vmax5000 Posted October 8, 2022 Share Posted October 8, 2022 I have been running the same server for more than 5 years without this issue, I did have problems in the past with hard drives which turned out to be a power supply issue. That is the only change I have made to the server in over 5 years, no bios changes and no config changes. The only change to the OS was when I upgraded to version 6.11.0 which is my current version. when I power up the server in the morning the log files only contain the data from startup so I didn't think the would be relevant. I don't know when the sever dies but I do know that I have stayed up until 2 AM and there have been no issues. Today I booted up and after running for a while I did see some errors so I downloaded the diags, hopefully there will something of help? ultimate-diagnostics-20221008-1614.zip Quote Link to comment
JorgeB Posted October 9, 2022 Share Posted October 9, 2022 Finding the server powered down is almost certainly a hardware problem, unless you have something powering it off, you can enable the syslog server to confirm, if it's powering off on its own it could just be temps related or other issues, like PSU or board. Quote Link to comment
vmax5000 Posted October 9, 2022 Author Share Posted October 9, 2022 Thanks, last night it did not go down. I'm unclear as to where to find the icon that you pointed to in the link to the docs. Is this the Icon? See attached screen shot. Thanks. Quote Link to comment
JorgeB Posted October 10, 2022 Share Posted October 10, 2022 Not sure what you mean about the icon, as mentioned in the documentation you go to Settings->Network Services->Syslog Server Quote Link to comment
vmax5000 Posted October 10, 2022 Author Share Posted October 10, 2022 I guess I'm confused about how to retrieve the data to look at it. Anyway, thanks for your help, I will read more to figure it out. Thanks again Quote Link to comment
Solution vmax5000 Posted October 23, 2022 Author Solution Share Posted October 23, 2022 I found out what the problem was. After the upgrade to 6.11.0, I don't know if the setting was there in the older build or not, but there was a setting for sleep and it was enabled. I disabled the sleep setting and that fixed the issue. Thanks Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.