X500658 Posted June 18, 2022 Share Posted June 18, 2022 Woke up, booted with plans to build parity disk2 keeps giving read errors until it became unmountable in maintenance mode, xfs_repair -n says "fatal error --i/o error" and now it turned into the Ø array and I don't know anymore is this a PSU problem? tower-diagnostics-20220618-2348.zip Quote Link to comment
trurl Posted June 18, 2022 Share Posted June 18, 2022 10 minutes ago, X500658 said: is this a PSU problem? Do you have some reason to think so? Could be. Some problem communicating with disk. Shutdown, check all connections, SATA and power, including splitters. Quote Link to comment
X500658 Posted June 18, 2022 Author Share Posted June 18, 2022 tried that beforehand and didn't work, and now it does? Weird. Thankfully the files are intact. sadly, now the parity drive is missing although it was detected by my sata hba controller on boot. Again did the shutdown and cable check, still nothing. Do I try again? Quote Link to comment
trurl Posted June 18, 2022 Share Posted June 18, 2022 Check all connections, all disks, both ends, SATA and power, including splitters. Try again and post new diagnostics. Quote Link to comment
trurl Posted June 18, 2022 Share Posted June 18, 2022 Are you bundling your cables? Don't. Each connector must sit squarely on the connection, with no tension on the cable that might cause it to move. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.