Possibility for increasing log details?

[Ulf Thomas Johansen]

I have been running Unraid on my new Ryzen rigg for weeks now, and I absolutely *love* this products. Kudos to everybody involved in making it happen

 

However, I have been struggling with lock ups fairly regularly every 6-7th day for which I cannot find a root cause. I have a Ryzen rig and I have done most, if not all, of the accommodations (S6 and so on) to try to mitigate it, but no luck so far.

 

The log has been mirrored to the sd card, but as you can see from the attached example it does not give me anything valuable. I have also included a photo of the page fault. (A previous lock up contained nearly an identical page fault message on the monitor)

 

Oct 17 22:34:29 Algarheim emhttpd: spinning down /dev/sdb
Oct 17 22:34:29 Algarheim emhttpd: spinning down /dev/sdi
Oct 17 22:47:02 Algarheim emhttpd: read SMART /dev/sdh
Oct 17 22:47:02 Algarheim emhttpd: read SMART /dev/sde
Oct 17 22:47:15 Algarheim emhttpd: read SMART /dev/sdf
Oct 17 23:13:54 Algarheim emhttpd: read SMART /dev/sdb
Oct 17 23:13:54 Algarheim emhttpd: read SMART /dev/sdi
Oct 17 23:16:47 Algarheim kernel: mdcmd (212): set md_write_method 1
Oct 17 23:16:47 Algarheim kernel:
Oct 17 23:19:16 Algarheim emhttpd: spinning down /dev/sdh
Oct 18 07:41:03 Algarheim kernel: Linux version 5.13.8-Unraid (root@Develop) (gcc (GCC) 10.3.0, GNU ld version 2.36.1-slack15) #1 SMP Wed Aug 4 09:39:46 PDT 2021
Oct 18 07:41:03 Algarheim kernel: Command line: BOOT_IMAGE=/bzimage initrd=/bzroot acpi_enforce_resources=lax rcu_nocbs=0-11
Oct 18 07:41:03 Algarheim kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'

Is it possible to get some more details into the log?

I am planning to run memtest, but I have not gotten around to it yet.

 

Any insight would be highly appreciated.

 

//UlfThomas

IMG_8222.HEIC

[JorgeB]

If you haven't yet take a look here:

https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=819173

 

[Ulf Thomas Johansen]

Thanks for responding - and I have indeed studied that page. The ram is properly detected by the bios and the details corresponds to both whats listed at the reseller and producer, but I have also had lock ups without any overclocking or xmp profiling in the bios.