blk_update_request I/O error

[Strubdog]

I'm getting the following error with one of my drives. Do I have a bad drive? Drive has an error count of 37,000 on the Unraid dashboard. (I'm currently running a parity-sync on a new drive)

 

 

Aug 23 19:03:25 Tower kernel: sd 7:0:0:0: [sdg] tag#730 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06 cmd_age=184s
Aug 23 19:03:25 Tower kernel: sd 7:0:0:0: [sdg] tag#730 CDB: opcode=0x88 88 00 00 00 00 01 02 44 00 d8 00 00 04 00 00 00
Aug 23 19:03:25 Tower kernel: blk_update_request: I/O error, dev sdg, sector 4332978392 op 0x0:(READ) flags 0x0 phys_seg 128 prio class 0
Aug 23 19:03:25 Tower kernel: sd 7:0:0:0: [sdg] tag#731 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06 cmd_age=185s
Aug 23 19:03:25 Tower kernel: sd 7:0:0:0: [sdg] tag#731 CDB: opcode=0x88 88 00 00 00 00 01 02 43 e8 e0 00 00 02 d8 00 00

 

Thanks

[JorgeB]

Please post the diagnostics.

[Strubdog]

Attached

tower-diagnostics-20220824-0534.zip

[JorgeB]

Looks like a disk problem, run an extended SMART test on disk5 to confirm.

[Strubdog]

Okay, thank you for checking it out.

[Strubdog]

Here is the smart report for that drive. I ran an extended test. Would you be able to tell me if I can still use this?

 

Thanks

tower-smart-20220825-0908.zip

[JorgeB]

Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure       30%     55735         6445056640

 

Test failed, disk should be replaced.

[Strubdog]

Okay thanks, I suspected I would need to. It was a WD Green drive. Kinda of amazed how long it lasted.

 

Thanks