Jump to content

[Solved] Some Content is not visible via Shareview


vanhelm

Recommended Posts

Hello,

 

i have two problems, first, my cache HDD is defektive, it is reallocating sectors,

and i think, therefore the share is r/o.

 

but now i do have a second problem, which seems more important.

 

The second Problem is, the content of a Directory  on a share is no longer visible, but if i use Midnight Commander, and i go, for example to /mnt/disk2/Data-12TB/CBT

i can see, there is the not shown content (it is the same with the other 12 Disks).

Data-12TB is the share name, CBT is the Directoryname which is now, via windows or via view in the shares Tab, empty. Other Directories of this share, seems to be not affected.

 

What can i do, to first, view and access the contents of the directory (CBT) again, and second to replace the faulty cache disc (the cache disc contains 380 MB Data which was not written to the Array, via Mover and some content is spread on the cache Disc and array discs) 

 

Unraid 6.6.7, 13 12TB array Discs, 1 12TB parity Disc, 1 2TB CacheDisc, no Docker, no VMs 16GB RAM, 8 Thread CPU, 155 Days uptime. 1 Data Share.

 

Best regards

 

Reiner

 

Link to comment

Hello,

 

thank you very much for your fast answer,

 

i forgot to add the diagnostic file, it is now added, sorry for not adding it at the beginning.

 

for me, the problem occured, at the time i tried to move the contents of the cache disk

with two manually started mover runs via the main menu,

because i wanted to replace the cache disk with a new one.

but both did not write the content to the array.

And therefore i could not replace the cache disc.

 

 

 

best regards

 

Reiner

 

 

tower-diagnostics-20220201-2219.zip

Link to comment

Looks like your cache drive dropped offline, but also it's SMART is indicating failing now.  You need to replace it.  The dropping offline though is what's causing the issues with the shares.

 

ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   178   178   051    -    4969804
  3 Spin_Up_Time            POS--K   160   141   021    -    8983
  4 Start_Stop_Count        -O--CK   100   100   000    -    687
  5 Reallocated_Sector_Ct   PO--CK   136   136   140    NOW  510
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   048   048   000    -    38634
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    287
192 Power-Off_Retract_Count -O--CK   200   200   000    -    135
193 Load_Cycle_Count        -O--CK   130   130   000    -    211484
194 Temperature_Celsius     -O---K   108   097   000    -    44
196 Reallocated_Event_Count -O--CK   001   001   000    -    509
197 Current_Pending_Sector  -O--CK   198   196   000    -    755
198 Offline_Uncorrectable   ----CK   200   199   000    -    175
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    1
200 Multi_Zone_Error_Rate   ---R--   001   001   000    -    752961

 

Link to comment

Hello Squid,

 

this was what i tried, to empty the cache drive with the mover tasks, 

and replace the cache drive with a new one, but this did not work.

The situation now is, some of the data is spread over the cache drive and the array.

 

How can i replace the cache drive in this situation (not empty, as there is data on it, which is not written back to the array)?

 

best regards

 

Reiner

 

 

Link to comment
  • vanhelm changed the title to [Solved] Some Content is not visible via Shareview

Hello, problem solved.

 

I did the normal cache disk replacement procedure,

although there was data on the not responding old cache disk.

 

The sharecontent seems to be ok (without the data of the defective cache disk) 

The share is not write protected

 

best regards

 

Reiner

 

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...