dgooglr Posted June 6, 2021 Share Posted June 6, 2021 Hi, Im running parity checks once every 1 month as it takes a long time and is causing my system to be slow. Today I see that one of the drives is getting errors: Should I be prepared to replace it, or is there something I can do about it? https://imgur.com/a/HbB6VBK Quote Link to comment
Squid Posted June 6, 2021 Share Posted June 6, 2021 Without diagnostics, it's impossible to say. Quote Link to comment
dgooglr Posted June 6, 2021 Author Share Posted June 6, 2021 Do I upload the whole zip folder from diagnostics? Quote Link to comment
dgooglr Posted June 6, 2021 Author Share Posted June 6, 2021 Never done this before, but hopefully this is the proper way to do it. unraidnas-diagnostics-20210606-2218.zip Quote Link to comment
Squid Posted June 6, 2021 Share Posted June 6, 2021 Cabling looks bad on disk 3. Reseat / replace. Might not solve the inconsistency between parity / data drives though, and you'd have to write the corrections to the parity drive. Quote Link to comment
dgooglr Posted June 6, 2021 Author Share Posted June 6, 2021 Ok, thanks I will try that. I have my worries as this is a drive from an external hdd that I put into my unraid server. I guess they are not as good as a 3.5" drive. I do have write to parity enabled, but I will run the parity check once more just in case that solves anything. Thanks for your help! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.