majo23 Posted February 28, 2022 Share Posted February 28, 2022 HI, I have a free 2,5Gb NIC Port on my PC and on my Unraid. The Router has no 2,5Gb ports so PC and Unraid go to the router with their standard 1Gb NICs. To get a nice local speed between PC and Unraid I want to crossover them. I have quick question about the Subnet for the crossover: My LAN subnet is 192.168.0.x/24 with DHCP beginning behind .50 - so i could easily assign static IPs -BUT- isn't it a bit confusing for Windows, if the Crossover IP is within the same subnet? Wouldn't it be wiser, if I gave the 2.5Gb NICs a new subnet? Because then, Windows would instantly know "hey, this IP is not my standard subnet, it is from my second NIC which has 2.5Gb capacity...." Sry for a maybe dumb question Quote Link to comment
Vr2Io Posted February 28, 2022 Share Posted February 28, 2022 (edited) 3 hours ago, majo23 said: I gave the 2.5Gb NICs a new subnet? Yes, set it in different subnet. Edited February 28, 2022 by Vr2Io 1 Quote Link to comment
MAM59 Posted March 1, 2022 Share Posted March 1, 2022 you may consider to use a bridge instead. Put all NICs on Unraid into one Bridge and put your PC just with the 2,5 Port to Uraids 2,5 Port. All packets should pass automatically, you get the higher speed when accessing files on UNRAID. The only drawback is that you PC loses all connection if the UNRAID Server is turned OFF. So it depends on the availibilty of you UNRAID. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.