looks all fine to me. Quote Link to comment
DuzAwe Posted March 27, 2021 Author Share Posted March 27, 2021 Welp, Thanks for your help again. I guess Ill be back at some point. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.