maxkra Posted August 27, 2022 Share Posted August 27, 2022 (edited) Dear All, please help! 1. Stopped the array 2. Turned off the server 3. Datached the NVME M.2 drive (used as cache) to install radiators 4. Attached the NVME drive back 5. Could not boot to unraid After going into bios I realized that m.2 drive is not shown in the SATA section anymore Tried installing another NVME drive to the same port and it would not show up in BIOS as well (checked the port/drive health) If you go to BIOS Tools, the initial NVME (cache drive) is not shown in the HDD/SDD Smart Information settings, but is shown in ASUS Secure Erase tool at the same time. Please kindly advice for any potential solution, many thanks in advance! Hardware: MB Asus ROG F450-F Gaming CPU AMD Athlon 200GE NVME Crucial CT500P2SSD8 P.S. Will I lose all my HDD data if Parity was ok at the moment it all happened? Edited August 27, 2022 by maxkra Quote Link to comment
JorgeB Posted August 28, 2022 Share Posted August 28, 2022 Fist you need to fix the Unraid boot problem, photo shows USB disconnects, try a different USB port, ideally USB 2.0, if that doesn't help try a different flash drive. Quote Link to comment
maxkra Posted August 29, 2022 Author Share Posted August 29, 2022 Tried every USB port available. Ended up re-mounting unraid os from backup to the same USB. All works now! Many thanks! I believe I should change the flash in the future. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.