BrokenHalo Posted August 14, 2022 Share Posted August 14, 2022 Hello! I've been trying to solve a weird networking issue and hope to find some help with it. The other day I changed the motherboard in my server due to a PCIE-issue and after the usual tinkering everything seems to work fine now except I'm not able to view the apps list and my docker containers also don't seem to be able to connect to the internet. From the Apps tab I get the following error: Download of appfeed failed. Community Applications requires your server to have internet access. The most common cause of this failure is a failure to resolve DNS addresses. You can try and reset your modem and router to fix this issue, or set static DNS addresses (Settings - Network Settings) of 208.67.222.222 and 208.67.220.220 and try again. Alternatively, there is also a chance that the server handling the application feed is temporarily down. See also this post for more information Last JSON error Recorded: Syntax error I tested different DNS-servers (OpenDNS, Cloudflare, Google, etc.) but nothing seems to change. Ping and manual resovling seems to work fine: root@X:~# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_seq=1 ttl=115 time=20.7 ms 64 bytes from 8.8.8.8: icmp_seq=2 ttl=115 time=19.5 ms ^C --- 8.8.8.8 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1002ms rtt min/avg/max/mdev = 19.503/20.083/20.663/0.580 ms root@X:~# ping google.com PING google.com (142.251.36.238) 56(84) bytes of data. 64 bytes from muc11s22-in-f14.1e100.net (142.251.36.238): icmp_seq=1 ttl=118 time=21.4 ms 64 bytes from muc11s22-in-f14.1e100.net (142.251.36.238): icmp_seq=2 ttl=118 time=18.5 ms 64 bytes from muc11s22-in-f14.1e100.net (142.251.36.238): icmp_seq=3 ttl=118 time=18.0 ms ^C --- google.com ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2004ms rtt min/avg/max/mdev = 17.979/19.300/21.418/1.512 ms So I did a "reset" on my networking config, meaning I deleted the old network.cfg from /flash/config, rebooted and tried again, nothing changed. I assigned a fixed IP chained to the MAC-adress of the new motherboard, didn't help. So I'm stuck, I hope someone can point me in the right direction, I've attached the diagnostics zip below. Thanks in advance! ncr-diagnostics-20220814-1427.zip Quote Link to comment
Squid Posted August 14, 2022 Share Posted August 14, 2022 Can you ping raw.githubusercontent.com along with s3.amazonaws.com Quote Link to comment
BrokenHalo Posted August 14, 2022 Author Share Posted August 14, 2022 5 minutes ago, Squid said: Can you ping raw.githubusercontent.com along with s3.amazonaws.com Yes, seems to work fine: root@X:~# ping raw.githubusercontent.com PING raw.githubusercontent.com (185.199.108.133) 56(84) bytes of data. 64 bytes from cdn-185-199-108-133.github.com (185.199.108.133): icmp_seq=1 ttl=59 time=13.2 ms 64 bytes from cdn-185-199-108-133.github.com (185.199.108.133): icmp_seq=2 ttl=59 time=14.2 ms 64 bytes from cdn-185-199-108-133.github.com (185.199.108.133): icmp_seq=3 ttl=59 time=14.0 ms ^C --- raw.githubusercontent.com ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2004ms rtt min/avg/max/mdev = 13.232/13.826/14.231/0.429 ms root@X:~# ping s3.amazonaws.com PING s3.amazonaws.com (52.216.109.229) 56(84) bytes of data. 64 bytes from s3-1.amazonaws.com (52.216.109.229): icmp_seq=1 ttl=235 time=102 ms 64 bytes from s3-1.amazonaws.com (52.216.109.229): icmp_seq=2 ttl=235 time=96.7 ms 64 bytes from s3-1.amazonaws.com (52.216.109.229): icmp_seq=3 ttl=235 time=97.0 ms ^C --- s3.amazonaws.com ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2003ms rtt min/avg/max/mdev = 96.693/98.615/102.192/2.531 ms Quote Link to comment
Squid Posted August 14, 2022 Share Posted August 14, 2022 I'll need to see CA's diagnostics Apps, then Settings Enable Debugging and apply Back within CA after the message reappears click the Debugging link at the very bottom Doubt it'll say anything other than it was unable to download the feed, but you never know. Quote Link to comment
BrokenHalo Posted August 14, 2022 Author Share Posted August 14, 2022 5 minutes ago, Squid said: I'll need to see CA's diagnostics Apps, then Settings Enable Debugging and apply Back within CA after the message reappears click the Debugging link at the very bottom Doubt it'll say anything other than it was unable to download the feed, but you never know. Thanks for helping me this far! See the diagnostics output attached. One interesting thing I found while flying over it is that the date seems to be off, also Unraid shows a 3-year plus system uptime which is nowhere near possible. CA-Logging-20220814-1547.zip Quote Link to comment
Solution Squid Posted August 14, 2022 Solution Share Posted August 14, 2022 15 minutes ago, BrokenHalo said: One interesting thing I found while flying over it is that the date seems to be off, Yeah, that is going to be your entire problem. Both the logs and CA's diagnostics show that the date is March 15, 2019 and SSL fails if the date is significantly out for security reasons. Settings - Date & Time. set the correct date & time and also give the system a couple of ntp servers Quote Link to comment
BrokenHalo Posted August 14, 2022 Author Share Posted August 14, 2022 2 minutes ago, Squid said: Yeah, that is going to be your entire problem. Both the logs and CA's diagnostics show that the date is March 15, 2019 and SSL fails if the date is significantly out for security reasons. Settings - Date & Time. set the correct date & time and also give the system a couple of ntp servers That seems do have done the trick! That was not what I expected it to be Thanks a lot! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.