fonzie Posted August 14, 2022 Share Posted August 14, 2022 (edited) Lately, my unRAID server (about once a week or maybe less often) gets stuck in a reboot cycle by itself. It randomly will restart the server and starts doing a partiy check (as if it wasn't a clean reboot) then after about 10 minutes it restarts again and the cycle continues. Even if I press the restart button on the unRAID GUI and it cleanly restarts it will still keep on the cycle. The only way to stop it is to physically press the power button, wait a few minutes, then press the power button again to start it back up. Obviously this isn't ideal, as I am usually not home when this cycle starts. I've attached the diagnostics What log or information can I post to get some assistance? It's currently stuck on the reboot cycle as I post this. media-diagnostics-20220813-1922.zip Edited August 14, 2022 by fonzie Quote Link to comment
JorgeB Posted August 14, 2022 Share Posted August 14, 2022 Looks more like a hardware problem, you can enable the syslog server but doubt it will catch anything, PSU, board, RAM would be the main suspects, also UPS if you have one. Quote Link to comment
fonzie Posted August 17, 2022 Author Share Posted August 17, 2022 I don't have a UPS. So once it happens again, turn on syslog server and see if it catches anything? That would be terrible if it were hardware related. Could it be a problem with overheating? I might open the server up and do some cleaning to it. Quote Link to comment
JorgeB Posted August 17, 2022 Share Posted August 17, 2022 4 hours ago, fonzie said: So once it happens again, turn on syslog server and see if it catches anything? No, turn it on before it happens again. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.