coronicus Posted August 19, 2021 Share Posted August 19, 2021 new to unraid so im still trying to understand errors in logs.. i have run preclear 3 times now (dif cables dif controlers) on this drive with similar error logs so im going to assume this drive is bad. I purchased this drive from amazon and i guess i just want to verification that it is bad and why. im assuming it cause the zero out of drive went ok but the read of the zeroed out drive failed?? am i on the right track? Thanks coro Aug 19 04:30:39 preclear_disk_MK0371YHKYJYNA_17205: Post-Read: dd output: dd: error reading '/dev/sdg': Input/output error Aug 19 04:30:39 preclear_disk_MK0371YHKYJYNA_17205: Post-Read: dd output: 360660+1 records in Aug 19 04:30:39 preclear_disk_MK0371YHKYJYNA_17205: Post-Read: dd output: 360660+1 records out Aug 19 04:30:39 preclear_disk_MK0371YHKYJYNA_17205: Post-Read: dd output: 756360646656 bytes (756 GB, 704 GiB) copied, 4953.73 s, 153 MB/s Aug 19 04:30:39 preclear_disk_MK0371YHKYJYNA_17205: Post-Read: post-read verification failed! Aug 19 04:30:42 preclear_disk_MK0371YHKYJYNA_17205: S.M.A.R.T.: Error: Aug 19 04:30:42 preclear_disk_MK0371YHKYJYNA_17205: S.M.A.R.T.: Aug 19 04:30:42 preclear_disk_MK0371YHKYJYNA_17205: S.M.A.R.T.: ATTRIBUTE INITIAL NOW STATUS Aug 19 04:30:42 preclear_disk_MK0371YHKYJYNA_17205: S.M.A.R.T.: Reallocated_Sector_Ct 3 3 -Aug 19 04:30:42 preclear_disk_MK0371YHKYJYNA_17205: S.M.A.R.T.: Power_On_Hours 27 35 Up 8 Aug 19 04:30:42 preclear_disk_MK0371YHKYJYNA_17205: S.M.A.R.T.: Temperature_Celsius 32 32 -Aug 19 04:30:42 preclear_disk_MK0371YHKYJYNA_17205: S.M.A.R.T.: Reallocated_Event_Count 3 3 -Aug 19 04:30:42 preclear_disk_MK0371YHKYJYNA_17205: S.M.A.R.T.: Current_Pending_Sector 0 1 Up 1 Aug 19 04:30:42 preclear_disk_MK0371YHKYJYNA_17205: S.M.A.R.T.: Offline_Uncorrectable 0 0 -Aug 19 04:30:42 preclear_disk_MK0371YHKYJYNA_17205: S.M.A.R.T.: UDMA_CRC_Error_Count 0 0 -Aug 19 04:30:42 preclear_disk_MK0371YHKYJYNA_17205: S.M.A.R.T.: SMART overall-health self-assessment test result: PASSED Aug 19 04:30:43 preclear_disk_MK0371YHKYJYNA_17205: error encountered, exiting... Quote Link to comment
JorgeB Posted August 19, 2021 Share Posted August 19, 2021 9 minutes ago, coronicus said: so im going to assume this drive is bad. Looks like it is, an extended SMART test will confirm. Quote Link to comment
coronicus Posted August 19, 2021 Author Share Posted August 19, 2021 10 minutes ago, JorgeB said: Looks like it is, an extended SMART test will confirm. well didn't know about the extended smart test in unraid, ty for pointing that out, running it now.. At this point I just want to prove its bad and get a new drive. Quote Link to comment
coronicus Posted August 19, 2021 Author Share Posted August 19, 2021 ok the test completed with errors.. so what should i tell the seller that im getting smart errors? is that enuff info.. Last SMART test result: Errors occurred - Check SMART report ATA Error Count: 10 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 10 occurred at disk power-on lifetime: 35 hours (1 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 02 ce 5d 0d 08 Error: UNC at LBA = 0x080d5dce = 135093710 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 08 88 c8 5d 0d 40 00 08:14:32.663 READ FPDMA QUEUED ef 10 02 00 00 00 a0 00 08:14:32.661 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 e0 00 08:14:32.661 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 00 08:14:32.660 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 08:14:32.660 SET FEATURES [Set transfer mode] Error 9 occurred at disk power-on lifetime: 35 hours (1 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 02 ce 5d 0d 08 Error: UNC at LBA = 0x080d5dce = 135093710 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 08 40 c8 5d 0d 40 00 08:14:29.344 READ FPDMA QUEUED 60 08 38 c0 5d 0d 40 00 08:14:29.344 READ FPDMA QUEUED 60 08 30 b8 5d 0d 40 00 08:14:29.344 READ FPDMA QUEUED 60 08 28 b0 5d 0d 40 00 08:14:29.344 READ FPDMA QUEUED 60 08 20 a8 5d 0d 40 00 08:14:29.344 READ FPDMA QUEUED Error 8 occurred at disk power-on lifetime: 35 hours (1 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 72 ce 5d 0d 08 Error: UNC at LBA = 0x080d5dce = 135093710 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 c0 d0 40 5f 0d 40 00 08:14:25.902 READ FPDMA QUEUED 60 40 c8 00 5a 0d 40 00 08:14:25.902 READ FPDMA QUEUED 60 c0 08 40 59 0d 40 00 08:14:25.885 READ FPDMA QUEUED 60 40 00 00 54 0d 40 00 08:14:25.885 READ FPDMA QUEUED 60 c0 f0 40 4f 0d 40 00 08:14:25.872 READ FPDMA QUEUED Error 7 occurred at disk power-on lifetime: 19 hours (0 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 04 bc 4a 0d 08 Error: UNC at LBA = 0x080d4abc = 135088828 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 08 a8 b8 4a 0d 40 00 19:46:42.241 READ FPDMA QUEUED ef 10 02 00 00 00 a0 00 19:46:42.240 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 e0 00 19:46:42.240 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 00 19:46:42.238 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 19:46:42.238 SET FEATURES [Set transfer mode] Error 6 occurred at disk power-on lifetime: 19 hours (0 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 04 bc 4a 0d 08 Error: UNC at LBA = 0x080d4abc = 135088828 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 08 a0 b8 4a 0d 40 00 19:46:38.922 READ FPDMA QUEUED 60 08 98 b0 4a 0d 40 00 19:46:38.921 READ FPDMA QUEUED 60 08 78 a8 4a 0d 40 00 19:46:38.921 READ FPDMA QUEUED 60 08 70 a0 4a 0d 40 00 19:46:38.921 READ FPDMA QUEUED 60 08 68 98 4a 0d 40 00 19:46:38.921 READ FPDMA QUEUED Quote Link to comment
trurl Posted August 19, 2021 Share Posted August 19, 2021 Post complete SMART report. It should have a line specifically about the test you just ran. Quote Link to comment
coronicus Posted August 19, 2021 Author Share Posted August 19, 2021 Ty so much for helping me.. here is the download smart report. i hoping this is what you were looking for gunraid-smart-20210819-0905.zip Quote Link to comment
JorgeB Posted August 19, 2021 Share Posted August 19, 2021 SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 70% 41 1477270990 SMART test failed, disk should be replaced. Quote Link to comment
coronicus Posted August 19, 2021 Author Share Posted August 19, 2021 sending the drive back.. thanks for the help. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.