Officero Posted April 4, 2022 Share Posted April 4, 2022 All, Received errors on Disk 3 after a parity check this month. I've attached diagnostics. Could someone take a look? I think I should check filesystem on Disk 3 but wanted to wait. Thanks tower-diagnostics-20220404-1129.zip Quote Link to comment
JorgeB Posted April 4, 2022 Share Posted April 4, 2022 Log is full of connection errors from an unassigned disk, also filesystem issues with disk1, check filesystem on disk1, disconnect or replace cables on the unassigned disk and post new diags after array start. Quote Link to comment
Officero Posted April 10, 2022 Author Share Posted April 10, 2022 On 4/4/2022 at 12:43 PM, JorgeB said: Log is full of connection errors from an unassigned disk, also filesystem issues with disk1, check filesystem on disk1, disconnect or replace cables on the unassigned disk and post new diags after array start. Thanks, I did the above. Attached are new diags. tower-diagnostics-20220410-0829.zip Quote Link to comment
JorgeB Posted April 11, 2022 Share Posted April 11, 2022 You can now re-enable disk3: https://wiki.unraid.net/Manual/Storage_Management#Rebuilding_a_drive_onto_itself Might be a good idea to replace/swap cables just to rule that out if it happens again. Quote Link to comment
Officero Posted April 13, 2022 Author Share Posted April 13, 2022 On 4/11/2022 at 4:18 AM, JorgeB said: You can now re-enable disk3: https://wiki.unraid.net/Manual/Storage_Management#Rebuilding_a_drive_onto_itself Might be a good idea to replace/swap cables just to rule that out if it happens again. Thank you. Quote Link to comment
Officero Posted June 3, 2022 Author Share Posted June 3, 2022 (edited) On 4/11/2022 at 4:18 AM, JorgeB said: You can now re-enable disk3: https://wiki.unraid.net/Manual/Storage_Management#Rebuilding_a_drive_onto_itself Might be a good idea to replace/swap cables just to rule that out if it happens again. I installed a couple drives. One of them had an error on the first parity check. I think there must be a cable issue. I didn't want to start a new topic becasue this seems like the same problem and I should just replace cables. I attached my diagnostics. Could you take a look when you have a chance? tower-diagnostics-20220602-2024.zip Edited June 3, 2022 by Officero Quote Link to comment
JorgeB Posted June 3, 2022 Share Posted June 3, 2022 Yes, looks more like a power/connection problem, suggest checking/replacing cables and rebuilding on top. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.