Adriano Frare Posted March 7, 2022 Share Posted March 7, 2022 Fear Friends, I have tw0 ssd p4-480 connect in /dev/sdc and /dev/sdd , as show below. root@unraid:~# lsscsi [0:0:0:0] disk SanDisk' Cruzer Fit 1.00 /dev/sda [1:0:0:0] disk ATA ST2000DM001-1ER1 CC43 /dev/sdb [1:0:1:0] disk ATA P4-480 60 /dev/sdc [1:0:2:0] disk ATA P4-480 522a /dev/sdd [1:0:3:0] disk ATA WDC WD5000LPVX-7 1A01 /dev/sde [1:0:4:0] disk ATA ST2000DM008-2FR1 0001 /dev/sdf [1:0:5:0] disk ATA ST2000VX008-2E31 CV12 /dev/sdg [2:0:0:0] disk ATA WDC WDS480G2G0A- 0000 /dev/sdh [3:0:0:0] disk ATA ST1000DM003-1CH1 CC47 /dev/sdi [4:0:0:0] disk ATA ST2000DM001-1ER1 CC43 /dev/sdj [5:0:0:0] disk ATA ST1000DM003-1CH1 CC44 /dev/sdk [6:0:0:0] disk ATA ST1000DM003-1CH1 CC47 /dev/sdl [7:0:0:0] disk ATA ST2000DM001-1ER1 CC26 /dev/sdm But Unassigned Devices only show /dev/sdd on Unassigned Devices. But Last week show both SSD correct, i.e., /dev/sdc and /dev/sdd Is There force to recognize ssd /dev/sdc ? Thanks for all Quote Link to comment
JorgeB Posted March 7, 2022 Share Posted March 7, 2022 Please post the diagnostics. Quote Link to comment
Adriano Frare Posted March 7, 2022 Author Share Posted March 7, 2022 (edited) I attached diagnostic file. Thanks unraid-diagnostics-20220307-1415.zip Edited March 7, 2022 by Adriano Frare Quote Link to comment
JorgeB Posted March 7, 2022 Share Posted March 7, 2022 Unraid is seeing both devices with the same ID, they might work if you connect them to the onboard SATA ports (or flash the LSI to IT mode, which you should anyway, but will require a new config). Quote Link to comment
Adriano Frare Posted March 7, 2022 Author Share Posted March 7, 2022 Dear. How I configure LSI for IT MODE ? I don't know ITmode. Thanks for all Quote Link to comment
JorgeB Posted March 7, 2022 Share Posted March 7, 2022 https://wiki.unraid.net/Crossflashing_Controllers Quote Link to comment
Solution Adriano Frare Posted March 7, 2022 Author Solution Share Posted March 7, 2022 Thanks !! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.