Koshy Posted May 1, 2022 Share Posted May 1, 2022 My HBA had failed and none of the drives connected to the HBA were showing up on unraid. I ordered a new HBA and replaced the one on my server. All the drives now showed up but the parity drive shows up as disabled, the server was off while I got my HBA replaced so it has been over 60 days since the last parity check if that matters. I tried swapping the cables around, tried connecting it to a SATA port on the motherboard but it still showed up as disabled. Then I did an Extended SMART Test on the Parity Drive and everything seemed to go well. I've had 1 reported incorrect sector on my drive for a long time now, other than that I don't see anything wrong with the drive. Can I still use the drive, I've attached the SMART Test results and the diagnostics. tower-smart-20220501-2248.zip tower-diagnostics-20220501-1414.zip Quote Link to comment
JorgeB Posted May 2, 2022 Share Posted May 2, 2022 You need to re-enable parity: https://wiki.unraid.net/Manual/Storage_Management#Rebuilding_a_drive_onto_itself 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.