Adriano Frare

I solved configuration BIOS on menu SCM to storage-> UEFI. Thanks for all.

I sent the file below. Thaks for help. unraid-diagnostics-20231204-1019.zip

Dear friends, I change motherboard to MACHINIST E5-MR9S and UNRAID 6.12.4 not show hard disk attacheds on board Perc H310. When I used old motherboard, UNRAID recognize all hard disk attached on Perc H310. The MACHINIST E5-MR9S found board Perc H310 when I use command lspci in UNRAID and during boot firmware H310 show disks attaches . I changed many configurations on BIOS MACHINIST E5-MR9S about menu PCI-E but at moment not success. Is there soluction ? Thanks for all.

How to do create ?

The forlderview not shown nothing.

Thank you.

First, thanks for all!! Follow the file for your attention. Thanks again. unraid-diagnostics-20230714-1846.zip

I am using UNRAID version 6.12.3 and enale 10Gb swapfile. wap file exists: ✔ Swap file in use: ✔ Swap file location and filename: /mnt/disks/disco02/swapfile/swapfile Swap file size: 10000.07 MB used: 138.05 MB used 1% But Main not show swap memory.

Dear firends. I am receiving fllow error at /var/log/syslog Jul 19 09:03:17 unraid kernel: traps: IPMI[sel][21184] general protection fault ip:7f2123faaa7c sp:7f2123e64760 error:0 in ld-musl-x86_64.so.1[7f2123f99000+4c000] Jul 19 09:03:44 unraid nginx: 2023/07/19 09:03:44 [error] 10098#10098: *13974 open() "/usr/local/emhttp/status" failed (2: No such file or directory), client: 127.0.0.1, server: , request: "GET /status?full&json HTTP/1.1", host: "localhost" Jul 19 09:03:44 unraid nginx: 2023/07/19 09:03:44 [error] 10098#10098: *13975 open() "/usr/local/emhttp/status" failed (2: No such file or directory), client: 127.0.0.1, server: , request: "GET /status?full&json HTTP/1.1", host: "127.0.0.1" Jul 19 09:03:47 unraid nginx: 2023/07/19 09:03:47 [error] 10098#10098: *14001 "/usr/local/emhttp/api/index.html" is not found (2: No such file or directory), client: 127.0.0.1, server: , request: "GET /api/ HTTP/1.1", host: "127.0.0.1" Jul 19 09:03:47 unraid nginx: 2023/07/19 09:03:47 [error] 10098#10098: *14005 open() "/usr/local/emhttp/us" failed (2: No such file or directory), client: 127.0.0.1, server: , request: "GET /us HTTP/1.1", host: "localhost" Jul 19 09:03:47 unraid nginx: 2023/07/19 09:03:47 [error] 10098#10098: *14006 open() "/usr/local/emhttp/us" failed (2: No such file or directory), client: 127.0.0.1, server: , request: "GET /us HTTP/1.1", host: "127.0.0.1" Jul 19 09:03:47 unraid nginx: 2023/07/19 09:03:47 [error] 10098#10098: *14007 open() "/usr/local/emhttp/status/format/json" failed (2: No such file or directory), client: 127.0.0.1, server: , request: "GET /status/format/json HTTP/1.1", host: "127.0.0.1" Jul 19 09:03:47 unraid nginx: 2023/07/19 09:03:47 [error] 10098#10098: *14008 open() "/usr/local/emhttp/server-status" failed (2: No such file or directory), client: 127.0.0.1, server: , request: "GET /server-status?auto HTTP/1.1", host: "localhost" Jul 19 09:03:47 unraid nginx: 2023/07/19 09:03:47 [error] 10098#10098: *14009 open() "/usr/local/emhttp/server-status" failed (2: No such file or directory), client: 127.0.0.1, server: , request: "GET /server-status?auto HTTP/1.1", host: "127.0.0.1" Jul 19 09:03:47 unraid nginx: 2023/07/19 09:03:47 [error] 10098#10098: *14010 open() "/usr/local/emhttp/server-status" failed (2: No such file or directory), client: 127.0.0.1, server: , request: "GET /server-status?auto HTTP/1.1", host: "localhost" Jul 19 09:03:47 unraid nginx: 2023/07/19 09:03:47 [error] 10098#10098: *14011 open() "/usr/local/emhttp/server-status" failed (2: No such file or directory), client: 127.0.0.1, server: , request: "GET /server-status?auto HTTP/1.1", host: "127.0.0.1" Jul 19 09:03:47 unraid nginx: 2023/07/19 09:03:47 [error] 10098#10098: *14012 FastCGI sent in stderr: "Primary script unknown" while reading response header from upstream, client: 127.0.0.1, server: , request: "GET /admin/api.php?auth=&version=true HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "127.0.0.1" Jul 19 09:03:47 unraid nginx: 2023/07/19 09:03:47 [error] 10098#10098: *14014 FastCGI sent in stderr: "Primary script unknown" while reading response header from upstream, client: 127.0.0.1, server: , request: "GET /admin/api.php?auth=&version=true HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "localhost" Jul 19 09:03:49 unraid nginx: 2023/07/19 09:03:49 [error] 10098#10098: *14021 open() "/usr/local/emhttp/basic_status" failed (2: No such file or directory), client: 127.0.0.1, server: , request: "GET /basic_status HTTP/1.1", host: "127.0.0.1" Jul 19 09:03:49 unraid nginx: 2023/07/19 09:03:49 [error] 10098#10098: *14022 open() "/usr/local/emhttp/stub_status" failed (2: No such file or directory), client: 127.0.0.1, server: , request: "GET /stub_status HTTP/1.1", host: "localhost" Jul 19 09:03:49 unraid nginx: 2023/07/19 09:03:49 [error] 10098#10098: *14023 open() "/usr/local/emhttp/stub_status" failed (2: No such file or directory), client: 127.0.0.1, server: , request: "GET /stub_status HTTP/1.1", host: "127.0.0.1" Jul 19 09:03:49 unraid nginx: 2023/07/19 09:03:49 [error] 10098#10098: *14024 open() "/usr/local/emhttp/nginx_status" failed (2: No such file or directory), client: 127.0.0.1, server: , request: "GET /nginx_status HTTP/1.1", host: "127.0.0.1" Jul 19 09:03:49 unraid nginx: 2023/07/19 09:03:49 [error] 10098#10098: *14025 open() "/usr/local/emhttp/status" failed (2: No such file or directory), client: 127.0.0.1, server: , request: "GET /status HTTP/1.1", host: "127.0.0.1" And some times the webgui stop response. Thanks for all

