Xoron Posted May 26, 2022 Share Posted May 26, 2022 (edited) I have two Ironwolf ST8000VN004 7200RPM drives as my Parity Drives. One is less about 9 months old, the the other about 4 months old. Both drives are throwing errors. I've precleared each drive, without any errors Replaced the SATA cable (SFF-8087) that is connected to both drives. Run an extended SMART self test on one of the drives, no errors detected Looking at the smart data, there are no apparent SMART values out of whack I reviewed the diagnostics for the drive, but nothing obvious jumps out. (Attached for review) Looking for suggestions on what might be wrong, and what to look at next to fix this issue (If it's a false error, then suppress it.) Edited May 27, 2022 by Xoron Removed Diagnostic File Quote Link to comment
Xoron Posted May 27, 2022 Author Share Posted May 27, 2022 Thanks for pointing me to that thread @JorgeB. I had searched the forums, but didn't stumble on it myself. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.