kabloomy Posted April 14, 2021 Share Posted April 14, 2021 (edited) I have two disks in my array and my data disk has been disabled with a red X. I did also receive a notification that both drives (data and parity) have read failures (diagnostics-20210415). A few days ago, I've had a similar issue with just the data disk getting write failures and being disabled (diagnostics-20210413). I rebuilt that disk from parity and a couple days later the above issue happened with two disks. Now, I've also had problems in the past with the cache drive being unmountable and either I had to restore from backups, or managed to successfully run xfs_repair. For that reason, I suspect a fault with my SATA controller. Can the smart people of the forums confirm this with diagnostics attached or have any other ideas of the possible causes? sushi-diagnostics-20210415-0858.zip sushi-diagnostics-20210413-1903.zip Edited April 16, 2021 by kabloomy Marked as solved Quote Link to comment
JorgeB Posted April 15, 2021 Share Posted April 15, 2021 Looks like a power/connection problem, I believe that Microserver uses a fan-out cable for the disks, that would be the first thing to check. 1 Quote Link to comment
kabloomy Posted April 16, 2021 Author Share Posted April 16, 2021 Thanks, I did some googling and I found someone similar issues and their conclusion was power also. I do have a 2-way Molex power splitter splitting the SATA fan-out power with a fan controller from Aliexpress. So it could be either of those causing issues. I've disconnected the fan controller for now and will monitor for further problems. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.