January 29, 20224 yr Hi all, When building my array, I accidentally included a small 256G SSD as part of the array. Wanting to use it as a cache drive instead, I took the array off-line, unassigned the drive (Disk 6) and assigned the drive to be the cache device. I then went to tools, new config and preserved the current assignments. I then started the array again and ran a 'check'. As can be seen below, I am still seeing the missing drive in the array and there appears to be no way that I can find to remove it. I am still very new to unRAID so any pointers in how to fix this would be much appreciated. I'm running version 6.9.2. Thanks!
January 29, 20224 yr Community Expert Solution That means the new config wasn't properly done, repeat the procedure.
January 29, 20224 yr Community Expert 5 hours ago, 03fc35ss said: Hi all, When building my array, I accidentally included a small 256G SSD as part of the array. Wanting to use it as a cache drive instead, I took the array off-line, unassigned the drive (Disk 6) and assigned the drive to be the cache device. I then went to tools, new config and preserved the current assignments. I then started the array again and ran a 'check'. As can be seen below, I am still seeing the missing drive in the array and there appears to be no way that I can find to remove it. I am still very new to unRAID so any pointers in how to fix this would be much appreciated. I'm running version 6.9.2. Thanks! When you ran the New Config tool did you make sure that you no longer had the SSD assigned to the array before you tried to start the array (committing the assignments).
January 29, 20224 yr Author Unfortunately, I attempted this a couple of weeks back so I don't recall the exact process I followed. I'm pretty sure the disk (Disk 6 as per the above screenshot) was in the state it is now, 'unassigned'. Any ideas on what I could try next?
January 29, 20224 yr 6 hours ago, JorgeB said: That means the new config wasn't properly done, repeat the procedure.
January 29, 20224 yr Community Expert 3 hours ago, 03fc35ss said: I'm pretty sure the disk (Disk 6 as per the above screenshot) was in the state it is now, 'unassigned'. According to the screenshot the SSD WAS left as assigned so Unraid now thinks it is missing.
January 30, 20224 yr Author 15 hours ago, itimpi said: According to the screenshot the SSD WAS left as assigned so Unraid now thinks it is missing. Okay. So it sounds like I did the wrong thing then. So how can I remove it from there now?
January 30, 20224 yr Community Expert 58 minutes ago, 03fc35ss said: So how can I remove it from there now? On 1/29/2022 at 7:50 AM, JorgeB said: new config wasn't properly done, repeat the procedure.
January 30, 20224 yr Author 3 hours ago, JorgeB said: new config wasn't properly done, repeat the procedure. Okay, so I did the following: Set all shares to use only Disks 1-5 (note 6 is not an option) Screenshot of drive assignments Take array offline Tools -> New config Preserve current assignments -> All -> Yes I want to do this -> Apply Confirmed that drive assignments are still correct Confirmed that array devices is no longer listing disk 6 as 'missing' Started the array This appears to have resolved my issue and the offending drive is no longer showing. I think I did not set all shares to use specific disks previously when attempting this. The array is now re-building parity: Thank you!
January 30, 20224 yr Community Expert I am virtually certain that the step you missed the first time around was to make sure that disk6 was not assigned after New Config was run as restricting which disks a share can use should have no effect. Regardless at least it appears you are now in the state you want
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.