wall1s Posted April 12, 2022 Share Posted April 12, 2022 (edited) Hey all, so after a electrical problem the raid card in my server (and probably more) died. As a result I had to build a new server. Now the problem I run into is the LSI raid card renamed the disks that were attached to it so they were labeled as SMCxxxxx But removed from the raid card they are now the manufacturer and serial. But thats different and unraid isnt realizing they are the same disk just different interface. Is there any hope for me to recover? Or am I screwed and have to rebuild everything? I had 50+ TB including parity.. So its a big ask. Edited April 12, 2022 by wall1s Quote Link to comment
JorgeB Posted April 12, 2022 Share Posted April 12, 2022 You can do a new config and Unraid will accept the new devices names (assuming you now which disk is which), but could still have a problem if the previous RAID controller used non standard partitions, i.e., you'll get an "invalid partition layout" error. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.