thanks for help. Solved!!!!

I found file. unraid-diagnostics-20230503-1833.zip

How I need to procedure ? Sorry , but I dont know uraid details. Thanks again

I attached Diag file. Thanks again. unraid-diagnostics-20230504-1044.zip

When I manual reboot.

I have same problem. I attached syslog to verified problem. I searched o problem my server and not found. Thanks for help. unraid-syslog-20230504-0826.zip

Thanks !!

Dear. How I configure LSI for IT MODE ? I don't know ITmode. Thanks for all

I attached diagnostic file. Thanks unraid-diagnostics-20220307-1415.zip

Fear Friends, I have tw0 ssd p4-480 connect in /dev/sdc and /dev/sdd , as show below. root@unraid:~# lsscsi [0:0:0:0] disk SanDisk' Cruzer Fit 1.00 /dev/sda [1:0:0:0] disk ATA ST2000DM001-1ER1 CC43 /dev/sdb [1:0:1:0] disk ATA P4-480 60 /dev/sdc [1:0:2:0] disk ATA P4-480 522a /dev/sdd [1:0:3:0] disk ATA WDC WD5000LPVX-7 1A01 /dev/sde [1:0:4:0] disk ATA ST2000DM008-2FR1 0001 /dev/sdf [1:0:5:0] disk ATA ST2000VX008-2E31 CV12 /dev/sdg [2:0:0:0] disk ATA WDC WDS480G2G0A- 0000 /dev/sdh [3:0:0:0] disk ATA ST1000DM003-1CH1 CC47 /dev/sdi [4:0:0:0] disk ATA ST2000DM001-1ER1 CC43 /dev/sdj [5:0:0:0] disk ATA ST1000DM003-1CH1 CC44 /dev/sdk [6:0:0:0] disk ATA ST1000DM003-1CH1 CC47 /dev/sdl [7:0:0:0] disk ATA ST2000DM001-1ER1 CC26 /dev/sdm But Unassigned Devices only show /dev/sdd on Unassigned Devices. But Last week show both SSD correct, i.e., /dev/sdc and /dev/sdd Is There force to recognize ssd /dev/sdc ? Thanks for all

Both SSD are attached board H310 disk controller. [1:0:1:0]disk ATA P4-480 522a /dev/sdc 480GB [1:0:2:0]disk ATA P4-480 60 /dev/sdd 480GB Thanks again for help.

Dear friends, I have 2 (two) SSDs not format /dev/sdc and /dev/sdd, the unraid server recognize both ssds, but only one show in dashboard. [0:0:0:0]disk SanDisk' Cruzer Fit 1.00 /dev/sda 8.00GB [1:0:0:0]disk ATA ST1000LM024 HN-M 0001 /dev/sdb 1.00TB [1:0:1:0]disk ATA P4-480 522a /dev/sdc 480GB [1:0:2:0]disk ATA P4-480 60 /dev/sdd 480GB [1:0:3:0]disk ATA WDC WDS480G2G0A- 0000 /dev/sde 480GB [1:0:4:0]disk ATA ST2000DM001-1ER1 CC43 /dev/sdf 2.00TB [1:0:5:0]disk ATA ST1000DM003-1CH1 CC47 /dev/sdg 1.00TB [1:0:6:0]disk ATA ST2000DM001-1ER1 CC43 /dev/sdh 2.00TB [1:0:7:0]disk ATA ST2000DM001-1ER1 CC26 /dev/sdi 2.00TB [2:0:0:0]disk ATA ST2000DM008-2FR1 0001 /dev/sdj 2.00TB [3:0:0:0]disk ATA ST2000VX008-2E31 CV12 /dev/sdk 2.00TB [4:0:0:0]disk ATA ST1000DM003-1CH1 CC47 /dev/sdl 1.00TB [5:0:0:0]disk ATA ST1000DM003-1CH1 CC47 /dev/sdm 1.00TB Why dont show/dev/sdd ? Thanks Adriano

Thanks for all. Solved!!!

Dear, Raid Operation dont star automatic. I need manual clik on butto START. Thanks again

Dear, I have unradi server, but the server not mount automatic disk after boot. the disks parity and disks data are OK. Please, I need help. Thanks for all Adriano unraid-diagnostics-20210830-0758.zip