MrYoshii Posted January 28, 2022 Share Posted January 28, 2022 Hello my system seems to freeze regularly and then requires a manual restart. No more action possible, even the numpad led does not turn on anymore. I have already switched on syslog mirroring. The last shuttodwn was around 15:45. Do you have any other ideas? Memtest for 24h without error. homeserver01-diagnostics-20220128-1617.zip Quote Link to comment
JorgeB Posted January 28, 2022 Share Posted January 28, 2022 Possibly this: https://forums.unraid.net/bug-reports/prereleases/69x-610x-intel-i915-module-causing-system-hangs-with-no-report-in-syslog-r1674/?do=getNewComment&d=2&id=1674 Quote Link to comment
MrYoshii Posted February 3, 2022 Author Share Posted February 3, 2022 I have commented out modprobe i915 in the go file now the server runs for 5 days without problems. If there are problems again I'll get back to you. Quote Link to comment
MrYoshii Posted February 21, 2022 Author Share Posted February 21, 2022 Unfortunately, the system froze again after 18 days. Do you have any ideas? Quote Link to comment
JorgeB Posted February 21, 2022 Share Posted February 21, 2022 Enable the syslog server and post that after a crash. 1 Quote Link to comment
MrYoshii Posted March 6, 2022 Author Share Posted March 6, 2022 It crashed again. At the time, I happened to have the dasboard open on the second monitor and saw that the cpu load was 100%. When I wanted to check what was causing this and wanted to connect via ssh, this was no longer possible. Shortly afterwards the system was offline. syslog Quote Link to comment
JorgeB Posted March 7, 2022 Share Posted March 7, 2022 Multiple NMI events logged, these are usually a hardware issue. Quote Link to comment
MrYoshii Posted March 7, 2022 Author Share Posted March 7, 2022 Ok that was also my thought the question is only which hardware... Or how can I find out which one is broken. Quote Link to comment
JorgeB Posted March 7, 2022 Share Posted March 7, 2022 Board/CPU/RAM would be the main suspects. Quote Link to comment
MrYoshii Posted March 7, 2022 Author Share Posted March 7, 2022 I also have a gtx 1050ti and an Adaptec 72405 SAS/SATA controller installed. I have already run memtest for 8h+ and also parity sync and rebulds run without problems. It's really strange. Quote Link to comment
JorgeB Posted March 7, 2022 Share Posted March 7, 2022 One more thing you can try it to boot the server in safe mode with all docker/VMs disable, let it run as a basic NAS for a few days, if it still crashes it's likely a hardware problem, if it doesn't start turning on the other services one by one. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.