Neldonado Posted July 31, 2021 Share Posted July 31, 2021 (edited) 8/2/21 update: I am still not sure why my disk is disabled, I suspect some read/ write errors but am not 100% sure. What I am doing however is using unbalance to move everything off of my disabled, emulated disk, and then plan to "shrink" my array without that emulated disk. This isn't ideal but I don't really have any other option at this point. Once that is finished and everything is running I am going to see if I can add the drives back in. Will update after that. I had an issue with filesystem corruption and the disk being unmountable, and thought I needed to replace the disk. I put a new disk in and then realized I needed to repair the xfs filsystem. I did that following this video: https://www.youtube.com/watch?v=JVjB0ROdLBA3) started array 4) stopped array 5) added drive back in array (showed as new disk) 6) started array When the array started I went to the main page and the disk was still disabled and the array was not rebuilding from parity. I have attached the diagnostics and smart test for the disabled drive. Thanks in advance! skynet-diagnostics-20210731-0847.zip skynet-smart-20210731-0846.zip Edited August 2, 2021 by Neldonado update plan Quote Link to comment
Squid Posted July 31, 2021 Share Posted July 31, 2021 2 hours ago, Neldonado said: (showed as new disk) Showed as NEW DISK? Did you add it back to the same slot or to a new slot? Quote Link to comment
Neldonado Posted July 31, 2021 Author Share Posted July 31, 2021 10 minutes ago, Squid said: Showed as NEW DISK? Did you add it back to the same slot or to a new slot? I added it back to the same slot. Quote Link to comment
Squid Posted July 31, 2021 Share Posted July 31, 2021 It started rebuilding, then immediately disabled. Looks like connection problems. Quote Link to comment
Neldonado Posted July 31, 2021 Author Share Posted July 31, 2021 3 minutes ago, Squid said: It started rebuilding, then immediately disabled. Looks like connection problems. I have moved the cables to different drives and they connect fine. This was my sys log after starting the array. https://paste.ubuntu.com/p/2wRZH3pMZN/ Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.