August 24, 20214 yr hi, I'm still during my trials but there are some problems with the vm manager. I've set the VM manager like this but after each unsafe power cycle (like power failure), the VM manager won't automatically start and all the configs of it will be set to default, like this why it happened? and how to fix it?
August 24, 20214 yr 23 minutes ago, luxinliang said: after each unsafe power cycle (like power failure) That must not happen. Set up an appropriately sized UPS. Tools, diagnostics, download the zip file and attach it to your NEXT post in this thread.
August 24, 20214 yr Author 43 minutes ago, JonathanM said: That must not happen. Set up an appropriately sized UPS. Tools, diagnostics, download the zip file and attach it to your NEXT post in this thread. thx for your reply, UPS is indeed a need, but I want to make the system more stable and less bugs. diagnostic below is after the power failure unraid-mini-diagnostics-20210824-2354.zip
August 24, 20214 yr Those settings are saved on the flash drive, make some changes and post new diags (before rebooting).
August 24, 20214 yr Author 5 minutes ago, JorgeB said: Those settings are saved on the flash drive, make some changes and post new diags (before rebooting). hi, after re-config the VM manager's settings re-add the vm and restart the array, the diagnostics is also attached below unraid-mini-diagnostics-20210825-0016.zip
August 24, 20214 yr Author 19 minutes ago, JorgeB said: Those settings are saved on the flash drive, make some changes and post new diags (before rebooting). Also, this issue don't pop up with every power failure, it would happen after 1 or 2 constant unsafe power cycles.
August 24, 20214 yr That's very strange, like mentioned the VM settings (not the VM XL) are stored on the flash drive, once store, and they are now, it should never revert back, don't remember seeing this issue before.
August 25, 20214 yr Author 11 hours ago, JorgeB said: That's very strange, like mentioned the VM settings (not the VM XL) are stored on the flash drive, once store, and they are now, it should never revert back, don't remember seeing this issue before. Actually, this issue is similar to the post beside the reverting thing, maybe he didn't change the default settings. I guessthis issue might be ralative to the array or the docker service or both. I'm still during my trial, after each unsafe power cycle, the connection to the offical certification server is somehow later than normal (also the network is not stable in my area), same with the array, thus the VM manager won't start automatically trigering some bugs to revert the settings. Or docker service is boot up earlier than VM service, I also notice when manually start the service after power failure there might be chance unabling to do that, it said "libvirt.img is in use". Turns out, a docker container called "jellyfin" is using it, but I have never passed the libvirt.img folder to docker. So the whole thing is quite weird to me.
August 25, 20214 yr 2 hours ago, luxinliang said: So the whole thing is quite weird to me. It is, and I didn't remember the other one, but like mentioned best thing to do would be getting a UPS.
August 25, 20214 yr Author 3 hours ago, JorgeB said: It is, and I didn't remember the other one, but like mentioned best thing to do would be getting a UPS. ok, thx for your help
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.