RedXon Posted November 13, 2021 Share Posted November 13, 2021 Now I had some crashes and freezes with this server for some time now but wasn't able to find out what was wrong. In the last thread ( ) I was advised to completely redo my cache array, which I did, and hoped for the best. But unfortunately the server has crashed again. However I did set up a syslog server in order to be able to see what was going on before the crash and I captured this as the last dying gasp: Azeroth kernel: RIP: 0010:nf_nat_setup_info+0x12f/0x6d9 [nf_nat] I have the whole syslog leading up to this in the attachements. I have found a thread with people saying it has to do with their mikrotik network gear but I don't use any mikrotik gear. Has anyone any idea what this is and what I could do? Thanks All-Messages-search-result.csv Quote Link to comment
JorgeB Posted November 13, 2021 Share Posted November 13, 2021 See if this applies to you, if yes, upgrading to v6.10 and switching to ipvlan might fix it (Settings -> Docker Settings -> Docker custom network type -> ipvlan (advanced view must be enable, top right)), or see below for more info.: https://forums.unraid.net/topic/70529-650-call-traces-when-assigning-ip-address-to-docker-containers/ See also here: https://forums.unraid.net/bug-reports/stable-releases/690691-kernel-panic-due-to-netfilter-nf_nat_setup_info-docker-static-ip-macvlan-r1356/ Quote Link to comment
RedXon Posted November 13, 2021 Author Share Posted November 13, 2021 I am on 6.10 RC for a while now which has not changed this behaviour. Unfortunately this prticular server is in a network which does not support VLANs. I will probably upgrade this network to something that supports VLANs but not at the moment unfortunately. I do however use a custom docker net so the containers have an internal IP in the 172.18.0.0/16 range and the external IP (not external on the WAN but external on the LAN) of the server. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.