xxjt2oxx Posted January 5, 2022 Share Posted January 5, 2022 Hey guys, I have a good handle on Unraid, but when it comes to the SMART reports, I have no clue what I'm looking at. I have an old-ish 4TB drive that was flagged with a "Reported uncorrect" warning. Few things- I replaced this drive and it's been in my pile of "old drives" that I'm trying to decide what to do with. I'm setting up a new server on a Supermicro 36 bay, so now that I have room for more drives I want to put any old drives back in that I may have replaced prematurely. The count doesn't look like it's changed in a while, but I do keep getting yellow notifications in Unraid that there's an issue. Can I update this so I only get notified if it increases? I ran an extended SMART test and it completed successfully, the log is attached. Based on this, can I keep using the drive or should I send it to pasture? I have a few more drives I need to revisit, but can somebody point me toward some information that would help me better understand the "replace me" indicators in the SMART report? I'd rather not make a bunch of posts asking people to review them for me if there's an easy way for me to learn how to interpret them. Thanks! Justin ST4000DM004-2CV104_ZFN07LXM-20220105-1305.txt Quote Link to comment
JorgeB Posted January 5, 2022 Share Posted January 5, 2022 Extended SMART test passed so disk is OK for now. Quote Link to comment
xxjt2oxx Posted January 6, 2022 Author Share Posted January 6, 2022 So as long the extended SMART tests pass I'm good to go? Or are there things I should look out for? Quote Link to comment
JorgeB Posted January 6, 2022 Share Posted January 6, 2022 You should monitor the attributes, but if the extended test passes disk is OK. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.