m0ngr31 Posted July 12, 2021 Share Posted July 12, 2021 I'm running into a strange issue I haven't seen before. I added a few unassigned drives and one of my other ones just disapeared after a reboot and won't show up anymore. It was showing up fine before, and even still shows under SCSI devices. [7:0:7:0] disk ATA ST2000LX001-1RG1 SDM1 /dev/sdk - I get this error in the syslog: Jul 11 21:14:26 Gunhaver emhttpd: device /dev/sdk problem getting id Jul 11 21:14:26 Gunhaver emhttpd: device /dev/sdk problem getting id It seems like it was working until I deleted the partition on it using the tool from Unassigned Devices... gunhaver-diagnostics-20210711-2125.zip Quote Link to comment
JorgeB Posted July 12, 2021 Share Posted July 12, 2021 That disk is failing to initialize: Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: Power-on or device reset occurred Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: Device offlined - not ready after error recovery Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: rejecting I/O to offline device Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] Read Capacity(16) failed: Result: hostbyte=0x01 driverbyte=0x00 Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] Sense not available. Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00 Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] Sense not available. Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] 0 512-byte logical blocks: (0 B/0 B) Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] 0-byte physical blocks Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] Write Protect is off Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] Mode Sense: 00 00 00 00 Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] Asking for cache data failed Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] Assuming drive cache: write through Jul 11 20:54:30 Gunhaver kernel: sd 7:0:7:0: [sdk] Attached SCSI disk Try connecting it to the onboard SATA controller instead. Quote Link to comment
m0ngr31 Posted July 12, 2021 Author Share Posted July 12, 2021 Okay, I'll try that Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.