ashman70 Posted April 22, 2022 Share Posted April 22, 2022 Does anyone know if this 10GB network adapter will work in unRAID? Quote Link to comment
JorgeB Posted April 22, 2022 Share Posted April 22, 2022 Not since v6.9.x, driver doesn't build with newer kernel releases. Quote Link to comment
ashman70 Posted April 22, 2022 Author Share Posted April 22, 2022 That is disappointing, do you know if this QNAP 10GB card works? QNAP QXG-10G1T Quote Link to comment
JorgeB Posted April 22, 2022 Share Posted April 22, 2022 Nope, you can try googling it. Quote Link to comment
Clever_Name Posted May 22, 2022 Share Posted May 22, 2022 (edited) I'm using this card (v3.0R black heatsink) and it does work in v6.10.0 and 6.10.1 using default settings, however I'm not getting full transfer speeds. Highest I can get is ~360Mb/s using m.2 (Windows machine) to m.2 cache (Seagate Ironwolf 510 960GB). I also can't change the MTU value from the default 1500 to 9000 without causing a catastrophic error (upon rebooting the server) that results in the server to not boot anymore and have to restore the flash from backup. I assume the error is triggered by the lack of support for the card? I'm also pretty new to the Linux world so I'm slowly learning things as I come across them. Edited May 22, 2022 by Clever_Name Quote Link to comment
tcomputerchip Posted February 8 Share Posted February 8 I am using 6.12.6 2023-12-01 build with the v3.0R and everything works just fine. I did find setting 9000 vs 9014 made a difference. I must set both the server and client to 9014. Also you must enable Jumbo frames on your switch. Configure all clients with the same MTU you intend to interface with the unraid server. I have been up and running for about 6 months. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.