BZRK Posted February 22, 2022 Share Posted February 22, 2022 Hello Unraid community. I have an older Linux system that failed. I was running a OS disk and two separate drives in a Raid 1 config, OS RAID not hardware. My system failed, not disk, and I am rebuilding the system in UNRAID with two fresh disks. I have plugged in the drives and they show up in unassigned drives in UNRAID The drive were just a mirror of each other in the previous build. How can I mount them in UNRAID to recover data? I am not seeing partitions with a LSBLK command, just eh drive themselves. I believe the RAID was originally configured with ext2 filesystem. Thanks for any advice. Quote Link to comment
Squid Posted February 22, 2022 Share Posted February 22, 2022 Use the unassigned devices plugin (you may also need to install Unassigned Devices Plus to support ext2) Quote Link to comment
BZRK Posted February 25, 2022 Author Share Posted February 25, 2022 I have both of the unassigned devices plugins installed, it does not see any partitions to mount. Quote Link to comment
JonathanM Posted February 25, 2022 Share Posted February 25, 2022 You will need to set up a linux VM and pass both disks through to the VM, then mount them there. Unraid removes the standard linux software RAID module and replaces it with the parity array special sauce. On 2/22/2022 at 6:41 PM, BZRK said: I have an older Linux system that failed. I was running a OS disk and two separate drives in a Raid 1 config, OS RAID Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.