derpuma Posted October 2, 2022 Share Posted October 2, 2022 I have a problem, that my VMs (either MacOS, Windows or Linux have a problem with network being present right after boot into OS, in probably 3 to 4 times out of 10. Usually I have full network access (internet and local network to NAS and other computers) right after booting into OS. But sometimes network is not present and it takes up to 1.5 and 2 minutes before it is available. Any Idea what could cause this behaviour? It is the onboard controller at my Gigabyte Aeorus Pro which is also used by unraid: 06:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03) I have also a 10GBe Ethernetcard with two ports. This network never shows that behaviour. tower-diagnostics-20221002-1039.zip Quote Link to comment
ghost82 Posted October 2, 2022 Share Posted October 2, 2022 My guess is that this shouldn't be related to vms...what about disabling bonding (bond0) and use only br0 bridge? Quote Link to comment
derpuma Posted October 3, 2022 Author Share Posted October 3, 2022 (edited) I disabled bonding and did a few boot ups. But it still takes some time till network is up and running. Maybe a little bit faster like with bonding activated. Maybe this is just the way it is whithout a dedicated NIC for my VM and I have to live with that. What bothered me, was the fact, that network sometimes is there immediatly and sometimes not. Edited October 3, 2022 by derpuma Quote Link to comment
ghost82 Posted October 3, 2022 Share Posted October 3, 2022 Nothing more to advise, sorry, all I know is that my networks are available as soon as I start any vm, virtio, e1000, vmxnet3... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.